Geri Dön

Murata vortex iplik eğirme sisteminde iplik eğirme düzesinin özelliklerinin ve konstrüksiyon yapısının iplik parametrelerine etkilerinin araştırılması

Investigation of the effects of nozzle properties and construction on yarn parameters in murata vortex spinning system

  1. Tez No: 318140
  2. Yazar: GİZEM KARAKAN GÜNAYDIN
  3. Danışmanlar: PROF. DR. GABİL ABDULLA
  4. Tez Türü: Doktora
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Vortex iplik, basınçlı hava, düze2012, 275 sayfa, Vortex yarn, pressured air, nozzle2012, 275 pages
  7. Yıl: 2012
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 297

Özet

İpliğin dönen hava jeti yardımıyla oluşturulması fikri basit görünmesinden dolayı uzun süredir araştırmacıların ilgisini çekmektedir. Bu tür sistemler Vortex iplik eğirme sistemleri olarak tanınmaktadırlar. Murata firmasının hava jetli iplikçilik sistemleri üzerinde yaptığı çalışmalar sonucu en yeni sistem olarak kabul edilen Murata Vortex Eğirme sisteminin (MVS) başarısı %100 pamuk elyafının yüksek hızlarda (400m/dak) eğrilebilmesi ve oluşan iplik yapısının rotordan ziyade ring iplik yapısına benzemesiyle artmıştır.Çalışmanın ilk kısmında lif ve hava etkileşiminin tam olarak anlaşılması amacıyla, hava akımına maruz kalan lif ve ipliklerin davranışları, oluşan aerodinamik kuvvetler teorik hesaplamalarla incelenmiştir. Çalışmanın ikinci kısmında ise sırasıyla MVS 810 model ve MVS 861 model Vortex iplik eğirme makinelerinde farklı üretim parametreleri kullanılarak üretilen Vortex ipliklerin özellikleri karşılaştırılmıştır. Çalışmanın üçüncü kısmında ise literatür çalışması ve fabrika uygulamaları sonrası elde edilen sonuçlar ışığında orijinal bir Vortex iplik eğirme ünitesi tasarlanmış ve üretilmiştir. Çalışmanın dördüncü ve beşinci kısmında ise tasarlanan ve üretilen Vortex iplik eğirme ünitesi ile Vortex iplik üretim denemeleri yapılmıştır. Çalışmanın son kısmında üretilen Vortex iplik eğirme aparatının sanayi tipi MVS 810 model iplik makinesi üzerine montajı gerçekleşmiştir.Bu tez çalışmasının, dönen basınçlı hava etkisindeki liflerin hareket özellikleri ve vortex iplik oluşum teorisinin anlaşılabilmesi, farklı üretim parametrelerinin vortex iplik özelliklerine etkisinin anlaşılabilmesi konularında önemli katkılar sağladığı düşünülmektedir. Ayrıca çalışma kapsamında üretilen yeni Vortex iplik eğirme ünitesinin; Vortex iplik eğirme teorisinin temel elemanlarını oluşturan düze-hava ve iplik ilişkisini inceleyen araştırmacılara ışık tutacağına inanılmaktadır.

Özet (Çeviri)

Studying the yarn formation with the swirling air concept arouse of interest of the researchers for a long time because it appears to be easy to understand as a spinning principle. These kind of systems are known as the vortex yarn spinning systems. The success of Murata Vortex Spinning system being accepted as the newest system after all studies of Murata air jet systems has been much acceptable especially for the spinning ability of %100 cotton in high speeds (400m/minute) and the yarn structure resembling ring yarn structure rather than rotor yarns.In the first part of this study the behaviour of fibers and the yarns which are exposed to the air flow and the aerodynamical forces are theoretically analysed in order to understand the interaction between the fiber and air flow totally. In the second step, the vortex yarns respectively produced on MVS 810 and MVS 861 Vortex spinning machines with various processing parameters are compared to each other. In the third step, by using the results obtained from the literature surveys and the experimental studies at the factory, a new Vortex spinning unit was designed and produced. In the fourth and the fifth step, some experiments aimed at producing vortex yarns with the new designed and produced vortex spinning unit were carried out. And In the final part of the study, the new designed and produced Vortex spinning unit was installed on the industrial type of MVS 810 vortex spinning machine.It was thought that this study will provide a significant contribution related to analysis of the movement behaviours of the fibers under the influence of swirling pressured air, the vortex yarn formation and the effect of different process parameters on vortex yarn . Also it is believed that the new produced Vortex spinning system will set light to the researchers investigating on interactions between the nozzle-air and yarn which constitute the basic elements of the theory of vortex spinning

Benzer Tezler

  1. Murata vortex iplik eğirme sisteminde üretilen ipliklerin yapısal özellikleri ve bazı üretim parametrelerinin etkileri üzerine bir araştırma

    A study on the structural properties of yarns produced on the murata vortex spinner and the effects of some production parameters

    HÜSEYİN GAZİ ÖRTLEK

    Doktora

    Türkçe

    Türkçe

    2004

    Tekstil ve Tekstil MühendisliğiUludağ Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF.DR. ŞÜKRİYE ÜLKÜ

  2. Farklı kalınlık ve materyallere sahip vortex iplikler ve özellikleri

    Properties of vortex yarns with different linear densities and materials

    PINAR KARAGÖL ÇAPRAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Tekstil ve Tekstil MühendisliğiUşak Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYŞE EBRU TAYYAR

  3. Farklı iplik üretim sistemleri ile eğrilmiş ipliklerin fiziksel özellikleri ve bobin boyama performansının incelenmesi

    An investigation of the physical properties and dyeing performance of yarn produced by using different spinning systems

    HALİL ÖZDEMİR

    Doktora

    Türkçe

    Türkçe

    2009

    Tekstil ve Tekstil MühendisliğiÇukurova Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. R. TUĞRUL OĞULATA

  4. Investigation of dyeing performance and physical properties of 100% cotton yarn produced by different spinning systems

    Farklı eğirme sistemleriyle oluşturulmuş % 100 pamuktan eğrilmiş ipliklerin fiziksel özellikleri ve bobin boyama performansının incelenmesi

    HALİL ÖZDEMİR

    Doktora

    Türkçe

    Türkçe

    2009

    Tekstil ve Tekstil MühendisliğiÇukurova Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. RAMAZAN TUĞRUL OĞULATA

  5. Yüksek hücum açılarında aerodinamik ve girdap kestirimi

    Aerodynamics and vortex estimation at high angles of attack

    MURAT AYAR

    Doktora

    Türkçe

    Türkçe

    2023

    Uçak MühendisliğiEskişehir Teknik Üniversitesi

    Uçak Gövde Motor Bakım Ana Bilim Dalı

    PROF. DR. TAHİR HİKMET KARAKOÇ