Geri Dön

Puzolanik malzemelerin hafif duvar malzemesi üretiminde kullanımı

Utilization of pozzolanic materials in lightweight wall material production

  1. Tez No: 275775
  2. Yazar: ERSİN KİRAZ
  3. Danışmanlar: YRD. DOÇ. DR. SALİH TANER YILDIRIM
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2010
  8. Dil: Türkçe
  9. Üniversite: Kocaeli Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 91

Özet

Bu deneysel çalışmada endüstriyel bir atık olan siklon külü ve uçucu kül ile hafif duvar malzemesi üretimi araştırılmıştır. Yalıtıma ve hafifliğe yardımcı olması için genleştirilmiş perlit kullanılmıştır. Çalışmanın ilk iki aşaması harç numuneleri üzerinden yürütülmüş ve toplam üç aşamada gerçekleştirilmiştir. İlk aşamada literatürde yapılan çalışmalar ışığında, ağırlıkça en uygun bağlayıcı (çimento-kireç-uçucu kül) oranları belirlenmiş ve numuneler üç farklı kür koşulunda test edilmiştir. İkinci aşamada seçilen bağlayıcı oranları ile hacimce siklon-perlit oranları araştırılmıştır. Son aşamada ise duvar elemanı boyutunda numuneler üretilmiştir. Basınç ve eğilme dayanımı, su emme, birim ağırlık ve ısı yalıtımı düzeyini belirlemek için birçok test yapılmıştır.Sonuç olarak, amaçlandığı gibi puzolanik malzemeler ile hafif duvar malzemesi üretiminde başarıya ulaşılmıştır. Üretilen malzemenin yapısı çok boşluklu ve hafif, su emme, mukavemet ve ısı yalıtım değerleri yeterli olmuştur.

Özet (Çeviri)

In this experimental study, fly ash and cenosphere which is an industrial waste was investigated in lightweight wall material production. Expanded perlite was used to help insulation and lightness. The first two phases of the study was conducted on the mortar samples and all of the study was conducted in three phases. In the first stage, the most suitable binder (cement-lime-fly ash) ratios by weight were determinated in light of the studies in the literature and the specimens were tested in three different curing conditions. In the second stage, selected binding rates and cenosphere-perlite ratio by volume were investigated. In the final stage, the samples were produced in the size of wall element determinated in the study. A lot of tests were carried out to determine compressive and flexural strength, water absorption, unit weight and heat insulation level.Eventually, it was reached to achievement as intended in lightweight wall material production with puzzolanic materials. The structure of the material produced is much porous and light and the values of water absorption, strength and heat insulation have been sufficient.

Benzer Tezler

  1. Doğal puzolan esaslı hafif jeopolimer duvar malzemesi

    Natural pozzolan based lightweight geopolymer wall material

    KÜBRA EKİZ BARIŞ

    Doktora

    Türkçe

    Türkçe

    2022

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. LEYLA TANAÇAN

  2. Endüstriyel atıkların hafif beton özelliklerine etkilerinin bulanık mantık yöntemiyle modellenmesi

    Modelling the effects of industrial wastes on properties of lightweight concrete by fuzzy logic method

    AHMET BEYCİOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    İnşaat MühendisliğiSüleyman Demirel Üniversitesi

    Yapı Eğitimi Ana Bilim Dalı

    DOÇ. DR. CELALETTİN BAŞYİĞİT

  3. Sürdürülebilir altyapılar için yeni nesil akıllı çimento bağlayıcılı kompozit malzemelerin geliştirilmesi

    Development of new generation smart cementitious composites for sustainable infrastructures

    GÜRKAN YILDIRIM

    Doktora

    Türkçe

    Türkçe

    2016

    İnşaat MühendisliğiGazi Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MUSTAFA ŞAHMARAN

  4. Mermer tozları ve uçucu kül ile polimer esaslı kompozit malzeme üretimi

    Manufacturing of polymer matrix composite metarial composite material using marble dust and fly ash

    EMİN AKIN

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    Polimer Bilim ve TeknolojisiGazi Üniversitesi

    İleri Teknolojiler Ana Bilim Dalı

    PROF. DR. METİN GÜRÜ

  5. Karma llif içeren çimento esaslı kompozitlerin mekanik davranışı - bir optimum tasarım

    Mechanical behavior of cement based composites reinforced with hybrid fibres - an optimum design

    ÖZGÜR EKİNCİOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    Yapı Malzemesi Ana Bilim Dalı

    DOÇ. DR. CANAN TAŞDEMİR