Geri Dön

Polyester esaslı taneli kompozitlerin (mermerit) bazı fiziksel ve mekanik özelliklerine bileşenlerinin etkisi

Effect of component specificity on some physical and mechanical properties of granulated composites with polyester matrix (artificial marble)

  1. Tez No: 318165
  2. Yazar: OKTAR SOYKAN
  3. Danışmanlar: YRD. DOÇ. DR. CENGİZ ÖZEL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mühendislik Bilimleri, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2012
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Yapı Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 118

Özet

Gelişen teknoloji ile ortaya çıkan atıkların miktarı ve çeşitleri de her geçen gün artmaktadır. Günümüzde bu atıkların oluşturduğu çevre kirliliği ve bu ürünlerin üretilmesinde kullanılan hammaddelerin hızla tükenmesi bu atıklardan tekrar yararlanmayı zorunlu kılmaktadır.Bu çalışmada mermer atık parçaları, andezit atık parçaları ve arduvaz atık parçalarının farklı elek aralıkları kullanılarak iki farklı polyester tipi ile (P-3455, P-314) polyester esaslı kompozit malzeme üretiminde değerlendirilmesi amaçlanmıştır. Polyester esaslı kompozitlerin (mermerit) mekanik ve fiziksel özelliklerine polyester tipinin (2 farklı), mineral tipinin (3 farklı) ve agrega çapının (7 farklı) etkisi araştırılmıştır. Yapılan çalışma sonucunda polyester tipinin, mineral tipinin ve agrega çapının Polyester esaslı kompozitlerde etkili olduğu belirlenmiştir. Üretilen numunelere taze (taze birim hacim ağırlık(BHA), reaksiyon sıcaklığı) ve sertleşmiş (basınç mukavemeti, eğilme mukavemeti, sertleşmiş BHA, schmidt yüzey sertliği, ultrases geçiş hızı tayini, farklı sıcaklıklar altındaki basınç mukavemeti değişimi, aşınma dayanımı, çizilme, kapiler su emme) deneyler uygulanmıştır. Yapılan deneysel çalışmalar sonucunda polyester tipi, mineral tipi ve tane çapına göre Polyester esaslı kompozitlerin taze ve sertleşmiş özelliklerinin değiştiği, mineral tipinin ve tane çaplarının bu değişimlerle yüksek derecede ilişkili olduğu, bununla birlikte bu parametrelerin tek başlarına doğrudan etkili olmadığı polyester tipinin minerallerle girdiği reaksiyonunda etkili olduğu sonucuna varılmıştır.

Özet (Çeviri)

The amount and types of wastes emergent from developing technology is increasing every day. Today environmental pollution and the waste formed the rapid depletion of raw materials used in the manufacture of these products benefit these wastes requires again.In this study, waste pieces of marble, waste pieces of andesite and slate waste fragments and pieces have been used different mesh ranges of different mesh polyester type (P-3455, P-314) to evaluate the production of polyester-based composite material. Polyester resins (mermerit), mechanical and physical properties of polyester type (2 different), mineral type (3 different), and the diameter of aggregates (7 different) the effect have been investigated. As a result of the scientific study polyester type of the mineral type and aggregate diameter of the polyester-based composites are effective. Composites produced fresh (fresh BHA, the reaction temperature) and hardened (compressive strength, flexural strengthhard BHA, schmidt surface hardness, ultra-sound determination of the transition rate, change in compressive strength under different temperatures, abrasion resistance, scratch, capillary water absorption) tests were applied. As a result of experimental studies, the type of polyester, polyester-based composites based on mineral type and particle diameter changes of fresh and hardened properties, mineral type and particle diameter is associated with a high degree of these changes, but polyester is not effective alone directly into the type of minerals are found to be effective in the reaction.

Benzer Tezler

  1. Development of organic based photovoltaic fiber

    Organik esaslı fotovoltaik lif geliştirilmesi

    İSMAİL BORAZAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2012

    Tekstil ve Tekstil Mühendisliğiİstanbul Teknik Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. ALİ DEMİR

  2. Polyester esaslı kompozit kazıklarda performansın model deneylerle araştırılması

    Investigation of performance with model experiments for polyester based composite piles

    ŞEYMA NUR BÖLÜKBAŞI

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiKonya Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖZCAN TAN

  3. Polyester esaslı termoplastik elastomerlerden esnek vefonksiyonel nanokompozit üretimi

    Production of flexible and functional nanocomposites frompolyester based thermoplastic elastomers

    RUMEYSA BETÜL AYDOĞDU

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Polimer Bilim ve TeknolojisiYalova Üniversitesi

    Polimer Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. OZAN TOPRAKÇI

  4. Polyester esaslı elektrostatik toz boyalarda yeni bir sertleştiricinin kullanılma koşullarının incelenmesi

    Examination of the conditions of use of a new hardener in polyester based thermosetting powder loatings

    ÖZER ÖZALP

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. TUNCER ERCİYES

  5. Polyester esaslı nonwoven (dokuma olmayan) kumaşların ısı geçirgenliği özelliğinin incelenmesi

    Investigation of thermal transition properties of polyester nonwoven fabrics (nonwoven)

    MUSTAFA SABRİ ÖZEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2001

    Tekstil ve Tekstil MühendisliğiMarmara Üniversitesi

    Tekstil Eğitimi Ana Bilim Dalı

    YRD. DOÇ. DR. ERKAN İŞGÖREN