Geri Dön

Developing a ZigBee wireless network and controlling it through the internet

ZigBee kablosuz ağ protokolünü kullanan kablosuz bilgisayar ağı geliştirmek ve bu ağı internet üzerinden kontrol etmek

  1. Tez No: 237608
  2. Yazar: KEREM KAYNAR
  3. Danışmanlar: DR. ATTİLA ÖZGİT
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
  6. Anahtar Kelimeler: Kablosuz ağlar, Mikrodenetleyiciler, Yerel alan ağları, İnternet, Wireless networks, Microcontroller, Local area networks, Internet
  7. Yıl: 2009
  8. Dil: İngilizce
  9. Üniversite: Orta Doğu Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Bilgisayar Mühendisliği Bölümü
  12. Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu tezin amacı elemanları ZigBee kablosuz ağ protokolüyle haberleşen bir bilgisayar ağı geliştirmek ve bu ağı bir kişisel bilgisayar ile İnternet üzerinden kontrol etmektir. Bu kablosuz bilgisayar ağının bir elemanı ana eleman olarak tasarlanıyor. Diğer elemanlar ise yardımcı elemanlar oluyorlar. Ana ağ elemanı, Ethernet protokolünü kullanan ve İnternete bağlı olan bir bilgisayar ağına bağlanabilir. Bir kişisel bilgisayar bu ana ağ elemanı ile özel bir web uygulaması yoluyla Internet üzerinden haberleşebilir. Bu web uygulamasının yükleneceği web sunucusuyla ana ağ elemanı arasındaki iletişim bu tezde tanimlanan ve TCP/IP üzerinde çalışan özel bir uygulama protokolüyle gerçekleşir. Ana ağ elemanı yardımcı ağ elemanlarını bir kişisel bilgisayarın kullanıcısının İnternet üzerinden verdiği komutlara göre kontrol eder. Ana ağ elemanı yardımcı ağ elemanları ile haberleşebilmek için ZigBee protokol yığını ve uygun bir uygulama yazılımı içerir. Ana ağ elemanı özel web uygulamasının yükleneceği web sunucusuyla haberleşebilmek için TCP/IP yazılım yığını ve uygun bir uygulama yazılımı içerir. Yardımcı ağ elemanları ana ağ elemanı ile haberleşebilmek için ZigBee protokol yığını ve uygun bir uygulama yazılımı içerirler. Her bir ağ elemanı tipi için, o tip ağ elemanının içereceği yazılımla uyumlu olan donanım kullanılır. Her bir tip ağ elemanı mikrodenetleyici tabanlı donanım kullanır.

Özet (Çeviri)

The aim of this thesis is to develop a network, whose nodes communicate with the ZigBee wireless network protocol, and control this network with a PC through the Internet. One of the nodes of this network is designed to be master node. The other nodes are slave nodes. The master node can be connected to an Ethernet connected to the Internet. A PC can communicate with the master node via a specific web application over the Internet. The communication between a web server, in which the specific web application is loaded, and the master node is performed using a specific application protocol working over TCP/IP and defined in this thesis. The master node controls the slave nodes of the wireless network formed according to the commands given by the user of a PC over the Internet. The master node contains an implementation of the ZigBee stack along with a suitable application software to communicate with the slave nodes. The master node also contains an implementation of the TCP/IP stack along with a suitable application software to communicate with a web server in which the specific web application is loaded. The slave nodes contain an implementation of the ZigBee stack along with a suitable application software to communicate with the master node. For each type of node, appropriate hardware which is compliant with the software contained by that type of node is used. Each type of node uses microcontroller-based hardware.

Benzer Tezler

  1. Dokuma kumaşlarda örgü tipinin ham kumaşın boyutları ve geometrik özellikleri üzerindeki etkilerinin araştırılması

    Başlık çevirisi yok

    EMEL ÖNDER

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    Tekstil ve Tekstil MühendisliğiEge Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜNGÖR BAŞER

  2. Düz atkı örme kumaşlarda ilmek eğikliğinin iplik özellikleri ile ilişkisi üzerine bir araştırma

    Başlık çevirisi yok

    FATMA ÇEKEN

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    Tekstil ve Tekstil MühendisliğiEge Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜNGÖR BAŞER

  3. Çukurova bölgesinde biyoklimatik veriler kullanılarak açık ve yeşil alan sistemlerinin belirlenmesi ilkeleri üzerinde bir araştırma

    A research on the determination of the principles in open and green spaces systems by using the bioclimatic data in Çukurova region

    MEHMET FARUK ALTUNKASA

    Doktora

    Türkçe

    Türkçe

    1987

    Çevre MühendisliğiÇukurova Üniversitesi

    Peyzaj Mimarlığı Ana Bilim Dalı

    DOÇ. DR. ERDOĞAN GÜLTEKİN

  4. Ülkemizdeki çeşitli büyüklükteki yerleşim merkezlerinde uygulanabilecek kültür yapısı planlama modeli

    The Planning model of the cultural building which applicable at different size of settlement center

    MUSTAFA İNCESAKAL

    Yüksek Lisans

    Türkçe

    Türkçe

    1986

    Şehircilik ve Bölge PlanlamaGazi Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. UMUR ERKMEN

  5. Antakya tarihi ticaret merkezi mekansal yapı değişim ve gelişim sürecinin kent ticaret merkezi planlamasına etkinliği

    The Effectiveness of spatial structural chance and development period of the historical trade center of Antakya in the urban trade planning

    NEVİN TURGUT

    Yüksek Lisans

    Türkçe

    Türkçe

    1986

    Şehircilik ve Bölge PlanlamaGazi Üniversitesi

    Şehir ve Bölge Planlama Ana Bilim Dalı

    YRD. DOÇ. DR. NURCAN UYDAŞ