Geri Dön

Asenkron motorların hız algılayıcısız kontrolünde yeni bir algoritmanın geliştirilmesi ve uygulaması

A new approach for sensorless speed control of induction motors and its application

  1. Tez No: 198983
  2. Yazar: MUSTAFA GÜRKAN AYDENİZ
  3. Danışmanlar: DOÇ.DR. İBRAHİM ŞENOL
  4. Tez Türü: Doktora
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2005
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 138

Özet

Asenkron motorlar sağlam yapıları, fiyatlarının ucuzluğu ve bakımlarının kolay oluşusebebiyle endüstride en çok tercih edilen elektrik motorlarıdır. 1980'lere kadar cevap vermesürelerinin yavaş olması ve kontrol sistemlerindeki karmaşıklıktan dolayı dijitaluygulamalarda pek kullanılmasalar da, günümüzde vektör kontrolündeki gelişmelerle, cevapverme süreleri iyileştirilerek servo sistemlerde kullanılmaya başlanmıştır. Ayrıca algılayıcısız(hız geri beslemesiz) gerçekleştirilen asenkron motor vektör kontrolü ile, diğer elektrikselsürücü sistemlerine kıyasla, maliyet de önemli miktarda azaltılabilir.Azaltılan maliyet avantajına rağmen, asenkron motorun karmaşık ve değişken parametreleriçeren yapısından dolayı geçici rejimde sorunlar yaşanması, bu motorların endüstriyeluygulamalarda algılayıcısız kontrolde kullanılmasını sınırlamıştır. Bu dezavantajı ortadankaldırmak amacıyla, motorun hız kestiriminin yapıldığı gözlemleyici yapısı üzerine farklıakademik ve endüstriyel çalışmalar yapılmaktadır. Bu tez çalışmasında da en etkin parametredeğişimi olan rotor zaman sabiti değişiminin oluşturduğu olumsuz etki azaltılarak,algılayıcısız kontrolün gerçekleştirilmesi amaçlanmıştır. Bunun için kayan kip yaklaşımı ilerotor zaman sabiti değişimi, Luenberger gözlemleyicisi tabanlı bir gözlemleyiciye ilaveedilerek, bu değişimden daha az etkilenen yeni bir gözlemleyici oluşturulmuştur. Daha sonrabu gözlemleyici asenkron motorun rotor akı yönlendirmeli kontrolünde kullanılmıştır.Kontrol, bilgisayarın ISA yoluna takılan bir kontrol kartının kullanımı ile gerçekleştirilmiştir.Kullanılan kontrol kartında bulunan analog dijital dönüştürücü ile motorun akım ve gerilimbilgileri yazılıma aktarılmış, motora bağlı olan kodlayıcı ile motorun gerçek hızı alınmış veyazılımdan elde edilen kestirilmiş hız ile karşılaştırılmıştır. Bu karşılaştırma sonucunda,sürekli rejimde motorun gerçek hızı ile kestirilen hız arasında büyük bir yakınlık sağlandığıgörülmüştür.Sistem gerçekleştirilmeden önce, Matlab ortamında, oluşturulan gözlemleyici ile rotor akıyönlendirmeli kontrolün simülasyonu yapılmıştır. Bu simülasyon sonuçlarına bakılarakgözlemleyici katsayıları ile diğer katsayılar ayarlanmıştır. Elde edilen sonuçlar karşılaştırmalıolarak verilmiştir. Gerçek zaman uygulamalarında C programlama dili kullanılmıştır.

Özet (Çeviri)

Induction motors are the most preferred electric motors due to having rigid structure, ease ofmaintenance and low cost. Although they were hardly used in digital applications until 1980sbecause of having not only slow response time but also complicated control systems,nowadays they are used in applications of servo systems since vector control algorithm hasenabled to have improved response time. The costs can be reduced further compared to otherelectric drive systems with the sensorless (without velocity feedback) control of inductionmotor.Despite the advantage of reduced costs, the complicated structure of induction motorinvolving variable parameters causes problems in transient response. This fact has limited theuse of sensorless control for induction motors in industrial applications. There have beenvarious efforts from the industry and academia on the structure of observers estimating themotor velocity with the aim of eliminating this limitation. In this thesis, by reducing theadverse effect caused by the variation of the rotor time constant, which is the most effectiveparameter, realization of the sensorless control of induction motor is aimed. For this purpose,a new observer, which is less affected by the parameter variation, is designed with thecombination of sliding mode approach and Luenberger observer. The new observer is thenused in the rotor flux oriented vector control of induction motor. The control hardware isrealized by using a motion control card on a computer. By means of the analog-to-digitalconverter on the motion control card, the current and voltage values of the motor aretransferred to the control algorithm software. The actual speed of the motor obtained from theencoder is compared with the estimated speed computed by the software. Experimental resultshave shown that the estimated speed converged to measured speed in steady state.Prior to the realization of the system, the simulations of the rotor flux oriented control byusing the proposed observer are performed in MATLAB. The observer constants and thecontrol parameters are adjusted according to the simulation results. The comparative resultsand related overall conclusions are presented. Last but not least, C programming language isused for the real-time applications.

Benzer Tezler

  1. Asenkron motor sürücüleri için kestirim algoritmalarının geliştirilmesi ve gerçek-zamanlı uygulamaları

    Developments and real-time implementations of estimation algorithms for induction motor drives

    RIDVAN DEMİR

    Doktora

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik MühendisliğiNiğde Ömer Halisdemir Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MURAT BARUT

  2. Wide speed sensorless control of PMSM drive with smooth transition between HFSİ and extended luenberger observer

    Yüksek frekanslı sinyal enjeksiyon ve genişletilmiş luenberger gözlemci arasında sorunsuz geçiş ile geniş hız aralığında SMSM sürücünün sensörsüz kontrolü

    MUSTAFA MUS AB AVCI

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. SALİH BARIŞ ÖZTÜRK

  3. Yenilikçi bir aşırı modülasyon tekniği ve kompleks akım kontrolörü tasarımı ile algılayıcısız cer motoru kontrolü

    Sensorless traction motor control with innovative overmodulation technique and complex current controller design

    GÖKHAN ALTINTAŞ

    Doktora

    Türkçe

    Türkçe

    2023

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DERYA AHMET KOCABAŞ

  4. Yeni̇ bi̇r MRAS yöntemi̇ i̇le üç fazli asenkron motorun algilayicisiz vektör kontrolü

    Yeni bir MRAS yöntemi ile üç fazlı asenkron motorun algılayıcısız vektör kontrolü

    ALİ SAFFET ALTAY

    Doktora

    Türkçe

    Türkçe

    2014

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. AHMET FAİK MERGEN

  5. Sürekli mıknatıslı senkron motorda algılayıcısız kontrol yöntemini geliştirmeye katkılar

    Contributions to improve the method of sensorless control of PMSM

    GÖKHAN ALTINTAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. DERYA AHMET KOCABAŞ