Geri Dön

İkincil faz içeren çelik kompozitin toz metalurjisi yöntemi ile üretimi ve metalurjik karakterizasyonu

Production of second phase containing composite steel by powder metallurgy and its metallurgical characterization

  1. Tez No: 346774
  2. Yazar: YASİN YİĞİT
  3. Danışmanlar: DOÇ. DR. ŞÜKRÜ TALAŞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Teknik Eğitim, Technical Education
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Afyon Kocatepe Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Metal Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 94

Özet

Bu çalışmada Fe, B4C, Paslanmaz Çelik ve Düşük Karbonlu Çelik (Fe ASC) tozları, Fe, Paslanmaz Çelik ve Fe-ASC matrisli, %2.5, %5, %7.5, %10, %15 oranlarında B4C içeren karışımlar oluşturulmuştur. Karışımlar, tek eksenli sıkıştırma kalıbı ile 200 MPa basınç kullanılarak preslenmiştir. Presleme sonrası B4C+Fe, B4C+Paslanmaz Çelik, B4C+Fe ASC numuneleri elde edilmiştir. Hazırlanan numuneler 600 ºC, 800 ºC, 1000 ºC de 60 dk süre ile, Argon gazı altında tüp fırın kullanılarak sinterlenmiştir. Üretilen numunelerin sinterleme işlemi öncesinde ve sonrasında ağırlığı ve ebatları ölçülmüştür. Sinterleme sonrasında ortaya çıkan fazları tanımlamak için XRD ve morfolojik özellikleri araştırmak için standard metalografik analizine tabi tutulan numunelerin, Taramalı Elektron Mikroskobunda (SEM) bileşim değişimi analizi ve morfolojik özellikleri incelenmiştir. En düşük katkılı olarak üretilen sinterlenmiş numuneler, en iyi fiziksel değerleri sağlamıştır. Numunelerde reaksiyon sonucu oluşan bileşik türü artan sinterleme sıcaklığı ile beraber azalmıştır.

Özet (Çeviri)

In this study, powders of Fe, Low Carbon Steel (Fe-ASC) and Stainless Steel were mixed with ratios of %2.5, %5, %7.5, %10, %15 of B4C to produce Fe, Low Carbon Steel (Fe-ASC) and Stainless Steel matrix composites. The mixtures were compacted using single axis die at 200MPa compaction pressure. Following the compaction, mixtures of B4C+Fe, B4C+Stainless Steel and B4C+FeASC composites were obtained and sintered at 600 ºC, 800 ºC and 1000 ºC for 60 mins under Argon atmosphere in conventional tube furnace. The weights and dimensions of specimens were measured before and after sintering. X-Ray Diffractions studies and standard metallographic analysis were carried out in order to define the phases formed after sintering and reveal the morphology of the specimens of which their chemical changes and morphology were also investigated using Scanning Electron Microscopy (SEM). Specimens with lower additions of B4C are found to be of physically good quality. The types of compounds following the reaction were found to be less with increasing sintering temperature.

Benzer Tezler

  1. Production and characterization of spark plasma sintered boron carbide ceramic composites suitable for ballistic use

    Balistik kullanıma uygun bor karbür seramik kompozitlerinin spark plazma sinterleme yöntemi ile üretimi ve karakterizasyonu

    BURCU APAK GÜLSEVER

    Doktora

    Türkçe

    Türkçe

    2018

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. FİLİZ ŞAHİN

  2. Grafen esaslı kompozit kaplamaların korozyon ve aşınma özellikleri

    Corrosion and wear properties of graphene based composite coatings

    KUBİLAY KILIÇÇI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Metalurji MühendisliğiSakarya Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MEHMET UYSAL

  3. AIN-B4C kompozitelerinin üretimi

    Processing of ain-B4C/all composites

    MENDERES ÇIRAKOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. ADNAN TEKİN

  4. Thermal oxidation of titanium-based cold spray coatings for biological and wear-related applications

    Biyolojik ve aşınmaya yönelik uygulamalar için soğuk dinamik gaz püskürtme tekniği ile üretilmiş titanyum bazlı kaplamaların termal oksidasyonu

    DOĞUKAN ÇETİNER

    Doktora

    İngilizce

    İngilizce

    2022

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. HÜSEYİN ÇİMENOĞLU

    PROF. DR. ERDEM ATAR

  5. Yanma sentezi yöntemi kullanılarak intermetalik malzeme esaslı kaplama üretimi ve yüzey özelliklerinin incelenmesi

    Production of coating based on intermetallic materials using by combustion synthesis technique

    GÖKHAN YÖRÜK

    Yüksek Lisans

    Türkçe

    Türkçe

    2010

    Metalurji MühendisliğiSakarya Üniversitesi

    Metal Eğitimi Ana Bilim Dalı

    YRD. DOÇ. DR. ÖZKAN ÖZDEMİR