Geri Dön

Manyetotellürik yöntemide sonlu farklar metodu ile iki boyutlu modelleme

Two dimensional modeling in magnetotelluric method by finite difference method

  1. Tez No: 310542
  2. Yazar: BERK YAKAR
  3. Danışmanlar: PROF. DR. H. İLYAS ÇAĞLAR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Jeofizik Mühendisliği, Geophysics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2012
  8. Dil: Türkçe
  9. Üniversite: İstanbul Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Jeofizik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 76

Özet

Jeofizikte doğal kaynaklı elektromanyetik yöntemlerden biride Manyetotellürik yöntemdir. Yer içinde bulunan doğal akımları kullanarak yer kabuğu ve üst mantonun elektriksel yapısı hakkında bilgi edinilebilir. Geniş bir frekans (10^-3 ? 10^4 Hz) aralığında çalışan Manyetotellürik yöntem, yüksek frekanslar ile sığ kesimleri, alçak frekanslar ile derin kesimleri inceleyerek farklı araştırma alanlarında çalışmayı mümkün kılar. Manyetotellürik yöntemde iki ayrı mod tanımlanır. İlki elektrik alanının jeolojik doğrultuya paralel olduğu TE (Trasverse Electric) modu, diğeri ise manyetik alanın jeolojik doğrultuya paralel olduğu TM (Transverse Magnetic) modu. Her iki mod doğaları gereği yeraltındaki farklı elektriksel yapıları diğerine göre daha iyi çözümler. TE modu yeraltındaki iletken yapıların bulunmasında hassasiyet gösterirken TM modu ise dirençli yapılara karşı daha hassastır. Bu iki modun temel farklılıkları incelenen alanlardan farklı sonuçlar elde edilmesini sağlar. Bu fark bu çalışma kapsamında incelenmiştir. Bu tez kapsamında MT yönteminde sonlu farklar tekniği kullanılarak iki boyutlu düz çözüm yapan bir algoritma MATLAB programlama dili kulanılarak geliştirilmiştir. Geliştirilen algoritma analitik çözüm ile karşılaştırılarak test edilmiştir. Daha sonar algoritma farklı iki boyutlu özdirenç modelleri ile denenmiştir. Bu denemelerde TE ve TM modu görünür özdirenç ve faz eğrilerinin davranışı incelenmiştir.

Özet (Çeviri)

Magnetotellurics is one of the electromagnetic methods in geophysics that uses natural electromagnetic fields. By using the naturally occurring current inside the earth, information about crust and upper mantle can be investigated. Due to using a wide frequency band (10^-3 ? 10^4 Hz), investigation of shallow zones with high frequencies and deep zones with low frequencies for different research area are made possible. There are two modes defined in Magnetotelluric method. First one is the TE mode where electrical field is perpendicular to the geological direction; the other one is the TM mode where magnetic field is perpendicular to the geological direction. Both of the modes resolves different electrical structures better than each other cause of their nature. While TE mode sensitive for finding conductive underground structures, on the other hand TM mode is better at finding resistant structures. This basic difference of these two modes enables to gather different information from study areas. This difference is investigated during the course of this study. The scope of this thesis is two dimensional forward modeling algorithm has been developed with MATLAB programming language using finite difference method. The developed algorithm was tested by comparing with the analytical solution. Afterwards algorithm was tested with different two dimensional resistivity models. In these tests the behavior of the apparent resistiviy and phase curves investigated for TE and TM modes.

Benzer Tezler

  1. Sismoloji ve manyetotellürik verilerin birleşik ters çözümü

    Joint inversion of seismology and magnetotelluric data

    İSMAİL DEMİRCİ

    Doktora

    Türkçe

    Türkçe

    2015

    Jeofizik MühendisliğiAnkara Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ÜNAL DİKMEN

  2. Sonlu farklar ve sonlu elemanlar melez düz çözümü ile MT verilerinin hızlı 3B ters çözümü

    Fast three dimensional inversion of Magnetotelluric data based on finite difference and finite element hybrid forward modeling

    DENİZ VARILSÜHA

    Doktora

    Türkçe

    Türkçe

    2019

    Jeofizik MühendisliğiAnkara Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET EMİN CANDANSAYAR

  3. Sonlu farklarda üçgen gridler kullanarak doğru akım özdirenç ve manyetotellürik iki-boyutlu ters çözüme topoğrafya etkisinin eklenmesi

    Incorporation of topography into two-dimensional direct current resistivity and magnetotelluric inversion by using finite difference method with triangular cells

    İSMAİL DEMİRCİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Jeofizik MühendisliğiAnkara Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. M. EMİN CANDANSAYAR

  4. Sönümlü en küçük kareler ve eşlenik türev algoritmalarının ardışık kullanımı ile manyetotellürik verilerin düzgünleştiricili iki-boyutlu ters çözümü

    Regularized two-dimensional inversion of magnetotelluric data by sequential use of damped least-squares and conjugate gradient algorithms

    MEHMET EMİN CANDANSAYAR

    Doktora

    Türkçe

    Türkçe

    2002

    Jeofizik MühendisliğiAnkara Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    PROF.DR. AHMET T. BAŞOKUR

  5. Doğru akım özdirenç ve manyetotellürik yöntemlerde sonlu elemanlar ile iki boyutlu düz çözüme topoğrafya etkisinin eklenmesi

    Two dimensional finite element forward modeling with topography in direct current resistivity and magnetotelluric methods

    ERHAN ERDOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Jeofizik MühendisliğiAnkara Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET EMİN CANDANSAYAR