Geri Dön

Plastik enjeksiyon işleminin üç boyutlu sayısal modellenmesi

A three dimensional numerical modelling of injection molding

  1. Tez No: 258988
  2. Yazar: ALİ KARAKUŞ
  3. Danışmanlar: DOÇ. DR. MUSTAFA TUTAR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2009
  8. Dil: Türkçe
  9. Üniversite: Mersin Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 98

Özet

Bu çalışmada, paralel hesaplama teknolojisi kullanılarak, üç boyutlu (3-B) insert enjeksiyon işleminde, sıkıştırılma ve hal değişimi şartlarını göz önünde bulunduran nümerik bir yaklaşım sunulmuştur. Akışkan elemanı hacim yöntemi (VOF) sonlu hacimler yöntemiyle birlikte polimer enjeksiyon prosesinin dolma aşamasının simülasyonunda kullanılmıştır. Hareketli ara yüzü yakalamak için CICSAM algoritması ve basınç ve hız arasındaki yüksek seviyeli ilişkiye dayalı PISO basınç-hız bağlantı algoritması başarıyla uygulanmıştır. Gerçek kalıp dolma koşulları için önerilen nümerik metodolojinin yeterliliği yapılan deneysel sonuçlarla ve başka programlardan elde edilen sonuçlarla kıyaslanarak doğrulanmıştır. Nümerik sonuçlar, sunulan nümerik modelleme yaklaşımının insert metalli plastik enjeksiyon işleminin optimizasyonuna yönelik çalışmalarda güvenle kullanılabileceğini ileri sürmektedir.

Özet (Çeviri)

In the present study a more complete numerical solution approach using parallel computing technology is provided for the three-dimensional (3-D) modeling of mold insert polymer injection molding process by considering the effects of phase-change and compressibility for non-Newtonian fluid flow conditions. A volume of fluid (VOF) method coupled with a finite volume approach is used to simulate the mold filling stage of the injection molding process. A comprehensive high-resolution differencing scheme (CICSAM) is successfully utilized to capture moving interfaces and the Pressure Implicit with Splitting Operators (PISO) pressure-velocity coupling algorithm is employed to enable higher degree of approximate relation between corrections for pressure and velocity. The capabilities of the proposed numerical methodology in modeling real molding flow conditions are verified through quantitative and qualitative comparisons with other simulation programs and the data obtained from the conducted experimental study. The numerical results suggest that the present numerical solution approach can be used with a confidence for further studies of optimization of design of mold insert polymer injection molding processes.

Benzer Tezler

  1. Optimization of plastic injection process parameters using the Taguchi method, machine learning and genetic algorithm

    Plastik enjeksiyon prosesinde Taguchi, makine öğrenmesi ve genetik algoritma yöntemlerini kullanarak parametre optimizasyonu

    BURAK SEL

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ERSAN ÜSTÜNDAĞ

  2. Plastiklerin gaz enjeksiyon metodu ile üretiminde işlem parametrelerinin tasarım ve imalata etkisinin incelenmesi

    Effect of process variables on design and manufacturing of plastic's production with gas assisted injection molding

    HALİL ANAPA

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. VEDAT TEMİZ

  3. Motor soğutma sistemleri için ekstrüzyon yöntemiyle polifenilen sülfit (PPS) boru üretimi ve üretim parametrelerinin optimizasyonu

    Production of polyphenylene sulfide (PPS) pipes by extrusion for engine cooling systems and optimization of process parameters

    MUSTAFA SEVDAROĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. BURAK ÖZKAL

  4. Aşil tendonu z plasti işleminde iki farklı yöntemin biyomekanik ve histopatolojik karşılaştırılması

    Compari̇son of two di̇fferent techni̇ques bi̇omechani̇cally and hi̇stopatologi̇cally i̇n z plasty of achi̇lles tendon

    DENİZ AKBULUT

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2018

    Ortopedi ve TravmatolojiSağlık Bilimleri Üniversitesi

    Ortopedi ve Travmatoloji Ana Bilim Dalı

    UZMAN EVREN AKPINAR

  5. İnce sert seramik kaplamaların kazımalı aşınma davranışları ile endüstriyel zımbalama işlemine uygulanması

    Fretting wear behavior of thin hard ceramic coatings with an application of industrial punching operation

    ALEV OSMA

    Doktora

    Türkçe

    Türkçe

    1999

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. E. SABRİ KAYALI