Geri Dön

Ekskavatör kollarının tasarımı

Design of working equipment for excavators

  1. Tez No: 198920
  2. Yazar: ÖVÜN VEDAT OYMAN
  3. Danışmanlar: DOÇ. DR. FERHAT DİKMEN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Excavator, construction machine, hydraulic, force analysis, boomJURY:1.Doç. Dr. FHUKDW'ø.0(N (Supervisor) Date:22.12.2005
  7. Yıl: 2005
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 82

Özet

Özet yok.

Özet (Çeviri)

'(6ø*12):25.ø1*(48ø30(17)25(;&$9$7256Övün Vedat OYMANMechanical Engineering, M.S ThesisExcavator is a construction machine that its working system is based on hydraulic andmechanic foundation. Basicly, an excavator comprises three parts called lower structure,upper structure and work equipment. The work equipment is used for performing mainfunctions of an excavator such as digging and loading etc. It consists of a boom, an arm, abucket and three hydraulic cylinders controlled by the operator to put the boom, the arm andthe bucket in a proper position. In addition to, pins are used to make a connection betweenthose main parts and to operate them properly.The working equipment is the most affected part of an excavator by reactive forces because ofthe operation conditions. As a result, force analysis is a vital part of design of the workequipment. The force analysis starts with calculation of a reactive force that affects a bucket.Then force diagrams of every component are drawn to see stress conditions. Strength of everycomponent is controlled regarding to their stress conditions. Finally, every component isshaped into their ultimate forms.The thesis begins with the explanation of structure and hydraulic system of an excavator.Then it is focused on components and the force analysis. It ends with a study of an examplesystem. Mechanical drawings of every component are attached to the end of the thesis.

Benzer Tezler

  1. Ekskavatör kepçesi tasarımı biyomimetik yaklaşım

    Excavator bucket design biomimetic approach

    ALKIN YILMAZ AKTER

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Endüstri Ürünleri TasarımıGazi Üniversitesi

    Endüstriyel Tasarım Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HÜDAYİM BAŞAK

  2. Ekskavatör teleoperasyon sistemi ve kuvvet geri beslemesi kazanımları

    Excavator teleoperation system and force feedback gains

    AHMETCAN ÖNAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Makine MühendisliğiBaşkent Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. ANDAÇ TÖRE ŞAMİLOĞLU

  3. Ekskavatör kolunun yapısal optimizasyon yöntemleri ile ağırlığının azaltılması ve yorulma analizi

    Reducing weight of the excavator arm by structural optimization and fatigue analysis

    SALİH SOYLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Makine MühendisliğiBursa Uludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. YAHYA IŞIK

  4. Dynamic modeling of an excavator during digging and simulating the motion

    Bir ekskavatörün kazı sırasındaki dinamiğini modelleme ve hareketin simulasyonu

    ÖZCAN MUTLU ÖZÜNLÜ

    Yüksek Lisans

    İngilizce

    İngilizce

    2009

    Makine MühendisliğiOrta Doğu Teknik Üniversitesi

    Makine Mühendisliği Bölümü

    PROF. DR. ERES SÖYLEMEZ