Nanokompozit malzeme kullanarak sulu çözeltilerden Cs(I) uzaklaştırılması
Cesium removal from aqueous solution using nanocomposite material
- Tez No: 392981
- Danışmanlar: PROF. DR. GÜLEREN DÖNER
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Radyonüklid içeren radyoaktif atıklar en tehlikeli çevresel atık olarak düşünülürler. İçerdikleri radyonüklidlerin uzun yarı ömürlü, yüksek fizyon ürünleri olması, atmosferde çok hızlı bir şekilde hareket edebilmesi ve canlı metabolizmasına çok kolay bir şekilde katılması bu radyonüklidleri çok tehlikeli olmasının başlıca nedenlerindendir [1]. Radyoaktif atıklar nükleer güç santralleri işletilmesi sırasında ve bunların kazası sebebiyle, radyoizotop üretim tesislerinden, nükleer yakıt geri işlenmesinden ve üniversitelerin radyokimya laboratuvarlarından meydana gelirler. Bu radyonüklidler arasında en yaygın olanı Cs-137 ve Sr-90 radyoizotoplarıdır. Bu sebeple bu iki radyonüklidin sulu radyoaktif atık çözeltilerinden uzaklaştırılması çok önem kazanmıştır[2]. Günümüze kadar, sulu radyoaktif atıklardan Cs (I) ve Sr (II) iyonlarının uzaklaştırılmasında birçok metod uygulanmıştır. Bunların en önemlileri iyon değiştirme, çöktürme, adsorpsiyon, çözücü ekstraksiyon, elektrokimyasal ve membran prosesleridir. Adsorpsiyon prosesi diğer yöntemlere göre düşük maliyeti, termal kararlılığı, iyonlaştırıcı radyasyona karşı dirençliliği ve atığın son formuyla uyumlu olması nedenleri ile en çok tercih edilenidir[3]. Son zamanlarda, birkaç düşük maliyetli biyosorbentler ağır metallerin uzaklaştırılması araştırmalarında kullanılmıştır. Bu çalışmada, pirinç kabuğu-biyosorbent-tarımsal atık değerlendirilerek bir kompozit malzeme hazırlandı. Yenilikçi bir teknoloji olan manyetik malzemeler; atık sulardaki koagülasyonu hızlandırmada, sütten radyonüklidlerin uzaklaştırılmasında, organik boyaların adsorbsiyonunda ve petrol tanker kazaları sonucu denize dökülen petrolün uzaklaştırılmasında kullanılmaktadır ve son yılların en ilgi çeken uygulamaları arasındadır. Manyetik kompozitler şu özellikleri göstermektedir: (i) Kil veya aktif karbon gibi adsorbentlerin adsorpsiyon özelliklerini ve Hematit'in manyetik özelliğini birleştirirler, (ii) farklı tipteki kontaminantların örneğin metal veya organik türlerin sudan uzaklaştırılmasında kullanılabilir, (iii)basit bir manyetik ayırma prosesi ile ortamdan kolaylıkla uzaklaştırılabilirler[4]. Nanokompozit malzemelerin genellikle yüksek performanslı santrifüj işlemleri ile ayrılması gerekir. Bu nanokompozitlerde karşılaşılan en önemli zorluktur çünkü hem zaman alıcıdır hem de pahalıdır ama nanokompozitleri manyetik ayırma ile ortamdan uzaklaştırılması kolay, etkili ve basittir. Son zamanlardaki literatür çalışmaları incelendiğinde Cs ve Sr adsorpsiyonunda bir çok adsorbent ve teknik kullanılmıştır. Bu çalışmada tarımsal bir atık olan pirinç kabuğundan elde edilen kül, hematit (Fe3O4) ile birleştirilerek nanokompozit bir malzeme sentezlendi ve sezyum ve stronsiyum adsorpsiyonunda kullanıldı. Literatürde pirinç kabuğu sulu radyoaktif atıklardan Cs uzaklaştırılmasında kullanılmış ancak külden hazırlanan herhangi bir kompozit malzeme sözü edilen analitlerin uzaklaştırılmasında kullanılmamıştır. Çalkalama (batch) yöntemi kullanılarak pH, sıcaklık, adsorbent miktarı, çalkalama süresi ve çalkalama hızı gibi adsorpsiyon parametrelerin adsorpsiyon üzerine etkileri araştırıldı. Optimum parametreler belirlendikten sonra Sr varlığındaki Cs adsorpsiyonun kapasitesi belirlendi. Süzüntüde kalan Cs ve Sr iyonlarının konsantrasyonları hava/asetilen alevinin kullanıldığı alevli atomik absorpsiyon spektrofotometresinde tayin edildi. SEM-EDX analizinden sonra, RHA-Fe3O4 adsorbentin partikül şeklinin düzenli olmadığı sonucuna varıldı. RHA- Fe3O4 oluşturmak üzere pirinç kabuğu külünün Fe3O4 ile muamelesi sonrası yüzey alanı pirinç kabuğunun yüzey alanının neredeyse iki katı kadar daha artmıştır. RHA-Fe3O4 yüzey alanı 156,34 m2/g'dır. XRF analizinden, RHA-Fe3O4 adsorbentinin Fe, Si, S, Sb ve Sn elementlerinden oluştuğu anlaşıldı ve sırasıyla yüzde miktarları 71,50, 18,93, 9,42, 0,08 ve 0,06 olarak belirlendi. Manyetik nanokompozit adsorbenti sentezlemek için önce pirinç kabuğu çift distile sui le toprak ve tozdan arındırılmak için yıkandı ve 76 saat boyunca 0.1 M HCl çözeltisinde saklandı sonar klorür iyonlarını uzaklaştırmak için üç kez çift distile sui le yıkandı ve 105 oC'de 2 saat kurutuldu. Kurutulmuş pirinç kabuğu kroze içerisine alındı ve 800 oC'de 5 saat fırında yakıldı. Bu işlemlerden sonar, 10 mL 2M FeSO4.7H2O ve 40 mL 1 M FeCl3 çözeltileri behere ilave edildi, 70 oC'ye kadar ısıtıldı ve 3,3 g pirinç kabuğu külü karıştırılarak behere ilave edildi. Hematit'i çöktürmek için 100 mL 5M NaOH çözelitisi damla damla ilave edildi. Çökelti çift distile sui le yıkandı ve mavi bantlı süzgeç kağıdı ile süzüldü. Sentezlenen siyah renkli manyetik kompozit 80 oC'de 2 saat fırında kurutuldu. pH, başlangıç konsantrasyonu, çalkalama süresi, adsorbent kütlesi ve sıcaklık gibi çeşitli değişkenlerin etkisi araştırıldı. Optimum parameter olarak pH:6, başlangıç konsantrasyonu 30 ppm, çalkalama süresi 30 dakika, adsorbent kütlesi 0,01 g ve sıcaklık 25 oC olarak belirlendi. Maksimum adsorpsiyon kapasitesi 28,82 mg Cs/g olarak bulundu. Denge adsorpsiyonu verileri Langmuir ve Freundlich izoterm modelleriyle açıklandı ve sonuçlar korrelasyon katsayısı 0,943 olan Langmuir modeline daha iyi uydu.
Özet (Çeviri)
Removal of pollutants from industrial wastewater has become one of the most important issues recently for the increase in industrial activities, especially for heavy metals and radionuclides.Radioactive wastes containing radionuclides have been considered as the most hazardous environmnetal pollutants. In recent years, with the development of nuclear technology and industry, much radioactive waste is released into water, which leads to a direct threat to human health. The main factors why they are so hazardous are containing long half-life radionuclides, high fission yields, high mobility of radionuclides in the atmosphere and easiliy joining the metabolism of living beings. Radioactive wastes are generated from nuclear power plants operation and their accidents, radioisotop production laboratories, nuclear fuel recyciling processes and univercities radiochemistry laboratories. Among the most common radionuclides are Cs-137 and Sr-60. Because of this, removal of these two radionuclides is very important. Nowadays, many different methods have been applied to remove Cs(+1) and Sr (+2) ions from aquaeous radioactive wastes. Most important methods are ion exchange, precipitation, adsorption, solvent extraction elctrochemical and membran processes. Among them, adsorption is most preferred method because of low cost, thermal stability, resistance toward ionization radiation and compatible with the final form of waste. The role of dead biomasses in the removal of heavy metal toxic ions received an increased attention during recent past as due to its fairly good exchange capacity, large abundance, and also cost effectiveness. However, scanty reports appeared for the possible application of dead biomasses in the removal of radiotoxic ions particularly the radiocesium and radiostrontium. Recently, several low cost biosorbents have been used to remove heavy metals in investigations. Biosorbent used in this study is rice husk which is a agricultural residue. An innovative technology that has gained attention is the use of magnetic materials to solve environmental problems, such as accelerating the coagulation of sewage, removing radionuclides from milk, adsorption of organic dyes and oil spill remediation. The advance in magnetic nanoparticles (MNP) has made it possible to utilize several advantages of using nanosized sorbent without typical difficulty associated with separation of nanoparticles from solution. MNP can be easily separated from the treated solution by simple application of either a permanent or electro magnet. Their uses have been proven very successful, particularly in the field of bio-nanotechnology, where MNP functionalized with various functional groups have been used in the isolation and purifications of DNAs, proteins, or drug delivery. Magnetic nanoparticles have also been used for treatment and recovery of several heavy metals and radioactive nuclides such as uranium and plutonium. These magnetic materials show the following features: (i) they combine the adsorption properties of adsorbent such as activated carbon or clay with the magnetic properties of iron oxides. (ii) they can be used to remove different types of contaminants for example metals or organics from water, (iii) they can be removed from the medium by a simple magnetic seperation process. Nanocomposite particules usually need to be seperated by high performance centrifugations, this is the most important challenge with nanocomposites because this process is time consuming and expensive but using magnetic separation to seperate nanocomposites from medium is easy, fast, efficient and simple. Recently, when the literature studies were investigated, many type of adsorbent and technique were used to remove Cs and Sr from aquaeous waste solutions. In this study, an agricultural residue rice husk was heated to form its ash then it combined with iron oxide to synthesis nonocomposite material which was used to remove Cs and Sr from aquaeus waste solutions. Using batch method, adsorption parameters such as pH, temperature, adsorbent mass, contact time and shaking rate and initial Cs concentration were determined. After determination of optimum parameters, in existance of Sr, Cs adsorption capacity has been determined. Cs and Sr ions concentrations in supernatant were determined using flame atomic absorption spectrometer equipped with hallow cathode lamp of Cs and Sr as a radiation source and air/acetylene burner for atomization. After SEM-EDX analysis, we concluded that particul shape of RHA-Fe3O4 adsorbent is not regular. The surface area is almost twice larger then Rice Husk's surface area after rice husk was treated with Fe3O4 to compose RHA- Fe3O4. The surface area of RHA- Fe2O3 is 156.34 m2/g. From XRF analysis, it can be seen that RHA- Fe3O4 is composed of Fe, Si, S, Sb and Sn elements. Their percentage amounts are 71.50, 18.93, 9.42, 0.08 ve 0.06 respectively. To synthesize magnetic nanoparticle adsorbent, after rice husk washed with double-distilled water to remove dusk and soil, it stored in 0.1 M HCl solution for 76 hours then washed three times to remove chloride ions and dried at 105 oC for 2 hours. Dried rice husk was burn in a crucible at 800 oC for 5 hours in an oven to obtain rice husk ash. After these process, 10 mL 2M FeSO4.7H2O and 40 mL 1M FeCl3 solution were added to 400 mL beaker, heated up to 70 oC then 3.3 g rice husk ash was added into this solution while stirring. To precipitate iron oxide, 100 mL 5M NaOH solution was added drop by drop. To understand that the composite is magnetic or not, an electro magnet was brought closer to beaker and composite in beaker was coagulated on the electro magnet side of the beaker. Precipitate was washed distilled-deionized water and filtered with blue banded filter paper. Synthesized black coloured magnetic composite was dried in an oven at 80 oC for 2 hours. Dried magnetic composite was grinded into powder form. The effect of different variables such as pH, initial concentration, shaking time, adsorbent mass and temperature was studied. Optimum parameters we concluded as pH:6, 30 ppm initial concentration, 30 minutes shaking time, 0.010 g adsorbent mass and 25oC temperature. Maximum adsorption capacity was found 28,82 mg Cs/g RHA-Fe3O4. The equilibrium sorption data were described by the Langmuir and Freundlich isotherm models and the results could fit more with Langmuir model with correlation coefficient 0.943. From literature studies, it can be seen that cesium adsorption capacities change between 0.011 mg Cs/g adsorbent and 1965 mg Cs/g adsorbent. Magnetic nanocomposite rice husk ash shows higher adsorption capacity from polyacrylonitrile-zeolite nanocomposite, hexacyanoferrate-polymer composite, wallnut-shell, bentonite supported polymer and magnetic zeolite nanocomposite adsorbent.
Benzer Tezler
- Mekanik olarak dayanıklı tek-, çift- ve üç-ağ yapılı fibroin kriyojellerinin sentezi ve karakterizasyonu
Synthesis and characterization of mechanically durable single-, double- and triple-network fibroin cryogels
BERKANT YETİŞKİN
- Gümüş içeren doğal kalsiyum karbonat nanokompoziti ile Cu(II) giderimi
Cu(II) removal by silver containing natural calcium carbonate nanocomposite
İLKNUR KOYUER
- Sulardan stronsiyum giderimi için yeni tip nanobiyokompozitlerin geliştirilmesi ve adsorpsiyon özelliklerinin incelenmesi
Development of new types of nanobiocomposites for removal of strontium from aqueous solutions and investigations of absorption properties
BÜŞRA PRILL
Yüksek Lisans
Türkçe
2021
Bilim ve TeknolojiEge ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. SABRİYE YUŞAN
- Fabrication and characterization of support layer for thin film nanocomposite desalination membranes
İnce film nanokompozit desalinasyon membranları için destek tabakası üretimi ve karakterizasyonu
KADER ÖZGÜR
Yüksek Lisans
İngilizce
2016
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. MEHMET GÖKTUĞ AHUNBAY
- Synthesis of aluminium oxide nanoparticles and iron based magnetic aluminium oxide nanocomposites by solution combustion method and applications
Alüminyum oksit nanopartiküllerin ve demir bazlı manyetik alüminyum oksit nanokompozitlerin çözelti yakma metodu ile sentezi ve uygulamaları
MERVE PEHLİVAN
Yüksek Lisans
İngilizce
2018
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. BELMA ÖZBEK
PROF. DR. SUNULLAH ÖZBEK