Makine ve makine eğitiminde internet ve web teknolojilerinin etkin kullanımı
Başlık çevirisi mevcut değil.
- Tez No: 136075
- Danışmanlar: DOÇ. DR. SERVET BAYRAM
- Tez Türü: Yüksek Lisans
- Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Eğitim ve Öğretim, Computer Engineering and Computer Science and Control, Education and Training
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2003
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Teknoloji Eğitimi Ana Bilim Dalı
- Bilim Dalı: Teknoloji Eğitimi Bilim Dalı
- Sayfa Sayısı: 149
Özet
ÖZET MAKİNE VE MAKİNE EĞİTİMİNDE İNTERNET VE WEB TEKNOLOJİLERİNİN ETKİN KULLANIMI Bu araştırmanın amacı, 6 farklı ülkeden seçilen 1 'er web sitesinin öğretimsel tasarım kriterleri eşliğinde incelenmesidir. Bu inceleme sonucunda, kullanıcıların beklentileri belirlenmiş ve web sitelerinin kullanıcı beklentileri ne derece karşıladığına bakılmıştır. Bunun sonucunda daha iyi bir web sitesi için nelerin yapılması gerektiği konusunda yol gösterilmek istenmiştir. İnceleme sırasında her bir web sitesi Dr. Nurettin Şimşek tarafından geliştirilen ve geçerlilik, güvenilirliği yapılmış olan değerlendirme formu ile analiz edilmiştir. Formda yer alan her bir maddeye verilen matematiksel puanlar istatistiksel değer olarak yorumlanmıştır. İstanbul Bağcılar İlçesindeki Bağcılar Abdurrahman ve Nermin Bilimli Anadolu Teknik, Teknik ve Endüstri Meslek Lisesinin 2. sınıfında okuyan Motor Bölümü Öğrencilerinin oluşturduğu grupla adı geçen çalışma yapılmıştır. Kısaca analizini yaptığımız Makine ve Makine eğitimi sunan web sitelerinin genel toplamda hiçbirisi başarılı olamamıştır. Bölümler bazında incelendiğinde ise sitelerin büyük bir kısmı 2 ortalamanın altında kalarak başarısız olmuş fakat aralarından birkaçı bazı bölümlerde 2 ortalamanın üzerine çıkarak başarılı sayılmıştır. Web Sitelerinin genel toplamlarda başarısız olmasının nedeni 5 ve 6. bölümlerin taban puan olmasıdır. Bu bölümlerde taban puan alınmasının nedeni, incelenen web sitelerinde alıştırma ve geribildirimin hiçbir şekilde olmamasıdır. Alman taban puanlar genel sonucu etkileyerek ortalamaları düşürmüş ve siteler başarısız bir grafik çizmelerine neden olmuştur. Makine ve makine eğitimi sunan web sitelerinde genel başarının düşük olmasının nedeni olarak tasarım kriterlerinin site yapımında göz ardı edilmiş olması gelmektedir. Öğrencilerin dikkatinin çekilmesi, yazılımla etkileşim kurabilmeleri, ders sürelerinin uygunluğu ve sitelerin ilgi çekecek yönde hazırlanmamış olması sitelerin başarısını düşürmüştür. Bu nedenle ilerde kurulacak makine ve makine eğitimi amaçlı sitelerde bu kriterlere dikkat edilmesi önerilmektedir. Haziran-2003 Serkan ÖZÜDOĞRU VI
Özet (Çeviri)
ABSTRACT The aim of this research is to examine web sites from 6 different countries, with the accompaniment of educational designation criteria. At the end of this research, the expectations of the users has been determined and it has been overlooked to what extent the web sites meet the expectations of the users. At the end of this, it is wanted to direct people on the topic of what should be done for a better web site. During the research, each web site was analyzed with the evaluation form which has been developed and the reliability and the validity of which has been proved by Dr. Nurettin ŞİMŞEK. The mathematical points which were given to each subject in the form has been interpreted as statistical data. This study was performed with a group of students who are studying at the second class of Abdurrahman and Nermin Bilimli Anatolian Technical, Technical and Industrial Occupational High School in Bağcılar neighbor of Istanbul. None of the web sites we analyzed, which gives information and education on machines, has been successful on the total. When analyzed on the basis of sections, most of the web sites have failed getting marks under the average 2, but a few of them have been considered as successful getting marks over average 2 at some sections. The reason of failing of web sites on general total is that sections 5 and 6 are the base points. The reason of getting base points on these sections is that there is no exercise and feedback in these web sites in any way. The base points taken decreased the averages affecting the general results and as caused the sites to have an unsuccessful graphics. The reason of general success to be low at the web sites which gives information and education on machines is that designation criterias were ignored on the construction of the web sites. Getting attention of the students, their interacting with the software, the suitability of the class times and the web sites' having been prepared unattractively decreased the success of the sites. For this reason, for the sites, which give information and education on machines, to be constructed in the future, taking attention to this criteria is suggested. Haziran-2003 Serkan OZUDOGRU VII
Benzer Tezler
- Veri analitiğinin ekonomik etkileri: İnternet yayıncılığında metin tabanlı öneri motoru örneği
Economic effects of data analytics: Text based recommendation engine example in internet publishing
AHMET TEZCAN TEKİN
Yüksek Lisans
Türkçe
2017
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
PROF. DR. NEDİME LERZAN ÖZKALE
DOÇ. DR. BAŞAR ÖZTAYŞİ
- Kullanıcı etkileşimli öğrenim yönetim sistemi (ÖYS) tasarımı
A learning management system (LMS) design with user interactivity
ATİLLA ERGÜZEN
Doktora
Türkçe
2012
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolKırıkkale ÜniversitesiMakine Ana Bilim Dalı
PROF. DR. ŞERAFETTİN EREL
YRD. DOÇ. DR. HALİL MURAT ÜNVER
- E-eğitim ve Gazi Üniversitesi öğrencilerinin e-eğitim konusunda düşüncelerini saptamaya yönelik bir araştırma
E-education and a research aiming to determine the approach of the students of Gazi University against to the e-education
BARIŞ GÖKALP BAYBURTLU
Yüksek Lisans
Türkçe
2005
Eğitim ve ÖğretimGazi ÜniversitesiBüro Yönetimi Eğitimi Ana Bilim Dalı
DOÇ.DR. SEZER KORKMAZ
- Isıtma tesisatı teknolojilerinin internet üzerinden eğitimi için bir uygulama
An application for the education of heating plant technologies on internet
MURAT BARAZ
Yüksek Lisans
Türkçe
2005
Makine MühendisliğiAfyon Kocatepe ÜniversitesiMakine Eğitimi Ana Bilim Dalı
Y.DOÇ.DR. MUHAMMET YÜRÜSOY
- Makine teknolojilerinin internet üzerinden eğitimi için bir uygulama: Yorulma dersinin online öğretimi
An application for the education of machine technologies on intenet: Online education of fatique
GÜNEL YILMAZ
Yüksek Lisans
Türkçe
2005
Makine MühendisliğiAfyon Kocatepe ÜniversitesiMakine Eğitimi Ana Bilim Dalı
Y.DOÇ.DR. MUHAMMET YÜRÜSOY