Color engineering of π-conjugated donor-acceptor systems: The role of donor and acceptor units on the neutral state color
π-konjüge donör-akseptör sistemlerde renk ayarlanması: Nötral haldeki renk üzerine donör ve akseptör grupların etkisi
- Tez No: 305101
- Danışmanlar: PROF. DR. AHMET M. ÖNAL, DOÇ. DR. ATİLLA CİHANER
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Poliakrilat, Polyacrylate
- Yıl: 2011
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Polimerin özelliklerini ayarlayabilmek için öncelikle monomerin yapısının tasarlanması önemlidir. Bu çalışmada temel amaç, birçok farklı renkte, çözünürlük özelliğine sahip ve elektrokromik cihaz uygulamalarında kullanılabilecek polimerler sentezlemektir. Monomer yapıları tasarlanırken, polimerlerin özelliklerini etkileyecek faktörler de göz önünde bulundurulmuştur. Bu amaçla, monomerlerin herbir birimi istenenen herbir özellik için özenle seçilmiş ve herbir birimin etkisi ayrı ayrı incelenmiştir. Bu nedenle, bu çalışma üç ana bölümden oluşmaktadır: Donör gruplarının, akseptor gruplarının ve alkil zincirlerinin polimerin özellikleri üzerine etkisi. Tüm bu hedeflerin ışığında, tiyofen, 3,4-etilendioksitiyofen (EDOT), 3,3-didialkil-3,4-dihidro-2H-tiyeno[3,4-b]-[1,4]dioksefin (ProDOT-Cn) gruplarını D birimi olarak; 2,1,3-benzoselenadiazol, 2,1,3-benzothiadiazol, 2-decyl-2H-benzo[d][1,2,3]triazol ve 2,1,3-oksadiazol gruplarını A birim olarak içeren, dokuz adet D-A-D tipi monomer, TSeT, ESeE, PSeP-C10, PSP-C10, PNP-C10, POP-C10, PSeP-C4, PSP-C4 ve PSP-C6, ve bunların polimerleri, P(TSeT), P(ESeE), P(PSeP-C10), P(PSP-C10), P(PNP-C10), P(POP-C10), P(PSeP-C4), P(PSP-C4) ve P(PSP-C6), sentezlenmiştir. Elde edilen polimerlerin 1.13 eV ile 1.80 eV arasında değişen, oldukça düşük bant aralıklarına sahip oldukları ve elektrokromik özellikleri olduğu görüldü. Bu polimerler arasında P(POP-C10), P(PSP-C10) ve P(PSP-C6)'nın CMY (Cyan-Cam Göbeği, Magenta-Mor, Yellow-Sarı) renk sisteminin bir elemanı olan cam göbeği rengine sahip oldukları görüldü. Literatürde cam göbeği renkli polimerlerin saysısının az olması sebebiyle, bu polimerler oldukça değerlidir. PNP-C10 ve PSeP-C10'un kopolimerizasyonu ile ilk defa elektrokimyasal yöntemle sentezlenen nötral halinde siyah renkli polimer elde edilmiştir.
Özet (Çeviri)
Design of a monomer is a viable route for adjusting the properties of its corresponding polymer. The main goal of this study is to design and synthesize novel soluble polymers having various colors of color palette and amenable for use in electrochromic device applications. In designing the monomers, the factors affecting the properties of the polymers are also considered. For this purpose, each part of the monomers is chosen properly for each desirable properties and the effect of them is investigated separetely. Thus, this study is based on the investigation of the effect of three major parts on the polymer properties: Donor groups, acceptor groups and the length of alkyl chain. For this aim, nine D-A-D type monomers, TSeT, ESeE, PSeP-C10, PSP-C10, PNP-C10, POP-C10, PSeP-C4, PSP-C4 and PSP-C6, and their corresponding polymers, P(TSeT), P(ESeE), P(PSeP-C10), P(PSP-C10), P(PNP-C10), P(POP-C10), P(PSeP-C4), P(PSP-C4) and P(PSP-C6), based on thiophene, 3,4-ethylenedioxythiophene (EDOT), and 3,3-dialkyl-3,4-dihydro-2H-thieno[3,4-b]-[1,4]dioxepine (ProDOT-Cn) as D units and 2,1,3-benzoselenadiazole, 2,1,3-benzothiadiazole, 2-decyl-2H-benzo[d][1,2,3]triazole, and 2,1,3-benzooxadiazole as A units were synthesized. The obtained polymers have somewhat low band gap between 1.13 eV and 1.80 eV, they show electrochromic behaviors. Among them P(POP-C10), P(PSP-C10) and P(PSP-C6) have cyan color which is one leg of CMY (Cyan-Magenta-Yellow) color spaces. Since there have been scant studies on cyan colored polymers in the literature, these polymers are so precious. Via copolymerization of PNP-C10 and PSeP-C10, the first electrochemically synthesized neutral state black polymer was obtained.
Benzer Tezler
- Ditiyeno[3,2-b;3′,2′-d]tiyofen (DTT)–bor içeren donör akseptör sistemlerin sentezleri ve özellikleri
Synthesis and properties of donor–acceptor systems possessing dithieno[3,2-b;3′,2′-d]thiophen (DTT)–boron
EMİNE BİLLUR SEVİNİŞ
- Atmosferik basınç plazma jet ile bazı formazan moleküllerinin yapısının belirlenmesi
Investigation of some formazan molecules structure with atmospheric pressure plasma jet
ROBERT BÜLENT WİNTER
Yüksek Lisans
Türkçe
2021
Fizik ve Fizik MühendisliğiEskişehir Osmangazi ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. EROL TAŞAL
- Analaysis of J/Ψ → ω π0 π0 at BESIII
BESIII'te J/Ψ → ω π0 π0 analizi
ALPEREN YÜNCÜ
Yüksek Lisans
İngilizce
2015
Fizik ve Fizik MühendisliğiBoğaziçi ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. VEYSİ ERKCAN ÖZCAN
DOÇ. DR. İSMAİL RUHİ UMAN
- Kinetics of color changes due to maillard reaction in model food systems
Model gıda sistemlerinde maillard reaksiyonundan dolayı oluşan renk değişiminin kinetiği
HÜSEYİN BOZKURT
Yüksek Lisans
İngilizce
1996
Gıda MühendisliğiGaziantep ÜniversitesiGıda Mühendisliği Bölümü
DOÇ. DR. SAMİ EREN
- Biological color treatment of pulp and paper industry effluents
Kağıt ve selüloz endüstrisi atıksularında biyolojik metodla renk arıtımı
HATİCE BİLGİÇ
Yüksek Lisans
İngilizce
1997
Çevre MühendisliğiOrta Doğu Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. CELAL F. GÖKÇAY