Spray pyrolysis ve spin coating metotlarıyla elde edilen SnO2:Sb:F ince filmlerin bazı fiziksel özelliklerinin araştırılması
Investigation of some physical properties of SnO2:Sb:F thin films obtained by spin coating and spray pyrolysis methods
- Tez No: 361209
- Danışmanlar: PROF. DR. BAHATTİN DÜZGÜN
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Metalurji Mühendisliği, Physics and Physics Engineering, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Atatürk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Katıhal Fiziği Bilim Dalı
- Sayfa Sayısı: 193
Özet
%30 F ve %4 Sb katkılı kalay oksit ince filmleri (SnO2:Sb:F), hem spray pyrolysis (püskürtme) metoduyla hem de spin coating (dönel kaplama) metoduyla elde edilmiş, püskürtme metoduyla yapılan deneylerde püskürtme mesafesi etkisi, dönel kaplama metoduyla yapılan deneylerde kaplama sayısının etkisi araştırılmıştır. Püskürtme metoduyla büyütülen filmlerin XRD ölçümlerinden tüm filmlerin tercihli yönelimlerinin (200) düzleminde ve tetragonal yapıda olduğu görülmüş, ancak filmlerde ortorombik yapılara da rastlanmıştır. Dönel kaplama metoduyla elde edilen filmlerin XRD ölçümlerinden kaplama sayısıyla genelde artan kristalleşmeyle birlikte, sadece ortorombik (021) tercihli düzlemi ortaya çıkmıştır. UV-Vis spektrometresi ölçümlerinde, püskürtme metodunda %85 civarında optik geçirgenlik ve 3,60 eV civarında bant aralığı enerjisi değerleri, dönel kaplama metodunda ise %95 civarında optik geçirgenlik ve 3,80 eV civarında bant aralığı enerjisi değerleri elde edilmiştir. FTIR ölçümlerinde, her iki metotla elde edilen filmler için, SnO2'nin çeşitli bağ titreşimlerine rastlanmış, PL ölçümlerinden her iki metotla elde edilen filmlerde çeşitli bant geçişleri ve kusurların varlığı saptanmıştır. Elektron mikroskop ve AFM analizlerinden filmlerin, püskürtme metodunda artan püskürtme mesafesiyle, dönel kaplama metodunda ise artan kaplama sayısıyla giderek homojenleştiği ve tekdüze haline geldiği görülmüştür. Püskürtme metoduyla elde edilen filmlerin elektrik ölçümlerinden tabaka direncinin püskürtme mesafesine bağlı olarak 13,2 Ω / 'e kadar azaldığı ve mobilitenin ise 34,75 cm2/ Vs olduğu görülmüştür.
Özet (Çeviri)
30% F ve 4% Sb doped tin oxide thin films (SnO2:Sb:F) were deposited with both spray pyroylsis and spin coating methods. Sprey efffect were studied for spray pyrolysis method and coating number effect were examined for spin coating method. XRD measurements of films were deposited by spray method, preferential orientations of all films have (200) plane and the tetragonal crystal structure that was seen all the films, but also orthorhombic crystal sutructures had been found in films. XRD measurements of thin films were obtained by spin coating method; generally, crystallization increased when the number of coatings were increased, (021) orthorhombic preferred orientation have been found and other plane peaks have'nt been obtained. UV-Vis spectometer measurements results show that about 85% optical transmittance and about 3,60 eV band gap energy were obtained by spray pyrolysis method and also about 95% optical transmittance and about 3,80 eV band gap energy were obtained by spin coating method. The various bond vibrations of SnO2 was found at FTIR measurements of the films were obtained by two methods. PL measurements of the films were obtained by two methods indicated that films have various band transitions and defects. The electron microscop and AFM analysis show that when spray distance for spray pyrolysis and coating number for spin coating method are increased, homogenity and uniformity of films are increase. Furthermore, it was seen that sheet resistance decreased till 13,2 Ω / by changing spray distance and mobility were 34,75 cm2/ Vs in the electrical measurements of the films that were obtained by spray pyrolysis method.
Benzer Tezler
- Sol-gel yöntemi ile kaplanan indium oksit (IO) ve indium kalay oksit (ITO) ince filmlerinin mikroyapısal ve optik karakterizasyonu
The Microstructural and optical characterization of indium oxide (IO) and indium tin oxide (ITO) thin films deposited by sol-gel method
ERKAN DEMİRCİ
Yüksek Lisans
Türkçe
2003
Fizik ve Fizik MühendisliğiGebze Yüksek Teknoloji EnstitüsüFizik Ana Bilim Dalı
YRD. DOÇ. DR. HASAN M. ASLAN
- Organik yarıiletken tabanlı fotovoltaik aygıtlar için şekilli ince film altlıkların kullanımı ve etkilerinin incelenmesi
The effect of the usage of sculptured thin film substrates for organic semiconductor based photovoltaic devices
DİLEK DEMİROĞLU
Doktora
Türkçe
2019
Enerjiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KAMİL ÜRGEN
DR. ÖĞR. ÜYESİ BEYHAN TATAR
- Farklı üretim koşullarında sentezlenen ZnFeO bileşiklerinin karakterizasyonunun derlenmesi
Evaluation of characterization of ZnFeO compounds synthesis in different production conditions
İBRAHİM POLAT KÖLÜK
Yüksek Lisans
Türkçe
2019
Fizik ve Fizik MühendisliğiDicle ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. GÜLTEN KAVAK
- Structural and optoelectronic properties of vanadium pentoxide thin films deposited by ultrasonic spray pyrolysis
Ultrasonik sprey kaplama yöntemi ile üretilen vanadyum pentoksit ince filmlerinin yapısal ve optoelektronik özelliklerinin incelenmesi
ŞEYMA KOÇ
Yüksek Lisans
İngilizce
2019
Bilim ve TeknolojiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. HÜSNÜ EMRAH ÜNALAN
DR. ÖĞR. ÜYESİ SİMGE ÇINAR
- Nikel oksit filmlerinin farklı yöntemlerle elde edilmesi ve bazı fiziksel özelliklerinin incelenmesi
Deposition of the nickel oxide films with different methods and investigation of some of its physical properties
TURAN TAŞKÖPRÜ
Doktora
Türkçe
2016
Fizik ve Fizik MühendisliğiAnadolu ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. EVREN TURAN
PROF. DR. MUHSİN ZOR