Fe-%12,5Mn-%5,5Si-%9Cr-%3,5Ni alaşımında martensitik dönüşümler üzerine termal ve zor etkilerinin incelenmesi
Investigation of the strees and thermal effects on the martensitic transformations in the Fe-%12,5Mn-%5,5Si-%9Cr-%3,5Ni Alloy
- Tez No: 154903
- Danışmanlar: PROF.DR. MUSTAFA DİKİCİ
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Austenite, Martensite, á Martensite, Martensitik Faz Dönüşümü, Plastik Deformasyon, Zor-Zorlanma Eğrisi, Austenite- Martensite Dönüşüm Sıcaklığı, Dislokasyon, Yığılma Kusurları, Tane Sınırı, Austenite, Martensite, a' Martensite, Martensitic Phase Transformations, Plastic Deformation, Stress-Strain Curve, Austenite- Martensite Transformation Temperature, Dislocation, Stacking Faults, Grain Boundary
- Yıl: 2004
- Dil: Türkçe
- Üniversite: Kırıkkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 134
Özet
Bu çalışmada, şekil hatırlamalı Fe-%1 2,5Mn-%5,5Si-%9Cr-%3,5Ni alaşımında meydana gelen martensitik dönüşümlerin morfolojik, kristalografik, mekanik ve termodinamik özellikleri üzerine termal ve dış zorun etkileri incelendi. Ayrıca termal ve dış zorun etkileri ile austenite yapı içinde meydana gelen dislokasyonların ve yığılma kusurlarının martensite yapı ile etkileşimleri ele alındı. Austenite yapı içinde termal etki ile yalnızca e (h.c.p.) martensite'nin meydana geldiği, dış zorun etkisi ile ise hem e martensite hem de a' (b.c.c.) martensite yapıların meydana geldiği yüzey ve mikro yapı incelemelerinde ortaya çıktı. Austenite kristal içinde oluşan e martensite'nin alışım (habit) düzleminin {111}y düzlemine paralel olduğu ve e martensite fazile austenite faz arasında Shoji-Nishiyama türü kristalografik dönme bağıntısının bulunduğu sonucuna varıldı. Dış zorun etkisi ile s martensite plakalarının kesişme bölgelerinde oluşan a' martensite yapının kristalografik incelemelerinde austenite ve martensite fazların düzlem ve doğrultuları arasında {1 1 1}r // {0001}E // {T01}«-, y // B // ". şeklinde bir ilişki olduğu bulundu ve bunun Kurdjumov-Sachs türü dönme bağıntısına uyduğu görüldü. Bu alaşımda ısıl işlem süresinin artması ile tane (grain) boyutunun büyüdüğü ve martensite miktarının arttığı gözlendi. Yüzey incelemelerinde plastik deformasyon etkisi ile s martensite plakalarının şekillerinin ve yönelimlerinin değiştiği görüldü. Mikro yapı gözlemlerinde plastik deformasyon sonucu yığılma kusurlarının arttığı, martensite plakalarının kalınlaştığı ve bu plakaların kesişme bölgelerinde a' martensite'nin oluştuğu görüldü. Fe-%12,5Mn-%5,5Si-%9Cr-%3I5Ni alaşımında austenite fazda bulunan kristal taneciklerinin büyüklüğünün ve oluşan martensite fazın miktarının alaşımın mekanik özelliklerini nasıl değiştirdiği zor-zorlanma deneyleri ile araştırıldı. Homojenleştirme süresinin ve plastik zorlanmanın artması ile austenite-martensite dönüşüm sıcaklığının arttığı görüldü.
Özet (Çeviri)
In this study, thermal and external stress effects on the martensitic transformations which occured in Fe-%12,5Mn-%5,5Si-%9Cr-%3,5Ni shape memory alloy were investigated from morphologic, crystallographic, mechanic and thermodynamic view points. We also studied the interactions of dislocations and stacking faults, which form in the austenite matrix through thermal and external stress, with martensite matrix. We observed that in the austenite structure e (h.c.p.) martensite occured only with thermal effects and outer external stress both e and a' (b.cc.) martensite structures formed with surface and microstructure analysis. The habit plane of e martensite was found to be parallel to {111}r planes of austenite crystal and its mcrystallographic determinations revealed the existence of Shoji-Nishiyama type orientation relationship between the austenite and s martensite phases. The electron diffraction analysis indicated that the orientation relationship of the a' martensite, which formed due to external stress at the intersection of the e martensite plate's, as {1 1 1}? // {0001}8 // {T01}"-, r // 8 // a', and it was observed that this was in accord to the Kurdjumov-Sachs type orientation relationship. It is observed that by increasing homogenization time, the austenite grain size and the amount of martensite were increased at this alloy. Changes of shape and orientation of s martensite plates with the effect of plastic deformation were revealed with surface analysis. Also as a result of the compression test, increasing of stacking faults density, thickening of martensite plates and a' martensites which form at the intersections of this plates were observed with microstructure analysis. It is investigated that how the size of grains and amount of martensite phase change the mechanical properties of the Fe~%12,5Mn-%5,5Si- %9Cr-%3,5Ni alloy in the austenite phase by stress-strain tests. By the increase of homogenization time and plastic deformation, it was observed that the austenite-martensite phase transformation temperature also increased.
Benzer Tezler
- Mekanik alaşımlama süreçleriyle MoS2-grafit katı yağlayıcı katkılı Fe-C esaslı kompresör parçalarının geliştirilmesi ve karakterizasyonu
Development and characterization of iron based and MoS2, graphite solid lubricant reinforced compressor parts synthesized by mechanical alloying
MERVE UYSAL
Yüksek Lisans
Türkçe
2016
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA LUTFİ ÖVEÇOĞLU
- Fe (1-x) Mn x alaşımının fiziksel özelliklerinin incelenmesi
Investigation of physical properties of Fe (1-x) Mn x alloys
NURCAN ÇEVİK
Yüksek Lisans
Türkçe
2010
Fizik ve Fizik MühendisliğiDumlupınar ÜniversitesiFizik Ana Bilim Dalı
YRD. DOÇ. DR. YAŞAR HAMZA OCAK
- Az alaşımlı ve karbon çeliklerinde borlama ile yüzeye kaplanan borürlerin bazı özelliklerinin tesbiti
Determination of some material properties of borides coated on the surfaces of low alloy and carbon steels
CUMA BİNDAL
- Türkiye'de organik ve geleneksel olarak üretilen bazı hayvansal ve bitkisel ürünlerdeki metal (Kurşun, Kadmiyum, Bakır, Çinko, Demir) düzeylerinin karşılaştırılması
Comparison of metal levels (Lead, Cadmium, Copper, Zinc, Iron) in certain organically and conventionally produced animal and vegetable products in Turkey
EMRE ARSLANBAŞ
Doktora
Türkçe
2010
Veteriner HekimliğiAnkara ÜniversitesiFarmakoloji ve Toksikoloji (Veterinerlik) Ana Bilim Dalı
PROF. DR. EMİNE BAYDAN
- İstanbul Üniversitesi Avcılar Yerleşkesi'nde solunabilir partikül maddenin boyut dağılımının ve element içeriğinin incelenmesi
The investigation of size distribution and elemental characterization of inhalable particulate matter in the Avcilar Campus, Istanbul university
UNDRAL DORJSUREN
Yüksek Lisans
Türkçe
2012
Çevre Mühendisliğiİstanbul ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ÜLKÜ ALVER ŞAHİN