Amorf malzemeli güç transformatörlerinde çekirdek kayıplarının araştırılması
The Research on the core losses of the power transformers with the amorphous materials
- Tez No: 136294
- Danışmanlar: DR. ZAFER DEMİR
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Güç transformatörleri, Dağıtım transformatörleri, Amorf metal, Silisli sac Elektrik enerjisi
- Yıl: 2003
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektrik Bilim Dalı
- Sayfa Sayısı: 120
Özet
ÖZET
Özet (Çeviri)
THE RESEARCH ON THE CORE LOSSES OF THE POWER TRANSFORMERS WİTH THE AMORPHOUS MATERİALS SUMMARY Keywords : Power Transformers, Distribution Transformers, Amorphous metal, Silicon steel Electrical energy is inevitable energy type because it can be transformed into other types of energy and transmitted to long distances. Electrical energy is transmitted at high voltage and transformed into low voltage with distribution transformers to be used in industry, commercial areas. Although, the power rating of distribution transformers are low, they play an important role in power losses in the system because of their wide spread use. In general, silicon steel is used in distribution transformer. Energy losses of distribution transformers at no load can be decreased and energy saving can be obtained by use of amorphous metal instead of silicon steel. In this study, general the information will be given about distribution transformer and ratio energy losses in the system will be determined in Chapter l.In Chapter 2, the information is given about the type of core materials and a comparison between transformer with silicon steel and amorphous metal is presented. In Chapter 3, energy losses of distribution transformer in the power system is given.Enviromental benefits are determined by using amorphous metal in distribution transformers instead of silicon steel. In Chapter 4, yearly and lifelong energy saving in Sakarya and Turkey is determined by using the guaranteed transformer losses from manufacturers when amorphous metal is used in a distribution transformer instead of silicon steel. XII
Benzer Tezler
- Enerji sistemlerinde kullanılan gerilim transformatörlerinde farklı çekirdek yapılarının analizi
Different core structure analysis of voltage transformers used in the power systems
MUSTAFA CANER AKÜNER
Doktora
Türkçe
1999
Elektrik ve Elektronik MühendisliğiMarmara ÜniversitesiElektrik Eğitimi Ana Bilim Dalı
PROF.DR. İRFAN GÜNEY
- Güç transformatörlerinde çekirdek kayıplarının silisli çelik ve amorf malzeme için karşılaştırılması
A Comperative study of power transformer core losses using silicon-iron cores and amorphous cores
ERCAN ÖKSÜZ
Yüksek Lisans
Türkçe
2000
Elektrik ve Elektronik MühendisliğiHacettepe ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. BAHRİ ERCAN
- Nanokristal nüve malzemesi ile orta frekans güç transformatörünün analizi, tasarımı ve gerçekleştirilmesi
The analysis, design and implementation of the medium frequency power transformer with nanocrystalline core material
SELAMİ BALCI
Doktora
Türkçe
2016
Elektrik ve Elektronik MühendisliğiGazi ÜniversitesiElektrik Eğitimi Ana Bilim Dalı
DOÇ. DR. İBRAHİM SEFA
- Amorf çekirdekli 33/0.4 kV 1MVA dağıtım transformatörü tasarımı ve performans analizi
Amorphous core 33/0.4 kV 1MVA distribution transformer design and performance analysis
FATİH IŞIK
Doktora
Türkçe
2014
Elektrik ve Elektronik MühendisliğiSakarya ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. YILMAZ UYAROĞLU
- Fabrication and characterization of miniaturized fluxgate sensors
Minyatürize edilmiş fluxgate sensörlerin fabrikasyonu ve karakterizasyonu
FATMANUR KOCAMAN
Yüksek Lisans
İngilizce
2019
Mühendislik BilimleriGebze Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. MUHAMMED HASAN ASLAN
DR. ÖĞR. ÜYESİ TURGUT TUT