Geri Dön

Asenkron motor hızının sensörsüz olarak belirlenmesi

Speed estimation of induction motor

  1. Tez No: 232727
  2. Yazar: LEVENT BAYRAM
  3. Danışmanlar: PROF.DR. DOĞAN DİBEKÇİ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2007
  8. Dil: Türkçe
  9. Üniversite: Kocaeli Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 101

Özet

Özet yok.

Özet (Çeviri)

The induction motor is the most widely used electrical motor in industrial applications. The majority of induction machines are used in constant speed drives, but during the last decades the introduction of new semiconductor devices has made variable speed drives with induction machines available. Variable speed induction motors are usually fed by open loop frequency inverters. The rotor speed of the machine is not measured, and a change in load torque will result in a change in speed. The dynamic performance is weak and problems such as oscillations are common. All those properties are obtained with vector controlled induction machines The drawback of this method is that the rotor speed of the induction machine must be measured, which requires a speed sensor of some kind, for example a resolver or an incremental encoder. The cost of the speed sensor, at least for machines with ratings less than 10 kW, is in the same range as the cost of the motor itself. The mounting of the sensor to the motor is also an obstacle in many applications. A sensorless system where the speed is estimated instead of measured would essentially reduce the cost and complexity of the drive system. This work focuses on observers estimating speed for induction machines.

Benzer Tezler

  1. Sirkülasyon pompası uygulamalarında kalıcı mıknatıslı senkron motorun vektör kontrolü ve EEI optimizasyonu

    Vector control of pmsm in circulation pump application and an adaptive approach for EEI optimization

    MUTULLAH EŞER

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Elektrik ve Elektronik MühendisliğiTOBB Ekonomi ve Teknoloji Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. COŞKU KASNAKOĞLU

  2. Design and implementation of sensorless vector controlled drive for PMSMs

    Sürekli mıknatıslı senkron motorlar için sensörsüz vektör kontrollü sürücü tasarımı ve gerçeklenmesi

    BURAK GÖRDÜK

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MURAT YILMAZ

  3. Asenkron motorun genişletilmiş Kalman filtreli sensörsüz vektör kontrolü

    Sensorless vector control of induction motor using extended Kalman filter

    MERT ALTINTAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Elektrik ve Elektronik MühendisliğiEge Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ÖZKAN AKIN

  4. Vektör kontrollü hız sensörsüz asenkron motor için HFSTSMC hibrit denetleyici ve AGSTSMO hız gözlemci tasarımı

    HFSTSMC hybrid controller and AGSTSMO speed observer design for vector controlled speed sensorless induction motor

    ABDÜLHAMİT NURETTİN

    Doktora

    Türkçe

    Türkçe

    2022

    Elektrik ve Elektronik MühendisliğiKırıkkale Üniversitesi

    Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. NİHAT İNANÇ

  5. Asenkron motorun sensörsüz alan yönlendirmeli vektör kontrollü bir hız tahmin yönteminin geliştirilmesi

    Development a field oriented controlled sensorless speed estimation method of induction motor

    SADIK ÖZDEMİR

    Doktora

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik MühendisliğiYıldız Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. NURETTİN UMURKAN