Computer aided design and analysis of frame crame
Kafes kiriş bumlu krenin bilgisayar destekli tasarımı ve analizi
- Tez No: 202603
- Danışmanlar: DOÇ. DR. MİNE DEMİRSOY
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2005
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 122
Özet
Özet yok.
Özet (Çeviri)
Steel has been used to construct bridge, building, and machine industry etc. for manyyears. Designers often make some arrangements related to shape of the designs to obtainminumum weight, minumum cost etc.In this stduy, connection point of frame crane was analyzed and investigated stressdisributions of connection point components. The commercial finite element packageANSYS 6.1 program was used for finite element analysis. The used elements in the meshesare Tetrahedral Structural Solid Elements with ten nodes. Rivet holes of connection plateand angles was drilled, distances of these holes center related to rivet diameter. Thesedistances were varied 1,5d, 2d, 2,5d, 3d. Thicknesses of the connection plate were variedfrom 12 mm. to 16 mm. Every connection plate for one thickness was analyzed fourdifferent rivet distances and was investigated stress distributions. In addition of theseanalysis two connection point were modeled together and analyzed by using contactelement every touching surface.The results shows that maximum stress occurs around rivet holes and compared together.Stress distributions spread out by decreasing rivet distances.
Benzer Tezler
- Bilgisayar destekli tasarımda sonlu eleman analizi için otomatik ağ yapısı oluşturulması
Automatic mesh generation techniques for finite element analysis
DERYA VAROL
- Yakın resim fotogrametrisinde mikrofotogrametrik uzman sistem tasarımı, tesisi ve kalibrasyonu
A micro-photogrammetric expert systems design, application and calibration in close range photogrammetry
BAHADIR ERGÜN
Doktora
Türkçe
2003
Jeodezi ve Fotogrametriİstanbul Teknik ÜniversitesiJeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
PROF. DR. ORHAN ALTAN
- Uçakların girdap kafes yöntemiyle aerodinamik analizi
Aerodynamic analysis of aircrafts by vortex lattice method
EMRE ŞAHİN
Yüksek Lisans
Türkçe
2013
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. MAHMUT ADİL YÜKSELEN
- Mekan tasarlama, temsil, deneyimleme yöntemi olarak sinematografik kavramlar
Cinematographic notions as a method for space design, representation, experimentation
MÜGE KUZUBAŞIOĞLU
Yüksek Lisans
Türkçe
2014
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. AHMET ARDA İNCEOĞLU
- Hidrolik asansörlerin bilgisayar yardımıyla analizi
Computer aided analysis of hydraulic elevators
ABDÜLHAMİT ADSOY
Yüksek Lisans
Türkçe
2017
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERPİL KURT HABİBOĞLU