Promotörlerin Fisher-Tropsch katalizörlerinin performansına etkisinin incelenmesi
Investigation of effects of the promoters on performance of Fischer-Tropsch catalysts
- Tez No: 389305
- Danışmanlar: PROF. DR. HÜSNÜ ATAKÜL
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 97
Özet
Petrol rezervlerinin sınırlı, birçok ülkenin bu konuda dışa bağımlı olması ve ham petrol fiyatlarının gittikçe artması, kömür veya doğalgazdan sıvı yakıt ya da kimyasalların üretilmesine olan ilgiyi artırmaktadır. Fischer-Tropsch (FT) sentezi, karbon ve hidrojen içeren çeşitli kaynaklardan sentetik sıvı yakıt üretilmesinde kullanılan kimyasal bir yöntemdir. Bu nedenle, bütün dünyanın, özellikle de petrol kaynakları sınırlı olan ülkelerin dikkatini çekmekte ve bu alandaki çalışmaları gittikçe yoğunlaştırmaktadır. Geleneksel FT katalizörleri ile elde edilen hidrokarbon ürünlerin bileşimi, metandan kırk karbonlu ve daha uzun zincirli hidrokarbonlara kadar değişen geniş bir dağılım göstermektedir. Elde edilen ham ürün karışımları daha sonra parçalama, izomerizasyon… gibi çeşitli süreçler uygulanarak benzin ve dizel… gibi istenilen yakıtlara/kimyasallara dönüştürülmektedir. Aktif metal ve zeolitlerin birlikte kullanılamasıyla sentezlenen“bi-fonksiyonel”katalizörlerin kullanılmasıyla FT sentezinden sonra, uygulanan bu iki süreci tek bir süreç halinde gerçekleştirmek mümkün görünmektedir. Zeolitler, özgün kanal ve gözenek yapılarıyla, özellikle petrokimya endüstrisinde geniş kullanım alanına sahiptir. Bu malzemeler, asidik karakterlerinden dolayı parçalama (hydrocracking) ve izomerizasyon gibi kimyasal süreçlerde etkin katalizörler olabilmektedirler. FT reaktöründe üretilen hidrokarbon ürünlerin içerdiği benzin ve dizel fraksiyonlarının arttırılması amacıyla kullanılan katalitik malzemelerin başında zeolitler gelmekte ve FT katalizörleri ile birlikte FT sentezinde kullanılmaktadırlar. FT sentezinde istenilen ürün seçiciliğine ulaşmanın en önemli unsuru kullanılan katalizörlerdir. Bunun yanısıra, destek malzemesi, promotörler, katalizör hazırlama yöntemleri… gibi diğer bir çok faktör de ürün seçiciliğini etkileyebilmektedir. Endüstriyel açıdan en çok tercih edilen katalizörler demir ve kobalt esaslı katalizörleridir. Bu aktif metaller ile zeolitin birlikte kullanıldığı katalizörlerle gerçekleşen kimyasal süreçlerde; aktif metaller hidrokarbonların oluşmasını sağlarken, zeolit parçalama ve izomerizasyon reaksiyonları yoluyla oluşan hidrokarbonların zincir uzunluklarını etkilemekte ve şekillenmesine katkıda bulunmaktadır. Katalizör sentezinde bu iki ana bileşenin dışında, daha az miktarlarda olmak üzere başka elementler de kullanılmaktadır. Bu katkı maddeleri“promotör”olarak isimlendirilmektedir. Promotörler, katalizörlerin FT sentezi sırasında oluşan çeşitli ürünlere karşı olan seçiciliklerini etkileyebilen önemli faktörlerden biridir. Promotörler, bunun yanısıra, reaksiyon hızlarını, katalizörlerin yüzey alanını, mekanik dayanaklılığını ve stabilitesini artırmak.. gibi birçok etkiye sahiptir. Bu tez kapsamında, promotörlerin zeolit destekli demir katalizörü üzerinde FT sentez performansını etkilemesi incelenmiştir. Çalışmada, hazırlanan katalizöre çeşitli metaller promotör olarak eklenmiş ve bunların katalizörlerin aktivitesi ve seçiciliklerine olan etkileri araştırılmıştır. Böylece hazırlanan katalizörler 1. aktif bileşen, 2. destek malzemesi ve 3. Promotörler olmak, üzere üç ayrı malzemeden oluşmuştur. Gerçekleştirilen deneysel çalışmalarda destek malzemesi olarak ZSM-5, aktif metal olarak demir ve promotör olarak bakır (Cu), potasyum (K) ve mangan (Mn) kullanılmıştır. Promotörler, tek tek, ikili ve üçlü matrisler şeklinde katılarak katalizör performanslarına olan etkileri incelenmiştir. Bu kapsamda bir tanesi promotörsüz (baz katalizör) ve yedi tanesi promotörlü olmak üzere toplam sekiz adet katalizör sentezlenmiş, karakterize edilmiş ve bunların FT sentezindeki performansları incelenmiştir. Bunlar, FeZ, CuFeZ, KFeZ, MnFeZ, CuKFeZ, CuMnFeZ, KMnFeZ ve CuKMnFeZ olarak kodlandırılmıştır. Sentezlenen katalizörler, XRD, AAS, SEM, TPR ve BET gibi çeşitli analiz yöntemleri kullanılarak karakterize edilmiştir. Katalizörlerin FT sentezlerinden elde edilen gaz ve sıvı faz ürünlerinin bileşimleri gaz kromatografi cihazları kullanılarak analiz edilmiştir. Katalizörlerin FT sentezindeki aktivite/performans testleri ise basınçlı sabit yatak tipi bir reaktör kullanılarak gerçekleştirilmiştir. Elde edilen deneysel sonuçlara göre sentezlenen bütün katalizörlerin FT sentezinde aktivite gösterdikleri belirlenmiştir. Ancak katalizörlerin aktivite dereceleri, beklenildiği gibi farklı olmuştur. Eklenen promotörlerin katalizörlerin aktivite ve seçiciliklerini etkiledikleri görülmüştür. En yüksek dönüşüm değeri potasyum promotörlü ZSM-5 destekli demir katalizöründe (KFeZ) elde edilmiştir. Eklenen tüm promotörler baz katalizörün (FeZ) metan seçiciliğini düşürmüş ve benzin grubu hidrokarbon seçiciliğini artırmıştır. Baz katalizörde %44.7 olan benzin grubu hidrokarbonlar eklenen promotörlerle bu oran %69.8'e kadar çıkmıştır. Çalışmada sıcaklık, GHSV ve H2S'ün katalizör aktivitesi ve seçicililiğine olan etkisi de incelenmiştir. CuFeZ katalizörü kullanılarak üç farklı sıcaklıkta gerçekleştirilen performans çalışmalarında sıcaklığın artmasıyla CO ve H2 dönüşümlerinin ve WGS aktivitesinin arttığı, FT sentezinde elde edilen ürünlerde, hidrokarbon dağılımının hafif hidrokarbonlara doğru kaydığı görülmüştür. Baz katalizör (FeZ) kullanılarak farklı GHSV'lerde gerçekleştirilen performans çalışmaları ise, beklenildiği gibi, CO* ve H2 dönüşümlerinin GHSV'nin artmasıyla azaldığını ortaya koymuştur. Fakat GHSV'nin değişmesi FT sentezi ile üretilen üründeki hidrokarbon dağılımını pek fazla değiştirmemiştir. Çalışmada incelenen diğer bir konu da H2S'ün baz katalizöre olan etkisi olmuştur. 30 ppm H2S içeren sentez gazıyla yapılan çalışmada katalizörün aktivitesindeki düşüşün ilk 100 saat içinde göreceli olarak sınırlı kaldığı daha sonra katalizörün hızla deaktivite olduğu ve buna paralel olarak aktivitenin hızla düştüğü gözlenmiştir.
Özet (Çeviri)
With the increase in the cost of petroleum products due to depletion of oil reserves, alternative methods for synthesizing hydrocarbon fuels such as the Fischer–Tropsch (FT) Synthesis have received considerable attention. The FT synthesis is a well-known catalytic process for the conversion of synthesis gas into liquid fuels. The main product of the process is a mixture of hydrocarbons of variable molecular weight. The hydrocarbone product spectrum produced by conventional FT catalyst is very broad and many studies have been carried out with the aim of controlling and limiting the product distribution. The resulting product is threated by various operations such as cracking and isomerization to obtain the desired chemical products such as diesel and gasoline. It is possible to combine these two steps into a single process by using bi-functional catalysts made of zeolite and active catalyst. Zeolites, with their unique channel and por structure properties, have a wide range of applications, especially in the petrochemical industry. Zeolites are good hydrocracking and isomerization catalyst due to their asidic form. Because of this, they are combined with FT catalyst in order to increase the gasoline and diesel fractions in the FT product, so that the downstream upgrading unit might be discarded. . Controling of the product distrubition is typically achieved by modification of the catalyst. Many factors, like support material, promoters and preparation method of catalyst affect the product selectivity. Although some catalytic materials are composed of a single material, most catalysts are composed of three different types of components: 1. active component, 2. a support or carrier and 3. promoters. Active components are responsible for the principal chemical reaction. Selection of the active component is the first step in catalyst design. FT catalysts are typically based on group VIII metals – Fe, Co, Ni and Ru. Industrially, the most preferred catalysts are iron and cobalt catalysts. Cobalt based catalysts mainly yield straight-chain hydrocarbons while iron-based catalysts are more useful when the H2/CO ratio is low (due to the water gas shift (WGS) activity of Fe) or for the production of alkenes, oxygenated products, and branched hydrocarbons, depending upon promoters and process conditions employed. In order to obtain the desired reactions using zeolite catalysts, process temperatures need to be about 300℃. However, at these temperatures, cobalt based bi-functional catalysts have very high methane selectivity. The methane selectivity of iron catalysts at the same temperature level is lower. Furthermore, iron catalysts favor the production of primary olefins, which then can be converted into the gasoline range hydrocarbons via zeolite in the bi-functional catalysts. Hydrocarbons are produced by active metal and chain length of the hydrocarbons are arranged by zeolites with cleavage and isomerization reaction. Promoter is one of the important factor affecting the product selectivity. Besides, enhancing the selectivity towards the desired product, promoters have many other effects such as increasing the reaction rate the surface area, and the mechanical resistance and ensuring the stability of the catalyst. Chemical promoters, such as K, Cu, Ru, Zn, etc., are often added into iron-based catalyst. Especially, Cu and K promoters have been proved to promote the reduction of iron-based catalyst as well as the adsorption and dissociation of CO and play an important role in the FT synthesis performances. In this thesis, promoters were added on the zeolite-supported iron catalyst and their effects on the catalyst activity and selectivity were examined. In this context, the prepared catalysts consisted of three components: the active metal, support material and promoter. In experimental studies, ZSM-5 with very high silica to alumina ratio of 280 was used in the catalyst synthesis due to its low acidity and cation exchange sites. The purpose for choosing this zeolite as a support was to take advantage of its shape selectivity and ability of suppressing the effect of alkali migration on zeolite caution exchange sites. The active metal was iron and promoters were Cu, K, and Mn. Catalysts with single promoter, two and tree promoters were prepared and investigated in order to determine the effects of promoters on the performance of zeolite-iron bi-functional catalyst in FT synthesis. Eight catalysts were synthesized, characterized and tested. The catalysts were synthesized by incipient to wetness impregnation. The synthesized catalyst are designated as FeZ, CuFeZ, KFeZ, MnFeZ, CuKFeZ, CuMnFeZ, KMnFeZ and CuKMnFeZ based on the added promoters. FeZ is the bi-functional“base catalyst”which synthesized from zeolite and iron, others are“catalysts with promoters”(ie: Cu, K, Mn, Cu-K, Cu-Mn, K-Mn and Cu-K-Mn) prepared by adding of promoters to the base catalyst. The catalysts were characterized by using AAS, XRD, SEM, TPR and BET analyses methods. Activity tests of catalysts were carried out in a pressurized fixed bed type reactor. The performances of the catalysts were tested at different temperatures with a fixed H2/CO ratio and operating pressure. The gas and liquid phase products from the FT reactor were analyzed by using gas chromatography method. All catalysts studied were found to be active in FT reactions. The performances of catalysts were compared based on the activity and selectivity. The promoter type was found to have a considerable impact on the activities and selectivities of catalysts. The highest reactant conversions were obtained with potasium (K) promoted catalysts. Base catalyst displayed the highest methane selectivity and with the addition of promoters methane selectiviy was reduced. The selectivity toward gasoline range hydrocarbons (C5–C11) was increased with promoted catalysts. MnFeZ and CuKMnFeZ catalysts displayed the highest selectivity toward gasoline range hydrocarbons. The selectivity toward C5–C11 hydrocarbons of promoted catalysts varied between 48.5% and 69.8%. Results of FT products analysis showed that potasium increased the chain length and shifted product distribution to the heavy hydrocarbon.The highest C12+ selectivity was obtained by KMnFeZ and KFeZ catalysts. In the meantime the highest gas phase olefin selectivity and WGS activity was achieved by potasium promoted catalysts. These results show that, potasium promoter increased the WGS activity and olefin selectivity. In the study, the effects of process parameters such as reaction temperature, gas hourly space velocity (GHSV) and presence of H2S on the catalyst performance were also investigated. Results of experiments carried out with the copper promoted catalyst (CuFeZ) at three different temperatures indicated that the CO and H2 conversions and WGS reaction activity increased with increasing reaction temperature. Opearating temperature also affect the product composition with product distribution shifting to the ligth hydrocarbons as temperature increased. The effect of gas hourly space velocity (GHSV) was investigated for the base catalyst (FeZ). As it might be expected, the conversions decreased as GHSV increased, but the compositions of the FT products seemed not to be affected. Experiment carried out by using 30 ppm H2S containing synthesis gas and a synthesized catalyst (FeZ) showed a relatively limited drop in the catalyst activity in first 100 hours of operation after which activity fastly decreased with time.
Benzer Tezler
- Development of selective iron-based fischer-tropsch catalysts to light olefins
Hafif olefinler için seçici demir bazli fischer-tropsch katalizörlerinin geliştirilmesi
YASEMİN FATİH AGHDAEI
Doktora
İngilizce
2023
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSNÜ ATAKÜL
DOÇ. DR. ALPER SARIOĞLAN
- Effects of Cu and K on the performance of Fe/γ-Al2O3 catalysts used in the light olefins production
Cu ve K'un hafif olefin sentezınde kullanılan Fe/γ-Al2O3 katalizörlerinin performansına etkisi
HADI RAHNAMAEI ZONOUZ
Yüksek Lisans
İngilizce
2019
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSNÜ ATAKÜL
- Fischer-Tropsch sentezi̇ i̇le hafi̇f olefi̇n üreti̇mi̇ i̇çi̇n azot ve bor doplu akti̇f karbon destekli̇ demi̇r katali̇zörleri̇ni̇n geli̇şti̇ri̇lmesi̇
Development of nitrogen and boron doped activated carbon supported iron catalysts for light olefin production by Fischer-Tropsch synthesis
PINAR ŞAKOĞLU
Yüksek Lisans
Türkçe
2022
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPER SARIOĞLAN
DR. OSMAN OKUR
- Farklı demir öncüllerinin ve seryum fonksiyonlarının FT-olefin performansına olan etkilerinin incelenmesi
Investigation the effect of different iron precursor and cerium functions on FT-olefin performance
DENİZ BİLGİN
Yüksek Lisans
Türkçe
2023
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ GAMZE GÜMÜŞLÜ GÜR
- Effect of promoters on activated carbon supported Fe catalyst for light olefins production via Fischer-Tropsch synthesis
Fısher-Tropsch senteziyle hafif olefin üretiminde aktif karbon destekli fe katalizörü üzerinde promotör etkisi
MELİS KIRARSLAN
Yüksek Lisans
İngilizce
2019
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ GAMZE GÜMÜŞLÜ GÜR
DR. GAMZE BEHMENYAR