Geri Dön

Mekano-termal yöntem ile karbon nanotüp üretimi ve karakterizasyonu

Production and characterization of carbon nanotube by mechano-thermal method

  1. Tez No: 292741
  2. Yazar: ÖMER GÜLER
  3. Danışmanlar: DOÇ. DR. ERTAN EVİN
  4. Tez Türü: Doktora
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Karbon Nanotüp, Yüksek Enerjili Öğütme, Mekano-Termal Yöntem, Grafitin Amorflaşması, Carbon Nanotube, High Energy Milling, Mechano-Thermal Method, Amorphization of Graphite
  7. Yıl: 2011
  8. Dil: Türkçe
  9. Üniversite: Fırat Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 158

Özet

Bu çalışmada, mekano-termal yöntem kullanılarak karbon nanotüp üretimi iki adımda gerçekleştirilmiştir. İlk adım, grafit tozlarının öğütülmesi işlemidir. Öğütme işlemi sayesinde grafit tozları ikinci adımda nanotüplere dönüşmektedirler. Öğütme işlemini iki farklı değirmen kullanılarak gerçekleştirilmiştir. Kullanılan değirmenlerin devri veya genliği, toza uyguladıkları gerilme türü, öğütme süresi gibi öğütme parametreleri değiştirilerek nanotüp oluşumunda öğütmenin etkisi tespit edilmiştir. Öğütülen tozlar XRD incelemelerine tabi tutulmuş, böylece öğütme süresince grafitte meydana gelen amorflaşma miktarı ve diğer değişimler tespit edilmiştir. Bu çalışmadaki ikinci adım ise, öğütülmüş tozların yüksek sıcaklıklarda tavlanması işlemidir. Bu amaçla, öğütülen tozlar 1200 oC ve 1600 oC arasındaki farklı sıcaklıklarda tavlama işlemine tabi tutulmuşlardır ve böylece nanotüpe dönüşüm sağlanmıştır. Tavlama sonucu elde edilen numuneler üzerinde SEM, FE-SEM ve HR-TEM incelemeleri yapılmıştır. SEM, FE-SEM ve HR-TEM sonuçları ile yapıda nanotüp oluşup oluşmadığı ve nanotüplerin çapları, boyları tespit edilmiştir. Elde edilen sonuçlar mekano-termal yöntem ile karbon nanotüplerin üretilebildiğini kanıtlamıştır.

Özet (Çeviri)

In the present study, the production of the carbon nanotube was performed in two steps by mechano-thermal method. The first step was the milling process of graphite powders. In the second step, the graphite powders were transformed to the carbon nanotube. Milling process was performed by using two different mills. The milled powders were analyzed using X-ray difraction and thus, the quantity of amorphization which is formed in graphite during milling and other changes were determined. The second step used in this study was anneling process at higher temperatures. With this aim, the milled powders were annealed at temperature varying from 1200 oC to 1600 oC. Thus, the transformation to nanotube was achieved. After the annealing process, the obtained samples were analyzed by SEM, FE-SEM and HR-TEM techniques. With results of SEM, FE-SEM and HR-TEM, it was determined whether the carbon nanotube was formed or not. Also, the lenght and diameter of carbon nanotubes were determined. The obtained results confirm that the production of the carbon nanotube can be performed by mechano-thermal method.

Benzer Tezler

  1. Mechanics of nanomaterials consisted of random networks

    Rastgele ağ yapılı nano malzemelerin mekaniği

    MESUT KIRCA

    Doktora

    İngilizce

    İngilizce

    2013

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ATA MUGAN

    YRD. DOÇ. DR. ALBERT C. TO

  2. Synthesis and characterization of various tungsten carbide powders from tungsten hexachloride powders via mechanochemical reaction and autoclave/pressure vessel methods

    Mekanokimyasal reaksiyon ve otoklav/basınçlı kap metodlarıyla tungsten hekzaklorür tozundan çeşitli tungsten karbür tozlarının sentezi ve karakterizasyonu

    NİHAN ÖZKAN AYTEKİN

    Doktora

    İngilizce

    İngilizce

    2020

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA LUTFİ ÖVEÇOĞLU

  3. Hidrojen redüksiyon yöntemi ile LaFeSi temelli manyetokalorik malzeme üretimi

    LaFeSi based magnetocaloric material production by hydrogen reduction method

    SEMİH ATEŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. SEBAHATTİN GÜRMEN

  4. Electromechanical sensing properties of flexible electronics from functional polymer nanocomposites

    Fonksiyonel polimer kompozitlerden üretilen esnek elektroniklerin elektromekanik algılama özellikleri

    MUKADDES ŞEVVAL ÇETİN

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Polimer Bilim ve TeknolojisiYalova Üniversitesi

    Polimer Malzeme Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ HATİCE AYLİN KARAHAN TOPRAKÇI

  5. The energy performance evaluation of Etfe (Ethylene tetrafluoroethylene) cusion systems integrated on the south façade of a hypothetical test room and comparison of it with glass façade systems

    Hipotetik ve güneye bakan bir test odasının, Etfe (Ethylene tetrafluoroethylene) sistemleri ile cam dış cephe sistemlerinin karşılaştırılıp, enerji performanslarının değerlendirilmesi

    SELİM KARAMAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    EnerjiYaşar Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. BAŞAK KUNDAKCI KOYUNBABA