CNC tornalamada vorteks tüplü soğutma sistemi performansının incelenmesi
Investigation of the cooling performance of vortex tube system in CNC turning process
- Tez No: 357127
- Danışmanlar: YRD. DOÇ. DR. AYHAN ONAT
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Metalurji Mühendisliği, Mechanical Engineering, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 95
Özet
İş parçası üzerinden talas kaldırma esnasında kesme kuvvetlerini olusturmak için kullanılan enerjinin tamamına yakını ısıya dönüsür. Bu sebeple kesme bölgesinde olusan ısı, talas kaldırma isleminde önemli bir faktör olup, takım performansı ve is parçası kalitesi açısından büyük bir öneme sahiptir. Dolayısıyla kesme esnasında meydana gelen sıcaklıgın kontrol altına alınması kesme performansı ve ürün kalitesini artırmada önemli bir faktördür. Aynı zamanda günümüzde kullanılan geleneksel sogutma yöntemlerinin çevreye ve insan saglıgına verdigi zararlar herkesçe bilinmektedir. Kesme sıvılarının kullanılmasında, soguma performansına saglamıs oldugu faydalara ragmen, çevresel etkileri ve üretim maliyetlerindeki artıslarından dolayı da endise vermektedir. Bu sebeplerden ötürü bizi farklı sogutma yöntemlerine olan arayıslarımızı giderek artırmaktadır. Bu farklı sogutma yöntemlerinden biri de vorteks tüpü ile sogutmadır. Vorteks tüplerin verimi, geleneksel sogutma sistemlerine göre oldukça düsük olmasına ragmen, ilk yatırım maliyetlerinin düsük olması ve gecikmesiz olarak rejime girmesi bazı uygulamalar için vorteks tüplerinin kullanımını ön plana çıkarmaktadır. Yapılan bu çalısmada geleneksel sogutma yöntemlerine bir alternatif olan vorteks tüplü sogutma sistemini, tornalama uygulamalarında kullanılmıs ve sogutma performansı incelenmistir. Çalısmada farklı kesme parametreleri ve Vorteks tüpünden elde edilen farklı sogutma sıcaklıkları ile isleme sonunda olusan sonuçlar kıyaslanmıstır. Bu çalısmada kesme kuvvetleri, olusan sıcaklıklar ve yüzey kaliteleri analiz edilmistir. Yapılan bu tez çalısmasında çevreye en az zarar veren, kesme performansı ürün kalitesini iyilestirici tornalama sartları optimize edilmistir.
Özet (Çeviri)
During the machining on work piece, almost all of this energy converted to heat for create to shear stress. Therefore the heat which generated in cutting zone, has a great importance in terms of performance and quality of the workpiece in machining process. so, controlling the heat generated from cutting process is an important factor in improving the quality of the product and performance of the cutting. Beside this, we all know the damage given by the currently used traditional cooling systems on environment and human health. Although, the usage of the cutting liquids contributes to the cooling performance, it increases the cost of production and has really poor impact on environment.Due to these reasons, our need of finding out different cooling techniques gradually increases. Especially the studies on sustainable manufacturing are increased in recent years. One of these cooling methods is the one with vortex tube.In this study vortex tube used cooling system would be used in turning applications and cooling performance of it is analyzed. Also, the impacts of this method on the quality of the product would experimentally is researched. The differences between the results arises out of the vortex tube used cooling systems and the results arises out of other type of cooling systems are compared by pegging the cutting parameters. Result of this study all generated cutting forces, heat and quality of product is analyzed.In this study it is realised that optimizing the turning conditions in which it damages least to the environment, has highest cutting performance and quality of product.
Benzer Tezler
- Co28Cr6Mo dövülmüş çeliklerin işlenmesinde kesici uç yarıçapının yüzey pürüzlülüğü üzerine etkisi
The effect on surface roughness of cutting tool radius in machining of Co28Cr6Mo wrought steels
MEHMET ALPER İNCE
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiSelçuk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. İLHAN ASİLTÜRK
- BSD tornalamada kesme kuvveti esaslı işleme hatasının incelenmesi ve bilgisayar desteğiyle düzeltilmesi
Investigation and computer aided compensation of cutting force induced machining errors in CNC turning operations
EYÜP SABRİ TOPAL
Doktora
Türkçe
2003
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. CAN ÇOĞUN
YRD. DOÇ. DR. DURMUŞ ODABAŞ
- CNC tornalama işleminde sanal adaptif kontrol sistemi geliştirilmesi
Development of a virtual adaptive control system on CNC turning process
OSMAN ÖZTÜRK
Yüksek Lisans
Türkçe
2017
Makine MühendisliğiSelçuk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ ÜNÜVAR
- CNC torna tezgâhları için kamera görüntüsü ile otomatik parça programlarının oluşturulması
Automatic generation of CNC part programs from camera images for CNC turning machine tools
SALİH CULHA
Yüksek Lisans
Türkçe
2012
Makine MühendisliğiGazi ÜniversitesiMakine Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. YUNUS KAYIR
- CNC torna tezgahında 17?4 PH paslanmaz çeliğin işleme parametrelerinin deneysel olarak belirlenmesi
Experimental determination of machining parameters of 17-4 PH stainless steel in CNC turning
ALİ KALYON
Yüksek Lisans
Türkçe
2010
Makine MühendisliğiMarmara ÜniversitesiMakine Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. MUSTAFA AY