Geri Dön

Elektrikten ısı elde edilmesinde verim ve maliyet

Efficient and cost in getting heat from electricity

  1. Tez No: 136321
  2. Yazar: MEHMET SÖNMEZALP
  3. Danışmanlar: PROF. DR. ŞERAFETTİN ÖZBEY
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Elektrik enerjisi, mikro dalga, ısı enerjisi, çevre, verim ve maliyet
  7. Yıl: 2003
  8. Dil: Türkçe
  9. Üniversite: Sakarya Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Elektronik Bilim Dalı
  13. Sayfa Sayısı: 128

Özet

ÖZET

Özet (Çeviri)

EFFICIENT AND COST IN GETTING HEAT FROM ELECTRICITY SUMMARY Key words - Electrical energy, heat energy, micro wave, environment, productivity, and cost. In this study, electrical energy which is used in order to obtain heat energy, whether it could be used efficiently and how cost would be able to be reduced, has been investigated. Firstly heat energy obtained by micro wave which has a large application area, is mentioned. Microwave heating, cooking and drying involves many-complex physical processes Although it is widely used in industry and in our houses as microwave ovens, the relationship between the applicator and the load could not be understood with all its aspects, yet. So as to give wright decision on this concept electric and magnetic field components which occurs on the load must be calculated, the power density and heat distribution must be visualised. The cost of a microwave ovens, especially that are designed for industrial processes, are very expensive. It is not possible to process different kinds of loads in the same applicator because of the loads' different properties. Specific designs must be made for different loads. Secondly electrical energy which is used to heat buildings has been compared with other energy sources which are used to heat. The negative effect of alternative sources has been determined. The usage of the electrical energy which is used to heat building efficiently and the reduction of the electrical cost has been investigated. In the last part, the usage of the electrical energy which is used to melt metal in industry efficiently, has been explained. A detailed research of induction and arc furnaces have been done. XIII

Benzer Tezler

  1. Development of multi-layer conductive polymer nanocomposites for electromagnetic shielding application

    Elektromanyetik kalkanlama uygulamaları için katmanlı iletken polimer nano kompozitlerinin geliştirilmesi

    FATMA ZEHRA ENGİN SAĞIRLI

    Doktora

    İngilizce

    İngilizce

    2017

    Bilim ve Teknolojiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. EYÜP SABRİ KAYALI

    PROF. DR. ABDÜLKADİR SEZAİ SARAÇ

  2. Synthesis and characterization of hafnium boride-based ceramic powders

    Hafniyum borür-esaslı seramik tozlarının sentezlenmesi ve karakterizasyonu

    NAZLI AKÇAMLI

    Doktora

    İngilizce

    İngilizce

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. İSMAİL DUMAN

  3. Fotovoltaik/ısıl sistemlerde performans iyileştirmesi ve termo-ekonomik analiz

    Performance improvement in photovoltaic/thermal (PVT) systems and thermoeconomic analysis

    CELALETTİN BAKIR

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Makine MühendisliğiSelçuk Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MUAMMER ÖZGÖREN

  4. Coumarines as masked phenols for amide functional benzoxazines

    Amid fonksiyonlu benzoksazin sentezinde kumarinlerin kullanımı

    BÜŞRA GİZEM KAYA

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Kimyaİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. BARIŞ KIŞKAN

  5. Comparative effects of Ni-Co addition and milling parameters on corrosion resistance behavior of W-Cu based P/M alloys

    Nikel-kobalt ilavesi ve öğütme parametrelerinin toz metalurjisiyle üretilmiş tunsgten-bakır alaşımlarında korozyon direnci davranışına etkisinin karşılaştırmalı incelemesi

    FULYA BAŞAK KUMKUMOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. BURAK ÖZKAL

    DOÇ. DR. YAMAN ERARSLAN