Dekarbürize işleminin AISI H13 çeliğinin borlanma davranışına etkisi
Effect of decarburizing treatment on boronizing behaviour of AISI H13 steel
- Tez No: 129084
- Danışmanlar: YRD. DOÇ. DR. KENAN GENEL
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Borlama, Dekarbürizasyon
- Yıl: 2002
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Kaynak Eğitimi Bilim Dalı
- Sayfa Sayısı: 81
Özet
ÖZET
Özet (Çeviri)
EFFECT OF DECARBURIZING TREATMENT ON BORONİZİNG BEHAVIOUR OF AISI H13 STEEL SUMMARY Keywords : Bonding, Decarburisation, HI 3 steel Because Turkey have %63 of boray reserve in the world. Boronizing heat treatment is also very important for us. Bonding have superior characteristic with respect to other thermo-chemical techniques, it has been widely used in wide spread of industrial applications, Boronizing heat treatment is important due to state which our country have 63 percent of borax reserve in the world. It was shown that decarburization as a pre-treatment of bonding increases boride layer thickness and depth of transition zone. After the bonding process at 900°C for 5 hours, hardness of boride layer on the surface of the specimen exceeds 2000 kg/mm2 and thickness of coating layer have 70um order of magnitude. On the other hand, thickness of layer attained 93 um bonded specimen which decarburized at 900°C for 3 hours before the bonding. Hardness of transition zone decreases with increasing boronizing time. However, steels with silicon decreases in hardness moderated by using decarburization treatment. As a result, decarburization can be considered as treatment practice in bonding process to improve strength of transition zone of component subjected to high compressive load. Xll
Benzer Tezler
- 21NiCrMo2 (AISI 8620) çeliğinden yapılmış dişli çarklara karbürleme ile beraber borlama işleminin uygulanması
Boriding process application to gears made of 21NiCrMo2 (AISI 8620) together with carburizing
ARZUM ULUKÖY
Yüksek Lisans
Türkçe
2005
Mühendislik BilimleriPamukkale ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF.DR. AHMET ÇETİN CAN
- H13 sıcak iş takım çeliklerinin aşınma dayanımına düşük sıcaklıklarda nitrasyon işleminin etkisi
Effect of low temperature nitriding on H13 hot work tool steel's wear resistance
ZAFER CAN TEOMAN
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN ÇİMENOĞLU
- Sanayi tav fırınlarında çelik yüzey oksidasyonu ve verimliliğe etkileri
The Surface oxidation of steel in industrial reheating furnaces and its effect on productivity of the mill
ÖMER LÜTFÜ ÇAKIROĞLU
- Farklı takım çeliklerinin sürtünme kaynağında kaynak bölgesinin incelenmesi
Başlık çevirisi yok
MUHARREM YILMAZ
Doktora
Türkçe
1993
Makine MühendisliğiYıldız Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. KUTSAL TÜLBENTÇİ
- Investigation of Co decorated N, S doped reduced graphene oxide (Co/NSrGO) catalysts for oxygen reduction reaction (ORR) and nh3 electrosynthesis through nitrate reduction reaction (NO3RR)
Kobalt gömülü azot ve kükürt katkılanmış indirgenmiş grafen oksit(Co/NS-rGO) katalizörlerin oksijen indirgenmesi ve nitrat indirgenmesi reaksiyonları için incelenmesireaksiyonları için incelenmesi
KAAN ŞİMŞEK
Yüksek Lisans
İngilizce
2024
EnerjiKoç ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. SARP KAYA