Sipariş tipi üretim yapan bir işletmede üretim hattı iyileştirme uygulaması
Production line improvement application in a facility which makes to order production
- Tez No: 379535
- Danışmanlar: PROF. DR. EMİN GÜNDOĞAR
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Sistem benzetimi, Süreç iyileştirme, Üretim hattı dengeleme, System simulation, Process improvement, Production line balancing
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Endüstri Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Gelişen teknolojiyle birlikte işletmelerin, rekabet güçlerini arttırmak ve maliyetlerini düşürmek için üretim süreçlerini gözden geçirmek ve gerekli iyileştirmeleri yapmaları elzem hale gelmiştir. Hat dengelemenin amacı, kaliteden ödün vermeden çalışma sürelerini birbirlerine yakın seviyelere getirmek, boşta bekleme zamanlarını ve kuyrukları önlemektir ve işletmedeki iyileştirme çalışmalarına yön vermektedir. Yapılmış olan çalışmada boyahane hattında oluşan darboğazın nedenleri incelenirken FWR(Yarı Römork Şasi) nin boyahane hattından 2 kez geçmesinin boyahane kapasitesini gereksiz yere meşgul ettiği tespit edilmiştir. FWR nin boyahane hattından tek seferde çıkabilmesini sağlamak için aks seti tedarikçi firmadan parçalı halde satın alınmaya başlanmıştır. Bu değişikliğin etkisi olarak hat üzerindeki dengeyi sağlamak için bazı istasyonlar, aparatlar, fikstürler, işlemler kaldırılmış, bazı istasyonlar ve işlemler eklenmiştir. Son olarak bu iyileştirmenin model ile desteklenmesi için bir benzetim modeli oluşturularak ilk durum değerleri ile oluşturulan iki yeni durum arasındaki farklılıklar gözlenmeye çalışılmıştır. Ayrıca hattın dengelenmesi yanı sıra ürün maliyetini etkileyen kalemlerde de olumlu sonuçlar elde edilebileceği öngörülmüştür.
Özet (Çeviri)
With the developing technology, thereview of manufaturing processes and necessary improvements required to increase the competitiveness of the facilities and reduce the cost of manufacturing have become essential. The aim of the line balancing is to make operation times closer levels to each other, prevent idle times and queues without sacrificing quality and it directs the improvement studies in the plant. In this study, it was determined that the FWR (semitrailer chasis) processed twice in the paintshop occupy the capacity of the paint shop redundantly while investigating the reasons of the bottleneck in the paintshop. It was started that the axle set was purchased from the supplier in piece to provide the FWR get out of the paintshop at once. As the effect of this change, some stations, equipments , fixtures,operations were removed ; some stations and operations were added to provide balance on the line. Finally, the differences between the first situation and the new two situations were tried to be observed by creating a simulation model to support this improvement with the model. Furthermore, it is estimated that positive results will be obtained at the items which affect the cost of the product besides the balance of the line.
Benzer Tezler
- Malzeme istekleri planlaması (MİP)
Material requirement planning system
ALİ ÇETİN
Yüksek Lisans
Türkçe
1985
İşletmeEge ÜniversitesiBilgisayar Bilimleri ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. M. ÖZEL ERGEN
- Uygulamada bilgisayar destekli üretim kontrol ve sipariş takip sistemi
Başlık çevirisi yok
C.TURHAN İLTER
Yüksek Lisans
Türkçe
1987
Endüstri ve Endüstri MühendisliğiAnadolu ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NİMETULLAH BURNAK
- Pazarlama bilgi sisteminde sipariş alma ve satış işlemleri ve bir uygulama
Başlık çevirisi yok
FAHİRE BAYKAL