Geri Dön

Sanayi yapılarında planlama (tasarım/yapım/kullanım) ilkeleri ve Kütahya bölgesinin irdelenmesi

Planning principles in industrial buildings (design/construction/usage) and explication of Kütahya region

  1. Tez No: 212623
  2. Yazar: KEMAL SARI
  3. Danışmanlar: PROF. CENGİZ BAYÜLGEN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mimarlık, Architecture
  6. Anahtar Kelimeler: Kütahya bölgesi, sanayi yapısı, yapısal sorun, yapısal konfor, yapısal planlama, Kütahya Region, industrial building, structural problems, structural comfort, structural planning
  7. Yıl: 2007
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Mimarlık Ana Bilim Dalı
  12. Bilim Dalı: Yapı Bilim Dalı
  13. Sayfa Sayısı: 158

Özet

Sanayi yapılarının, ülkemiz ekonomisinde büyük bir pay sahibi olması ve günümüzde sanayi sektörüne verilen devlet teşviklerinin artması, bu yapıların sürekli bir biçimde gelişime ve teknolojiye ayak uydurma zorunluluğunu getirmiştir. Bununla birlikte, oluşan rekabet ortamı da bu süreçte belirleyici unsurlar arasında yerini almıştır. Mimarın bu süreçteki asli vazifesi, gelişen teknolojiyi ve oluşan rekabet ortamını iyi kavrayıp, ihtiyaçlara cevap verebilen, çevreye uyumlu, ekonomik, her türlü gelişime açık, en kısa sürede faaliyete geçebilecek sanayi yapılarını tasarlayıp uygulamaktır. Ortaya konulan bu çalışmada, sanayi yapılarına ait mimari ve yapısal planlama verileri anlatılmış, sanayi yapılarının tasarım, planlama, uygulama ve uygulama sonrası ortaya çıkan veya çıkması muhtemel olan sorunlara değinilmiş, bu sorunların seçilen model alanda (KÜTAHYA BÖLGESİ) irdelemesi yapılmıştır. Model alanda (KÜTAHYA BÖLGESİ) seçilen sanayi yapılarında, gözlemlenen yapısal sorunların ortaya konulması ve çözümlenebilir olanların mevcut durumlar göz önüne alındığında, hangi yollarla çözüme kavuşturulacağının tespitinin yapılması, Kütahya Bölgesi'ne ait bir kazanç olarak geri dönmesi hedeflenmiştir. Sonuç olarak, model alanda (KÜTAHYA BÖLGESİ) seçilen sanayi yapılarında yapılan incelemelerde, yapısal konfor koşullarına, tasarım, planlama ve uygulama aşamasında yeteri kadar dikkat edilmediği gözlemlenmiştir.

Özet (Çeviri)

Industry building?s being a good allottee in our country?s economy and increase of environment promotion in the area of industry have brought the necessity of keeping step with the development and technology for these industry buildings. All the same, the competitive atmospherehas taken its place as determining factor in this process. The fundamental duty of an architect in this process is to apprehend wisely the developing technology and competitive atmosphere, to provide the needs, to be compatible with the environment, economical, to be open to the every development and to project industry buildingsthat will go into action as soon as possible and then to apply these projects. In this study, the original data of architectural and structural planning of industrial buildings is explained, the design of them, applyings, plannings, the problems appearing or likely to appear after applying are mentioned and investigation of these problems for chosen area (KÜTAHYA REGION) is made. The structural problemsof chosen industrial buildings of model area is targetted. Additionally finding the ways of solution of the problems which are likely to be solved is targetted t oto back to (KÜTAHYA REGION) as a gaining. Finally, in the investigations conducted in the industrial buildings of chosen area (KÜTAHYA REGION). It is observed that conditions of structural comfort is neglected in the process of desinging, planning, and applying.

Benzer Tezler

  1. Kütahya II. Yakub Çelebi (Ulu Cami) külliyesi'nin işlevsel sistemleri, döngüsel ekonomideki rolü ve çağdaş teknolojiye uyarlanma potansiyeli

    Functional systems of Kutahya II. Yakub Çelebi (Grand Mosque) complex, its role in the circular economy and adaptation potential to modern technology

    BETÜL ANKARALIGİL

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    MimarlıkNecmettin Erbakan Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. GÜLŞEN DİŞLİ

  2. Kıyılarda yer alan eski endüstri alanlarının değerlendirilmesi: Paşabahçe cam fabrikası için yeniden kullanım önerisi

    Benefitting former industrial places in coastal areas: A reuse suggestion for Paşabahçe glass factory

    AHMET GÜN

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    Mimarlıkİstanbul Teknik Üniversitesi

    Kentsel Tasarım Ana Bilim Dalı

    PROF. DR. NURAN ZEREN GÜLERSOY

  3. Türkiye'de su hakkı

    The right to water in Turkey

    YILDIZ AKEL ÜNAL

    Doktora

    Türkçe

    Türkçe

    2021

    HukukGalatasaray Üniversitesi

    Kamu Hukuku Ana Bilim Dalı

    PROF. DR. ERDOĞAN BÜLBÜL

  4. Toplu konut alanlarında biçimsel yapının mekan dizimi yöntemiyle değerlendirilmesi: Eskişehir örneği

    Evaluation of morphological structure in mass housing area by space syntax method: Eskişehir case

    OSMAN TUTAL

    Doktora

    Türkçe

    Türkçe

    1999

    Şehircilik ve Bölge Planlamaİstanbul Teknik Üniversitesi

    PROF.DR. FULİN BÖLEN

  5. La proposition D'Un modéle de direction et de l'organisation pour le secteur de sous industrie de l'automobile Turque

    Türk otomotiv yan sanayi için yönetim ve organizasyon modeli önerisi

    SERKAN ANDI

    Yüksek Lisans

    Fransızca

    Fransızca

    2004

    Endüstri ve Endüstri MühendisliğiGalatasaray Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF.DR. ETHEM TOLGA