Seismic retrofitting of R/C frames with deficient lap splices
Yetersiz bindirme boyu bulunan betonarme çerçevelerin depreme karşı güçlendirilmesi
- Tez No: 252590
- Danışmanlar: YRD. DOÇ. DR. KUTAY ORAKÇAL
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2009
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 106
Özet
Günümüzde kullanılmakta olan mevcut betonarme çerçeve binalarının çoğu, boyuna donatısındaki yetersiz ankraj, kolonlarda yetersiz bindirme boyu, olası mafsallaşma bölgesinde etriye eksikliği, birleşim bölgesinde yetersiz kesme kuvveti dayanımı ve güçlü kolon zayıf kiriş durumunun olmaması gibi detaylandırma eksiklikleri sebebiyle, yeterli deprem dayanımına sahip olmayabilir. Bunun gibi eksik detaylandırılmış çerçevelerin sismik performansını arttırmak için, önemli sayıda araştırma yapılmıştır. Bu çalışmada alternatif bir güçlendirme metodu olarak dıştan CFRP uygulamasının, yetersiz bindirme boyuna sahip çerçeve üzerindeki etkisi incelenmiştir.Bu çalışma kapsamında, olumsuz etkileri ortadan kaldıracak yeni bir güçlendirme yöntemi önerilmesinin yanı sıra yetersiz bindirme boyunun çerçeve davranışı üzerindeki etkisini incelemek amacıyla, 2/3 ölçekli bir katlı bir açıklıklı betonarme çerçeveler üretilmiş ve yatay yükler altında test edilmiştir. Bir numune, sürekli boy donatısı kullanılarak ve en son sismik yönetmeliğin hükümlerine uygun olarak üretilmiş, diğer iki numune ise temelin hemen üzerinde, yetersiz bindirme boyu kullanılarak ve bu bölgede daha az etriye kullanılarak üretilmiştir. Yatay yük davranışlarını iyileştirmek amacı ile bindirme boyu olan numunelerin birinde, CFRP ve çelik ankrajların birlikte kullanılmasıyla orijinal bir güçlendirme tekniği geliştirilmiş ve uygulanmıştır. Bu teknikte, sargılama etkisinin arttırılması için yatay yönün yanı sıra, kolonların eğilme kapasitesini arttırmak amacı ile kolonların her iki tarafında, boyuna yönde de CFRP uygulaması yapılmıştır. Test sonuçları, güçlendirilen numunenin sünekliğinde olumsuz bir etki olmaksızın, yatay yük kapasitesinde önemli bir artış olduğunu göstermiştir.
Özet (Çeviri)
Many of the existing reinforced concrete frame buildings in use today may not have adequate seismic resistance due to detailing deficiencies including inadequate anchorage of longitudinal reinforcement, inadequate lap splices in the columns, lack of confinement in potential plastic hinge regions, inadequate joint shear strength, and absence of the strong column?weak beam condition. A significant amount of research has been devoted to the study of various strengthening techniques to enhance the seismic performance of such frame systems with detailing deficiencies. An alternative strengthening method consists of using externally applied carbon fiber reinforced polymers (CFRP), the effect of which has been investigated in this study on frames with inadequate lap splices.Within the scope of this work, 2/3-scale one-bay, one-story frames (portal frames) were constructed and tested under lateral loads for investigating the effect of inadequate lap splices on the frame response, as well as to propose a novel strengthening methodology to mitigate the negative effects. One specimen was constructed with continuous longitudinal reinforcement and according to detailing provisions specified by the latest seismic code, whereas two other specimens were constructed with inadequate lap splices on the column longitudinal reinforcement just above the footing, as well as insufficient transverse reinforcement in the lap splice regions. An original strengthening technique, using a combination of CFRP materials and steel anchorage rods, was developed and applied on one of the lap splice specimens for improving its lateral load behavior. In this technique, the CFRP sheets were installed both in the longitudinal direction of the columns for increasing their flexural capacity, as well as the in transverse direction to induce confinement effects. The test results showed a significant improvement in the lateral load capacity of the strengthened specimen, with no negative influence on its ductility.
Benzer Tezler
- Burkulması engellenmiş çelik çaprazlar ile güçlendirilmiş betonarme yapıların dinamik özelliklerinin yapısal tanımlama yöntemi ile belirlenmesi
The determination of dynamic properties of rc structures retrofitted with buckli̇ng restrained braces by using healt monitoring procedures
BURAK YAVAŞ
Yüksek Lisans
Türkçe
2017
İnşaat MühendisliğiAkdeniz Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. RAMAZAN ÖZÇELİK
- Seismic upgrading of reinforced concrete frames with structural steel elements
Betonarme çerçevelerin çelik yapı elemanları ile sismik güçlendirilmesi
RAMAZAN ÖZÇELİK
Doktora
İngilizce
2011
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Bölümü
DOÇ. DR. BARIŞ BİNİCİ
- Nonlinear analysis of rc frames retrofitted with structural steel elements
Yapısal çelik elemanlarla güçlendirilmiş betonarme yapıların doğrusal olmayan analizleri
UĞUR AKPINAR
Yüksek Lisans
İngilizce
2010
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Bölümü
YRD. DOÇ. DR. BARIŞ BİNİCİ
- Betonarme yapıların burkulması engellenmiş çelik çaprazlar ile dış güçlendirme metotlarının geliştirilmesi
The development of design methods for seismic retrofitting of reinforced concrete structures wi̇th buckling restrained braces
ELİF FİRUZE ERDİL
Doktora
Türkçe
2023
İnşaat MühendisliğiAkdeniz Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. RAMAZAN ÖZÇELİK
- Integrated seismic retrofit with steel bracing members in building facades
Binaların cephelerinde çelik çapraz elemanlarla depreme karşı bütünleşik güçlendirme
KIMIA JOZAGHİ
Yüksek Lisans
İngilizce
2019
Deprem Mühendisliğiİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. OĞUZ CEM ÇELİK