Analysis of pull type remanufacturing control system
Çekme sistemi ile bir yeniden üretim kontrol sisteminin incelenmesi
- Tez No: 196843
- Danışmanlar: Y.DOÇ.DR. AYBEK KORUGAN
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2006
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 97
Özet
Özet yok.
Özet (Çeviri)
The aim of this study is to evaluate multi-stage kanban controlled hybrid systemswith arbitrary topologies. A hybrid system consists of manufacturing and remanufac-turing subprocesses each dedicated to its respective operation. Both raw materials andreturned parts are used as inputs in the production system and these components areprocessed to produce the ï¬nal product.A product form approximation technique is used to analyze the production sys-tem. The system is modeled as a multi-class closed queuing network. Average numberof items in each queue, throughputs of each stage, WIP levels of each queue, averagenumber of backordered demands and eï¬ective return rates are some of the performancemeasures obtained from the analytical method. The results of the analytical model arecompared with the simulation model and the numerical examples are illustrated. Thena heuristic search method is given to search the minimum cost of the system. Accordingto this method the number of kanbans is determined for each stage. Several numericalexamples are given for possible diï¬erent scenarios for a hybrid system.
Benzer Tezler
- Üretim kaynakları planlaması ve optimize üretim sistemlerinin analizi
Analysis of manufacturing resources planning and optimized production technologd2s
YEŞİM EMANET
Yüksek Lisans
Türkçe
1997
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET TANYAŞ
- Mekanik bağlantılı kompozit yapıların ilerlemeli hasar analizi
Progressive damage analysis of mechanically connected composite structures
ŞEYMA SALİHA PALA
Yüksek Lisans
Türkçe
2020
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ATA MUĞAN
- Tam zamanında imalat sisteminin simülasyon ile analizi ve uygulanabilirliğinin etüdü
An Analysis of the just in time manufacturing system by simulation and a study for its applicability
SEMRA DURMUŞOĞLU
Doktora
Türkçe
1989
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. AYHAN TORAMAN
- Taşıt el fren kablolarında kullanılan metal bağlantı elemanının yorulma davranışının incelenmesi
Investigation of fatigue behaviour of metallic bracket on parking brake cable
SERDAR DALFİDAN
Yüksek Lisans
Türkçe
2016
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. HALUK EROL
- Mobilya köşe birleştirmelerinde kullanılan farklı bağlantı elemanlarının sonlu elemanlar metodu ile mukavemet analizi
Furniture corner joint elements used in connection with the finite element method analysis of strength
SAMET KARABULUT
Yüksek Lisans
Türkçe
2010
Ağaç İşleriKarabük ÜniversitesiMakine Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. H. İBRAHİM DEMİRCİ