Geri Dön

An Expert system for dryer selection drysel

Başlık çevirisi mevcut değil.

  1. Tez No: 15513
  2. Yazar: Y.REFHAN BERKSUN
  3. Danışmanlar: PROF.DR. TÜRKER GÜRKAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1991
  8. Dil: İngilizce
  9. Üniversite: Orta Doğu Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 124

Özet

KURUTUCU SEÇÎMİ ÎÇÎN BÎR UZMAN SİSTEM: DRYSEL Berksun, Y. Refhan Mühendislik Fakültesi Yüksek Lisans Tezi, Kimya Müh. Bölümü Tez Yöneticisi: Prof.Dr. Türker Gürkan Yardımcı Tez Yöneticileri : Prof.Dr. Canan özgen Doç. Dr. Mehmet R. Tolun Ağustos 1991, 254 sayfa ÖZET Bu çalışmada, termal kurutucuların seçimi için DRYSEL olarak tanımlanan bir uzman sistem geliştirilmiştir. Çalışmada literatürde kurutucu seçimiyle ilgili bilgiler bir sistem içinde düzenlenmiştir. Seçim besleme ve ürün özelliklerine olduğu kadar üretim kapasitesine ve üretim maliyetine de bağlıdır. Bazı özel ürünler için, literatürde sadece sınırlı sayıda kurutucu tipi önerilmektedir. Bunlar için, ürün türü, özel uygulama alanı ve kapasite belirlendiğinde uzman sistem doğrudan uygun olan kurutucu tipini önermektedir. Diğer tür ürünlerin çoğunluğu için ise çok sayıda kurutucu tipi uygundur ve bunların seçimi kapa site, besleme formu, ürün formu ve üretim maliyetine bağlıdır, özel uygulama alanı olan ve ürün türünün belli olmadığı durumlar için karar ağaçları, temel olarak kapasite ve besleme formuna göre geliştirilmiştir. Böylece kesikli ve sürekli işlem biçimleri ve sekiz besleme formu için 16 karar ağacı geliştirilmiştir. Literatürde mevcut bazı kurutucutipleri için, üretim maliyetleri kapasitenin fonksiyonu olarak elde edilmiştir. Tüm bu systematize edilmiş literatür bilgileri kurutucu seçimiyle ilgili kurallar oluşturmak üzere kullanılmıştır. IBM PC uyumlu bir mikrobilgisayarda bir uzman sistem geliştirme aracı olan Texas Instruments“Personal Consultant Plus”(PCPLUS) kullanılarak uzman sistem üretilmiştir. Sistemin bilgi tabanı geri zincirleme stratejisinin kullanıldığı tek bir çerçeveden (frame) oluşmaktadır. Sistem kullanıcıdan sayısal değer olarak sadece kapasite verisini talep etmektedir. DRYSEL kullanıcıya ele alınan materyalin özelliklerine bağlı olarak uygun bir veya birkaç kurutucu tipini üretim maliyetiyle birlikte önermektedir. Anahtar Sözcükler : Uzman' Sistemler, Kurala Dayalı Sistemler, Kurutucu Seçimi, Uzman Sistem Kabuğu Bilim Kodu : 603.02.02 vı

Özet (Çeviri)

AN EXPERT SYSTEM FOR DRYER SELECTION :DRYSEL BERKSUN, Y. Refhan M.S. in Chemical Engineering Supervisor : Prof. Dr. Türker Gür kan Co-Supervisors : Prof. Dr. Canan Özgen Assoc. Prof. Dr. Mehmet R. Tolun August 1991, 254 pages ABSTRACT An expert system to help selection of suitable drying equipment for thermal drying of solids is developed in this study. Work is largely based on systematization of the literature dealing with dryer selection. The choice depends on the properties of the feed and product as well as on the scale of production and cost of the process. For certain products only a limited number of dryers are recommended in the literature. For these, when the product type and the capacity are specified the expert system directly recommends a specific type of dryer. For most of the other classes of products, however, a large number of dryer types are avail able and the choice depends on the factors : capacity, feed form, product form and manufacturing cost. The decision trees for the case when the industry and the product type are not specified are developed basing initially upon the capacity and the feed form. Thus for batch and continuous modes of operation and for the eight feed forms 16 decision mtrees are developed. Manufacturing costs of dryers that are available in the literature are obtained as a function of capacity. These systematized literature information are used to form rules for dryer selection. The expert system is developed and implemented on an IBM PC compatible microcom puter using an expert system building tool namely, Texas Instruments' Personal Consultant Plus (PCPLUS). The know ledge base of the system consists of a frame in which only backward chaining strategy is used. The system requires only capacity data as a numerical value from the user. DRYSEL recommends one or more suitable dryers in accordance with the properties of the feed and of the product. Key jwords : Expert Systems, Rule-Based Systems, Dryer Selec tion, Expert System Shell Scientific Code : 603.02.02 IV

Benzer Tezler

  1. Bazı reaktif boyarmaddelerinin farklı koşullardaki boyama özelliklerinin incelenmesi

    Investigation the dyening properties of some reactive dyes at different conditions

    HAKAN ISIYEL

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYŞEGÜL ERSOY-MERİÇBOYU

  2. Kağıt makinası bilgisayarla kontrolu

    Computer aided control of paper machine

    BÜLENT VURGUN

    Yüksek Lisans

    Türkçe

    Türkçe

    1993

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. KEMAL SARIOĞLU

  3. Kızılötesi destekli kırınım pencereli kurutma sisteminde yüksek kaliteli soğan tozu üretimi

    High quality onion powder production in infrared-assisted refractance window drying system

    ECEM VURAL

    Doktora

    Türkçe

    Türkçe

    2024

    Gıda MühendisliğiAkdeniz Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    PROF. DR. AYHAN TOPUZ

  4. The effects of different pretreatments on drying rate and color kinetics of convective and microwave assisted convective drying of thompson seedless grapes

    Farklı önişlemlerin thompson çekirdeksiz üzümlerinin mikrodalga yardımlı konvektif ve yalnız konvektif kurutulması sırasında kurutma ve renk kinetiği üzerine olan etkilerinin incelenmesi

    GÖKHAN BİNGÖL

    Doktora

    İngilizce

    İngilizce

    2008

    Gıda Mühendisliğiİstanbul Teknik Üniversitesi

    PROF. DR. YUSUF ONUR DEVRES

  5. Gemi kompresör sisteminin FMEA yöntemi ile risk analizi ve önleyici faaliyetlerin belirlenmesi

    Risk analysis and determination of preventive activities of ship compressor system with FMEA method

    HAYDAR BACIOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Denizcilikİstanbul Teknik Üniversitesi

    Deniz Ulaştırma Mühendisliği Ana Bilim Dalı

    PROF. DR. YASİN ARSLANOĞLU