Geri Dön

Yapısal olmayan endüstriyel ahşap iç ekipmanların deprem davranışının incelenmesi

Investigation of earthquake behavior of non-structural wood interior equipment

  1. Tez No: 268706
  2. Yazar: HASAN HÜSEYİN TAŞ
  3. Danışmanlar: DOÇ. DR. MESUT ÇİMEN, PROF. DR. MUSTAFA ALTINOK
  4. Tez Türü: Doktora
  5. Konular: Deprem Mühendisliği, İnşaat Mühendisliği, Earthquake Engineering, Civil Engineering
  6. Anahtar Kelimeler: Mobilya devrilmesi, depreme hazırlıklı olma, deprem önlemleri, deprem etkileri, mobilya mukavemeti, Furniture overturning, earthquake preparedness, earthquake effects, earthquake measures, furniture strength
  7. Yıl: 2010
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 153

Özet

Bu çalışma, endüstriyel ahşap iç ekipmanlardan T.S 5913'e uygun bir kitaplık dolabının, hafif hasarlı bir depremde maksimum ivme altıdaki davranışlarının analiz edilmesi için yapılmıştır. Bu amaçla, levha türü (YL-Lam, MDF-Lam, MP), birleşme tipi( Karma, Kavelalı, Vida ) ve tutkal çeşidine göre ( PVA, Polimarin, Silikon) değişen kitap dolabı için, ilk olarak deprem yatay kuvvetlerinin etkisiyle derinlik ve genişlik yönünde devrilme eğiliminde olup olmadığı, teorik olarak incelenmiştir. İkinci adımda deprem etkisi ile dolap birleşim yerlerinde oluşan moment ve kesme kuvvetlerinin, dolap mukavemetini nasıl etkilediği teorik olarak analiz edilmiştir. Üçüncü adımda, dolap köşe birleştirmelerini temsil eden arkalıklı ve arkalıksız örnekler üzerinde deneyler yapılarak, ortalama diyagonal çekme ve basınç kuvvetlerinden hesaplanan moment ve kesme kuvvet değerleri, deprem teorik moment ve kesme kuvvetleri ile karşılaştırılarak arkalık elemanının dolap kararlılığı ve mukavemeti üzerindeki etkileri araştırılmıştır. Son olarak arkalıksız köşe birleşimli deney örneklerinin maksimum yük taşıma kapasiteleri istatiksel olarak incelenerek, en iyi ve en zayıf dolap mukavemetini oluşturan malzeme ve konstrüksiyon özellikleri belirlenmiştir.

Özet (Çeviri)

The aim of the present study is to analyze the behaviours of a bookshelf complying with T.S 5913, which is among the industrial wooden internal equipments, in case of an earthquake with low damage under maximum acceleration. To this end, first, it was theoretically examined whether it tends to tilt over in the direction of deepness and wideness with the effect of horizontal earthquake forces depending on the type of the plate material (YL-Lam, MDF-Lam, MP), type of joint (Mixed, dowel, screw) and the type of the glue used (PVA, polymarine, silicon). In the second step, the effect of the moment and shear forces arising in the cupboard joint points with the effect of an earthquake on the resistance of the cupboard was theoretically analyzed. In the third step, experiments were conducted on the samples with or without a back which represent cupboard edge joints, and the moment and shear force values calculated from the average diagonal tensile and pressure forces were compared to the earthquake theoretical moment and shear forces. Then, the effect of the element of a back on the stability and resistance of the cupboard was researched. Lastly, the maximum load bearing capacities of the experiment samples with edge joints without a back were statistically examined, and the material and construction features which provide the best and the poorest cupboard resistance were determined.

Benzer Tezler

  1. Ahşap birleşimleri ve yapı kabuğu tasarımında nem etkisinin incelenmesi

    Investigation of moisture effects on timber connections and enclosure design of building

    MEHMET KARA

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    MimarlıkYıldız Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. ZEHRA CANAN GİRGİN

  2. High performance polymeric materials for architectural membrane application

    Mimari membran uygulaması için yüksek performanslı polymerik malzemeler

    FARRİN GHORBANALAVİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2014

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. NİHAL ARIOĞLU

  3. Innovative computational techniques for accurate internal defect detection in trees: A stress wave tomography approach enhanced by machine learning

    Ağaçlarda iç kusurların doğru tespiti için yenilikçi hesaplamalı teknikler: Makine öğrenimi ile geliştirilmiş bir stres dalgası tomografi yaklaşımı

    ECEM NUR YILDIZCAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Matematik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. BURCU TUNGA

  4. Cam elyaf takviyeli tabakalı ahşap kompozit malzeme geliştirilmesi

    Development of glass fiber reinforced laminated wood composite material

    EMİN ERSOY

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine MühendisliğiErciyes Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET BAKİ KARAMIŞ

  5. İstanbul konut mimarlığında ahşap-kâgir yapım sistemlerinin seçiminde belirleyici etkenler (1800-1930)

    The factors determining the selection of wood-masonry construction systems in İstanbul houses (1800-1930)

    YEŞİM ERDAL

    Doktora

    Türkçe

    Türkçe

    2023

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. DENİZ MAZLUM