Preparation and characterization of polyurethane micro and nanocomposites
Poliüretan mikro ve nanokompozitlerinin hazırlanması ve karakterize edilmesi
- Tez No: 223520
- Danışmanlar: PROF. DR. FATMA SENİHA GÜNER
- Tez Türü: Doktora
- Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
- Anahtar Kelimeler: Poliüretan, Nanokompozit, Mikrokompozit, Kil, Selüloz, Karbon fiber, Polyurethane, Nanocomposite, Microcomposite, Clay, Cellulose, Carbon fiber
- Yıl: 2007
- Dil: İngilizce
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Malzeme Bilimi ve Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Malzeme Bilimi ve Mühendisliği Bilim Dalı
- Sayfa Sayısı: 122
Özet
Bu çalısmada, endüstriyel poliüretan ile nanokompozitler ve mikrokompozitler hazırlanmıstır. Poliüretan nanokompozit hazırlamak için doğal, sentetik killer ve selüloz kullanılmıstır. Poliüretan mikrokompozit hazırlamak için selüloz ve karbon fiber kullanılmıstır. Hazırlanan malzemelerin mekanik özellikleri ve ısıl dayanım özellikleri incelenmistir. Çekme-uzama testleri, dinamik mekanik analizler ve sıcaklık kütle kaybı testleri yapılmıstır. Poliüretan-kil nanokompozitlerinin yapısı geçirimli elektron mikroskobunda incelenmistir. Bu amaçla tez kapsamında gelistirilen yeni bir numune hazırlama yöntemi kullanılmıstır. Hazırlanmıs olan nanokompozitler ile mukavemetlerde çok önemli artıslar gözlenmistir. Doğal killeri organik yüzey aktiflerle muamele etmeden poliüretan ile nanokompozit elde edilmistir. Doğal hektorit kili ile ticari sentetik hektorit kilinden çok daha basarılı sonuçlar elde edilmistir. Yapılan poliüretan-selüloz nano ve mikro kompozit çalısmasında ise, aynı malzeme ile nano boyutta güçlendirmenin mikron boyuta göre çok daha etkin olduğu ve nanokompozitlerin mikrokompozitlere çok daha saydam olduğu tespit edilmistir. Son asamada ise hazırlanmıs olan malzemeler poliüretan karbon fiber kompozitleri ile karsılastırılmıstır ve karbon kompozitlerin kil nanokompozitlerine göre mukavemeti arttırmada çok daha etkili oldukları saptanmıstır. Ancak killerin doğada kolaylıkla bulunabiliyor olması kil çalısmasını değerli kılmaktadır. Doğada çok bulunabilen selüloz ile hazırlanan nanokompozitlerin en yüksek mukavemet değeri verdiği gözlenmistir.
Özet (Çeviri)
In this study nano and micro composites of industrial polyurethane has been prepared. To prepare nanocomposites, natural clays, synthetic clay and cellulose have been used. To prepare microcomposites, cellulose and carbon fiber have been used. The prepared materials have been mechanically and thermally tested. The materials have been tested with tensile testing, dynamic mechanical analysis and thermal gravimetric analysis. The structure of polyurethane-clay nanocomposites have been investigated with transmission electron microscopy. For this purpose within the scope of the thesis, a novel Sample preparation technique has been developed. The mechanical properties of the polyurethane has been increased with clays. Nanocomposites have been obtained without organic modification of the clays. Better improvements have been achieved with the natural hectorite compared to the synthetic hectorite. With polyurethane-cellulose materials, using the same cellulose material, the importance of nanosize reinforcement has been demonstrated with increased transparency compared to the microcomposites. And finally, these materials have been compared with the polyurethane-carbon fiber microcomposites. It has been observed that polyurethane-carbon fiber composites have higher strength compared to the clay nanocomposites. On the other hand clays being abundant in nature and cheap are imprtant family for the reinforcement of polymers. The cellulose being abundant in nature as well has been the best reinforcing phase for the polyurethane.
Benzer Tezler
- Preparation and characterization of thermoplastic polyurathene nanocomposites and their hybrid composites
Termoplastik poliüretan nanokompozitler ve hibrit kompozitlerin hazırlanması ve karakterizasyonu
SALMA A.TAHER MOHAMMED
Yüksek Lisans
İngilizce
2017
Kimya MühendisliğiAtılım ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. SEHA TİRKEŞ
- Synthesis and characterization of silicate nanocomposites containing polyurethane/cyclohexanone formaldehyde copolymers
Silikat nanokomposit içeren poliüretan/siklohekzanon formaldehit kopolimerlerin sentezi ve karakterizasyonu
GÜLÜZAR ÇİÇEK MÜJDECİ
Yüksek Lisans
İngilizce
2014
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN
- Lityum iyon batarya uygulamaları için polipirol esaslı anot bağlayıcılar
PPY based anode binder for lithium ion battery application
IŞIK İPEK AVCI
Yüksek Lisans
Türkçe
2017
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. BELKIZ USTAMEHMETOĞLU
- Poliüretan/polipirol kompozit nanolif, ince film üretimi ve karakterizasyonu
Preparation and characterization of polyurethane/ polypyrrole composite nanofiber, thin film
MELTEM YANILMAZ
Yüksek Lisans
Türkçe
2010
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. HALE KARAKAŞ
PROF. DR. FATMA KALAOĞLU
- Polimer emdirme yöntemi ile titanyum esaslı açık hücreli köpük üretimi ve karakterizasyonu
Production and characterization of open cell titanium based foams by polymer replication method
GÖKÇE ÇALIŞAN
Yüksek Lisans
Türkçe
2018
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ÖZGÜL KELEŞ