Perde-çerçeve sistemlerin yatay yüklere göre çözümleri ve bilgisayar programı geliştirilmesi
Başlık çevirisi mevcut değil.
- Tez No: 23726
- Danışmanlar: DOÇ.DR. ŞERİF SAYLAN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1992
- Dil: Türkçe
- Üniversite: Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 132
Özet
Bu yüksek lisans tezi çalışmasında, Birleşik çerçeve ile Perde-çerçeve sistemlerin yatay yüklere göre hesabı incelenmiştir. Birleşik çerçeve ve farklı düzlemlerde bulunan Perde-çerçeve olmak üzere iki sistem ele alınmıştır. Her iki sistem için FORTRAN IV ile bilgisayar programı geliştirilmiş ve çözümleri yapılmıştır. Çözüm sisteminde perde, sonlu elemanlar yöntemi ile çerçeve kısmı ise rijitlik matrisi yöntemi ile çözülmüş ve kesit tesirleri bulunmuştur. Sistemlerin çözümünde, perdeyi sonlu elemanlar yöntemi ile çözerken, eleman düğüm noktalarında iki veya üç serbestlik derecesi bulunan dikdörtgen elemanlar seçilmiştir. örnek çözümlerden elde edilen sonuçlar literatürdeki diğer metotlarla elde edilen sonuçlarla karşılaştırılmıştır.
Özet (Çeviri)
In this post graduate research study, the calculation of combined frame and shearwa 11 -frame systems were examined. Two systems namely combined frame and shearwa 11- frame on different surfaces were studied. A computer program with FORTRAN IV was developped for both systems and their solvings were made. In the solving system the method of stiffness matrix for the frame part were applied and the stresses were found out. In the solutions of the systems, when solving the shear-Jwall with finite element method, rectangular elements having two or three degrees of freedooms in the element nodes were chosen. The results which obtained from solved examples were compared with the results of the other solution methods given in the literature.
Benzer Tezler
- Depreme dayanıklı yapı tasarımında kayma ve eğilme rijitliklerinin yapı yüksekliğince değişmesi hali için birinci serbest titreşim periyodunun hesabına ilişkin bir yaklaşım
An approach to calculate the first mode vibration period for earthquake resistant structural design in case of changing shear and flexural rigidities along height
AYLİN VARAN
Yüksek Lisans
Türkçe
2018
İnşaat MühendisliğiDokuz Eylül Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. YILDIRIM ERTUTAR
- Sismik titreşimler altında betonarme perde ve çerçeve sistemlerin doğrusal olmayan stokastik analizi
Non-linear stochastic analysis of 3D reinforced-concrete shear wall-frame structures under seismic excitation
BEYZA TAŞKIN
- Boşluklu perdeler içeren çok katlı betonarme yapı sistemlerinin lineer olmayan davranışlarının incelenmesi ve süneklik düzeylerinin belirlenmesi
Non-linear behaviour and ductility level of multistory reinforced concrete structures composed of frames and shear walls with openings
M. ANDAÇ KARACAN
Yüksek Lisans
Türkçe
1999
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ERKAN ÖZER
- Betonarme taşıyıcı sistemlerin tasarımında maliyet optimizasyonu için çelik sistemlerin kullanılması
The usage of steel structural systems to optimize the total cost of reinforced concrete structural systems
VEYSEL KONUK
Yüksek Lisans
Türkçe
2019
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. FETHİ KADIOĞLU
- An adaptive modal pushover analysis procedure to evaluate the earthquake performance of high-rise buildings
Yüksek binaların deprem performansının değerlendirilmesi için bir uyarlamalı itme analizi yöntemi
MELİH SÜRMELİ
Doktora
İngilizce
2016
Deprem Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERCAN YÜKSEL