Improvement of software system test process through statistical process control
İstatistiksel süreç kontrolü kullanılarak yazılım sistem test sürecinin iyileştirilmesi
- Tez No: 176970
- Danışmanlar: DR. AYÇA TARHAN
- Tez Türü: Yüksek Lisans
- Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, İstatistik, Computer Engineering and Computer Science and Control, Statistics
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2008
- Dil: İngilizce
- Üniversite: Başkent Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İstatistik ve Bilgisayar Bilimleri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 240
Özet
Yazılım süreçlerinin gelişiminde istatistiksel metodların kullanılması, süreçleri ve onlara ilişkin nicel analizi iyileştirmek için gereklidir. Bu metodların uygulanabilirliği en uygun olan süreçlerden birisi de doğrulama ve geçerleme sürecidir.Bu çalışmada bir proje kapsamında belirlenen test durumlarına, iki sistem test yöntemi (yol ve düğüm), prospektif (ileriye yönelik) şekilde toplanan veriler üzerinde, yöntemleri karşılaştırmak amacı ile istatistiksel metodlar kullanılarak analiz yapılmıştır. Uygulama sırasında daha önce sekiz çalışmada retrospektif (geriye yönelik) olarak kullanılan SPC-AM yönteminden ve istatistiksel araçlardan yararlanılmıştır.Bu çalışma ile;1.Sistem test süreci için belirlenen ölçümlerin yararını anlamak,2.Kullanılan sistem test yöntemlerinin etkinliğini değerlendirerek daha etkin olan yöntemi belirlemek hedeflenmiştir.Çalışma sonucunda sistem test süreci kapsamında uygulanan test yöntemleri için belirlenen ölçümlerin verileri kümeleme yöntemi ile gruplanarak değerlendirilmiş ve süreç için etkili olabilecek yöntemin belirlenen kısıtlara göre uygunluğu konusunda öneride bulunulmuştur.
Özet (Çeviri)
Application of statistical methods on software processes is a required capability to improve processes and their quantitative understanding. Verification and Validation process is one of the most applicable process for these statistical methods.In this study, two different testing techniques (path and node coverage) were applied on the defined test cases of a project, and statistical methods were implemented prospectively (looking forward) to compare these two techniques on prospectivelly collected test case data. While implementing these statistical methods, an assessment model (SPC-AM) and statistical tools were used which had been previously implemented for eight different processes retrospectively (looking back).By this study; it is aimed to:1.Understand the use of measurements defined for the system test,2.Identify which test coverage technique would be useful for the validation process by evaluating the effectiveness of two black-box test coverage techniques.As a result; metric data for test coverage techniques was evaluated by applying process clustering, and suggestions were proposed on the effectiveness of the techniques under related circumstances.
Benzer Tezler
- Farklı insansız hava araçları ile elde edilen görüntülerin otomatik fotogrametrik yöntemlerle değerlendirilmesi ve doğruluk analizi
Examination of images obtained from different unmanned air vehicles via automatic photogrammetric methods and accuracy analysis
DENİZ BİLGE KILINÇOĞLU
Yüksek Lisans
Türkçe
2016
Jeodezi ve Fotogrametriİstanbul Teknik ÜniversitesiGeomatik Mühendisliği Ana Bilim Dalı
PROF. DR. ELİF SERTEL
- Yeni gemi inşaatında kalite güvence modeli olarak ISO 9001
Başlık çevirisi yok
SEMA GÜÇER
Yüksek Lisans
Türkçe
1998
Gemi Mühendisliğiİstanbul Teknik ÜniversitesiGemi İnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. OSMAN AZMİ ÖZSOYSAL
- Bulanık mantık ile belirlenmiş öğrenme stillerine dayalı öğrenme ortamlarının öğrencilerin başarı ve tutumlarına etkisi
The effect of learning environment based learning styles determined by fuzzy logic to students? achievement and attitude
OĞUZHAN ÖZDEMİR
Doktora
Türkçe
2009
Eğitim ve ÖğretimFırat ÜniversitesiEğitim Bilimleri Bölümü
YRD. DOÇ. İBRAHİM YAŞAR KAZU
- ISO 9000 kalite yönetimi ve ISO 14000 çevre yönetim sistemleri uygulamalarının değerlendirilmesi: Türkiye örneği
An Evaluation of ISO 9000 quality management and ISO 14000 environmental management systems implementations: The case of Turkey
BERSAM BOLAT
Doktora
Türkçe
2002
İşletmeİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
PROF.DR. SITKI GÖZLÜ
- Takım çalışması esaslı demontaj hattı işgören atama ve dengeleme problemi için oyun teorisi odaklı yaklaşımlar
Game theory-oriented approaches for multi-manned disassembly line worker assignment and balancing problem
YILDIZ KÖSE
Doktora
Türkçe
2023
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. EMRE ÇEVİKCAN
DR. ÖĞR. ÜYESİ SİNAN ERTEMEL