Geri Dön

Germanyumun gümüşün mikroyapı ve mekanik özelliklerine etkisi

Effect of germanium on the microstructural and mechanical properties of silver

  1. Tez No: 255001
  2. Yazar: NAZLI AKÇAMLI
  3. Danışmanlar: PROF. DR. ENVER OKTAY
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2009
  8. Dil: Türkçe
  9. Üniversite: İstanbul Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 87

Özet

Bu çalışmada; hassas döküm yöntemiyle gümüş ve Ag-%0.53 Ge, Ag-%1.19 Ge, Ag-%2.22 Ge içeren alaşımlar hazırlanarak döküm ve soğuk işlem uygulanmış hallerinin mikroyapı ve mekanik özellikleri incelenmiştir. Ayrıca sterling gümüş ve Ag-%6.06 Cu-%1.38 Ge alaşımları da hassas döküm yöntemi ile üretilerek mikroyapı, mekanik ve kararma özellikleri araştırılmıştır.Saf gümüşün ve Ag-%0.53 Ge, Ag-%1.19 Ge, Ag-%2.22 Ge alaşımlarının döküm hallerinin sertlikleri sırasıyla 25.3, 30.4, 33.5 ve 35.5 HV; çekme mukavemetleri 104.22, 85.90, 64.74 ve 51.01 MPa ve % uzama değerleri ise %27.89, %19.87, %13.43 ve %7.63 olarak bulunmuştur. Gümüşün ve Ag-%0.53 Ge, Ag-%2.22 Ge alaşımlarının döküm hallerinin yaklaşık %50 soğuk deformasyona uğratılmış durumda sertlikleri sırasıyla 107.7, 124.0 ve 146.6 HV; çekme mukavemetleri 170.81, 223.73 ve 320.21 MPa ve % uzama değerleri ise %2.97, %0.18 ve %0.36 olarak belirlenmiştir. %50 soğuk deformasyon uygulanan gümüş ve Ag-%0.53 Ge, Ag-%2.22 Ge alaşımları 300 ºC' de 30 dakika tavlandıklarında sertlikleri 37.6, 85.7 ve 108.4 HV; çekme mukavemetleri 142.02, 158.44 ve 230.83 MPa ve % uzama değerleri ise sırasıyla %29.08, %10.12 ve %3.77 olarak bulunmuştur. %50 deforme edildikten sonra tavlanmış alaşımların mikroyapılarında yeniden kristalleşme sonucu daha küçük tanelerin oluştuğu görülmüştür.Sterling gümüş alaşımının döküm halinin sertliği 71.5 HV, çekme mukavemeti 148.55 MPa ve % uzaması %16.99; Ag-%6.06Cu-%1.38Ge alaşımının ise döküm halinin sertliği 69.2 HV, çekme mukavemeti 191.26 MPa ve % uzaması da %13.96 olarak belirlenmiştir. Aşırı soğumadan dolayı sterling gümüşün mikroyapısında ötektik yapı oluşmuştur. Ag-%6.06Cu-%1.38 Ge alaşımının mikroyapısında ise Cu5Ge arabileşik fazı bulunmaktadır. Ag-%6.06Cu-%1.38Ge alaşımının kararma direnci standart sterling gümüş alaşımından daha yüksektir.

Özet (Çeviri)

Silver and Ag-0.53 wt. %Ge, Ag-1.19 wt. %Ge, Ag-2.22 wt. % Ge alloys were prepared with investment casting and their mechanical and microstructural properties were investigated in as cast and cold worked states. Also sterling silver and Ag-6.06% Cu-1.38% Ge alloys prepared by investment casting and their microstructural, mechanical and tarnishing properties were investigated.In as cast state the hardness values of silver and Ag-0.53 wt. % Ge, Ag-1.19 wt. % Ge, Ag-2.22 wt. % Ge alloys were 25.3, 30.4, 33.5 and 35.5 HV, the tensile strengths were 104.22, 85.90, 64.74 and 51.01 MPa and elongations were 27.89 %, 19.87 %, 13.43 % and 7.63 %, respectively. The silver and Ag-0.53 wt. % Ge, Ag-2.22 wt. % Ge alloys were cold worked by approximately 50%. In cold worked state hardness values were 07.7, 124.0 and 146.6 HV, the tensile strengths were 170.81, 223.73 and 320.21 MPa and the elongations were 2.97%, 0.18% and 0.36%, respectively.The hardness, tensile strength and elongation of sterling silver in as cast state were determined as 71.5 HV, 148.55 MPa, and 16.99%, respectively. Also Ag-6.06 wt. %Cu-1.38 wt. %Ge alloy?s hardness , tensile strength and elongation in as cast state were 69.2 HV, 191.26 MPa and 13.96 %, respectively. Because of under cooling, eutectic structure was existed in sterling silver?s microstructure and intermetallic Cu5Ge phase was founded in the Ag-6.06 wt. %Cu-1.38 wt. %Ge alloy?s microstructure. The tarnish resistance of Ag-6.06Cu%-1.38Ge% alloys was higher than the tarnish resistance of sterling silver.

Benzer Tezler

  1. Preconcentation of germanium by surfactant (Cloud point extraction) and determination by HGAAS

    Germanyumun deterjanla önzenginleştirilmesi (Bulutlanma noktası ile ayırım) ve HGAAS ile tayini

    AYŞE ELİF BÜYÜKBAYRAM

    Yüksek Lisans

    İngilizce

    İngilizce

    1999

    KimyaOrta Doğu Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. MÜRVET VOLKAN

  2. Preconcentration of germanium with mercapto resin and determination by HGAAS

    Germanyumun Merkapto reçine ile önzenginleştirilmesi ve HOAAS ile tayini

    GAMZE GÖKTÜRK

    Yüksek Lisans

    İngilizce

    İngilizce

    1999

    KimyaOrta Doğu Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. MÜRVET VOLKAN

  3. Membran filtre üzerinde germanyumun zenginleştirmesi

    Preconcentration of germanium on membrane filters

    SEVTAP YİĞİT

    Yüksek Lisans

    Türkçe

    Türkçe

    2013

    KimyaErciyes Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. MUSTAFA SOYLAK

  4. Germanyum adsorptif sıyırma voltametri yöntemiyle tayini

    Determination of germanium by using adsorptive stripping voltammetry method

    GÜLER ARIKAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    KimyaGazi Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. HASAN AYDIN

  5. Germanyumun eser miktarının tayini için adsorbtif sıyırma voltametrisiyle yöntem geliştirilmesi

    A New adsorbtive stripping voltametric method for the trace analysis of germanium

    FARUK GÖKMEŞE

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. ALİ OSMAN SOLAK