Baryum titanatın mikroyapısına stokiometrinin ve SiO2 katkısının etkisi
The effect of stoichiometry and SiO2 addition on the microstructure of barium titanate
- Tez No: 129555
- Danışmanlar: PROF. DR. TEVFİK OSMAN ÖZKAN
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2003
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Üretim Metalurjisi Bilim Dalı
- Sayfa Sayısı: 80
Özet
Baryum Titanat'ın Mikroyapısına Stokiometrinin ve SİO2 Katkısının Etkisi Bu çalışmada, stokiometrinin ve SİO2 katkısının BaTiCVm mikroyapı özelliklerine etkisi incelenmiştir. Numune bileşimleri bu incelemeler için 3 gruba ayrılmıştır. 1. grup numuneler Ba/Ti oranlan 1.0025, 1.0, 0.98 olacak şekilde hazırlanmıştır. SİO2 katkısının mikroyapıya etkisinin incelenmesi için ise Ba/Ti oranı 1.0025, 1.0, 0.98 olan ve 0.02 mol SİO2 içeren ikinci grup numuneler hazırlanmıştır. TİCI3 ilavesinin, toz olarak bileşime katılan TiC^'e göre mikroyapınm homojenliğine etkisini incelemek amacıyla, 3. grup numune bileşimi hazırlanmıştır. Stokiometrik orandaki baryum titanat'a TiCVin molce % 0.2'si TİCI3 olarak ilave edilmiştir. Numuneler klasik seramik üretim yöntemine göre hazırlanarak 1250, 1275, 1300, 1335, 1360°C'de 1, 3, 5, 10 saatlik sürelerde sinterlenmiştir. Tüm numunelerin bulk yoğunluk değerleri ölçülmüştür. Bu ölçüm sonuçlarından, stokiometrik orandaki baryum titanat'a TiCVin molce % 0.2'si TİCI3 şeklinde ilave edilerek hazırlanan kompozisyona ait bulk yoğunluğunun, BaTKVın teorik yoğunluğuna yaklaştığı görülmektedir. SİO2 ilavesinin BaTiCVın bulk yoğunluğunun artmasına neden olduğu bulunmuştur. Yapılan X-ışmlan analizinde Ba fazla numunede tetragonal BaTi03, kübik BaTiÛ3 ve Ba4Tii2C>27 fazları, Ti fazla numunede tetragonal BaTiO^, kübik BaTiC>3, Ba4Tii2027 ve Ba2Tİ50i2 fazlan bulunmuştur. Stokiometrik ve TİCI3 ilaveli kompozisyonda tetragonal BaTiC>3 fazı içermektedir. Optik Mikroskop ve Taramalı Elektron Mikroskobu çalışmasında kompozisyonlann mikroyapı özellikleri incelenmiştir. TİCI3 ve S1O2 ilave edilmiş kompozisyonlar, stokiometrik BaTiC>3, Ba ve Ti zengin kompozisyonlar ile karşılaştırıldığında TİCI3 ve SİO2 ilavesinin BaTiCVın bulk yoğunluk değerlerini ve mikroyapı özelliklerini olumlu yönde etkilediği görülmüştür.
Özet (Çeviri)
The Effect of Stoichiometry and SİO2 Addition on the Microstructure of Barium Titanate In this work, the effect of stoichometry and the SİO2 addition on the microstructure of BaTiC>3 were investigated. The sample compositions were divided into three groups. The first group of samples had Ba/Ti ratios of 1.0025, 1.0 and 0.98. In order to determine the effect of SİO2 addition on microstructure of BaTiC>3, the second group of samples had Ba/Ti ratios of 1.0025, 1.0, 0.98 and contained 0.02 mole Si02. The third group of samples were prepared by adding 0.2 mole% TİO2 as TİCI3 the stoichiometric composition in order to investigate the effect of TİCI3 addition on the microstructural homogenity. All the samples were prepared by conventional ceramic processing method. The samples were sintered at 1250, 1275, 1300, 1335 and 1360°C for 1, 3, 5 and 10 hours. The bulk densities of all the sintered samples were determined. The results showed that samples prepared by adding 0.2 mole% TİO2 as TİCI3 to the stoichiometric composition reached about the theoritical bulk density value of BaTiC>3. The addition of SİO2 to BaTi03 enhanced the densification of BaTiC>3. The XRD studies done on the samples revealed that Ba excess samples formed tetragonal BaTi03, cubic BaTiC>3, Ba4Tii2027 phases and Ti excess samples had tetragonal BaTiC>3, cubic BaTiC>3, Ba4Tii2027 and Ba2TisOi2 phases. The stoichiometric samples and TİCI3 added samples yielded only tetragonal BaTiC>3 phase. SİO2 added samples had tetragonal BaTiC>3, Ba^Ti^C^?, and BazTisOia phases. The microstructural properties of compositions were investigated to the study of Optic Microscobe and Scanning Electron Microscobe. The addition of TİCI3 and SİO2 affected the bulk density of BaTi03 and microstructural properties in positive way compared to the stoichiometric BaTiÜ3 and the compositions rich in Ba and Ti.
Benzer Tezler
- Modification of barium titanate for positive temperature coefficient of resistiviy applications
Baryum titanatın PTC uygulamaları için modifikasyonu
HÜSEYİN YILMAZ
Yüksek Lisans
İngilizce
1997
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF.DR. MUHARREM TİMUÇİN
- Tanen ile modifiye edilmiş baryum titanatın siprofloksasin çözeltisine fotokatalitik etkisi
Photocatalytic effect of tannin-doped barium titanate on ciprofloxacin solution
SERHAT SEZER
Yüksek Lisans
Türkçe
2022
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLHAYAT SAYGILI
- Farklı sıcaklık ve sürelerde hidrotermal metotla üretilen baryum titanatın X-ışınları soğurma katsayısının hesaplanması
Determination of X-ray absorption coefficient coefficient of hydrothermally synthesized barium titanate at different temperatures and varying reaction times
SAYNUR KURTULUŞ
Yüksek Lisans
Türkçe
2016
Fizik ve Fizik MühendisliğiRecep Tayyip Erdoğan ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. SONGÜL AKBULUT ÖZEN
- Baryum titanat nanofiberlerin üretimi ve karakterizasyonu
Production and characterization of barium-titanate nanofibers
AYŞEGÜL SAVAÇ
Yüksek Lisans
Türkçe
2019
Fizik ve Fizik MühendisliğiSüleyman Demirel ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. NALAN ÇİÇEK BEZİR
- Katkılandırılmış PNN-PZT piezoelektrik seramiklerin pozitron yokolma (PALS) tekniğiyle incelenmesi
Investigation of doped PNN-PZT pisoelectric ceramics by positron annihilition lifetime spectroscopy (PALS) technique
FİKRET ÇETİN
Yüksek Lisans
Türkçe
2019
Fizik ve Fizik MühendisliğiMarmara ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. CUMALİ TAV
PROF. DR. UĞUR YAHŞİ