Coating of metal surface by welding
Başlık çevirisi mevcut değil.
- Tez No: 29102
- Danışmanlar: PROF. DR. KAZIM ÖNEL
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1993
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 96
Özet
Özet yok.
Özet (Çeviri)
- vii - ABSTRACT Often the prime requirement of a metal part is that it has exceptionally good resistance to wear, corrision, or high temperatures. Rather than make the entire part from some expensive wear-resistant, corrision- resistant or temperature-resistant alloy, it is more economical to make if from an ordinary weldable metal coated with desirede surface layer capable of withstanding the service conditions. The application of a durable surface layer to a metal is called hardsurfacing, and a simple way to apply hardsurfacing to materials is arc-welding. There are various materials that can be used for hardsurfacing, and selecting the one best suited to a particular application involves balancing cost against performance, as in the selection of any engineering material. Although some materials are hardsurfaced to improve their resistance to corrision or high temperatures, by far the most common reason for hardsurfacing is to improve wear resistance. Although it is virtually impossible to prevent the deterioration of metal parts which occurs with use, it can be minimuzed effectively by hardfacing. This is probably the most important wear consideration in design. In this work a given carbon steel is faced using different electrodes of different compositions and hardness, impact strength, and microstructures of different specimens are investigated.
Benzer Tezler
- Mühendislik malzemelerinin sert lehimlenebilme karakteristikleri
Başlık çevirisi yok
MEHMET BÜLENT ÖZTURAN
Yüksek Lisans
Türkçe
1997
Makine Mühendisliğiİstanbul Teknik ÜniversitesiKaynak Mühendisliği Ana Bilim Dalı
PROF. DR. SELMA AKKURT
- Seramik birleştirme teknolojisi ve yapısal seramiklerin lehimlenmesi
Ceramic foining technology and brazing of structural ceramics
OSMAN AKKOCA
- Titanyum kaynağı ve mekanik özellikler üzerine etkisinin incelenmesi
Titanium welding and investigation of effect on mechanical properties
MURAT SÖNMEZ
Yüksek Lisans
Türkçe
2019
Mühendislik Bilimleriİstanbul Gedik ÜniversitesiSavunma Teknolojileri Ana Bilim Dalı
DR. ÖĞR. ÜYESİ POLAT TOPUZ
- Elektrospark biriktirme yöntemi ile çelik yüzeyler üzerinde Ni/B4C bazlı sert kaplamalar oluşturmak
Ni/B4C based hard coating on steel surface by using electrospark deposition method
MEHMET AKİF YILDIRIM
Yüksek Lisans
Türkçe
2021
Mühendislik BilimleriGebze Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. KEMAL KORKMAZ