Geri Dön

Evolution of state in a titanium matrix composite under biaxial tension at high temperature

Başlık çevirisi mevcut değil.

  1. Tez No: 400623
  2. Yazar: ÖMER FATİH YALÇIN
  3. Danışmanlar: PROF. CLIFF J. LISSENDEN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mühendislik Bilimleri, Mechanical Engineering, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1999
  8. Dil: İngilizce
  9. Üniversite: The Pennsylvania State University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 81

Özet

Özet yok.

Özet (Çeviri)

The response of a titanium matrix composite to biaxial stress state at high temperature is predicted by using the finite element method. The titanium matrix exhibits elastic-viscoplastic response represented by a generalized viscoplastic potential structure (GVIPS) model. The fiber is considered to be linear elastic. A nonlinear interfacial traction-displacement model is used to represent the fiber/matrix interface debotiding and matrix cracking. A micromechanics approach is used to predict overall composite response, in which the composite is represented by a repeating unit cell for a variety of different microstructurai architectures. Finite element analyses were performed using the ABAQUS commercial finite element program. A user defined material subroutine was developed for ABAQUS to implement the elastic-viscoplastic matrix model. Also, the fiber/matrix interface debonding and matrix cracking was implemented by a user defined element subroutine. The response of five different microstructurai architectures to transverse tension and biaxial tension at elevated temperatures is demonstrated. In these five architectures, the rectangular array with aspect ratio=0.5 found the strongest microstructure. Contribution of J3, third invariant of the effective deviatoric stress tensor, to composite response is examined to some extent because of some numerical problems.

Benzer Tezler

  1. B4C esaslı kompozitlerin B4C/Me başlangıç tozlarından hareketle spark plazma sinterleme (SPS) yöntemi ile üretilmesi ve karakterizasyonu

    Production and characterization of B4C based composites from B4C/Me starting powders by using spark plasma sintering (SPS) method

    MERAL CENGİZ

    Doktora

    Türkçe

    Türkçe

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. FİLİZ ŞAHİN

  2. Grafen ve bor nitrür katkılarının titanyum diborür – titanyum karbür kompozitlerinin özellikleri üzerine etkilerinin incelenmesi

    Investigation of the effects of graphene and boron nitride additives on the properties of titanium diboride – titanium carbide composites

    BESTE ECEM KAYAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. İPEK AKIN KARADAYI

  3. Toz metalurjisi yöntemleriyle geliştirilen 9OW7N;3Fe ağır alaşımlarının sıvı faz sinterlemesi süreçleriyle üretilmesi ve karakterizasyonu

    Liquid phase sintering processes and characterization of 9OW-7N-3Fe heavy alloys developed by P/M methods

    TUNCAY ŞULAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1993

    Meteorolojiİstanbul Teknik Üniversitesi

    DOÇ.DR. M. LÜTFİ ÖVEÇOĞLU

  4. Tavşan tibiasında deneysel olarak oluşturulan periimplantal kemik defektlerinin rejenerasyonunda titanyum tüplerde hazırlanan trombositten zengin fibrinin etkinliğinin araştırılması

    To investigate the effect of bone regeneration titanium prepared platelet rich fibrin treated experimentally induced peri-implant osseous defects at rabit tibia

    TURAN EMRE KUZU

    Doktora

    Türkçe

    Türkçe

    2015

    Diş HekimliğiCumhuriyet Üniversitesi

    Periodontoloji Ana Bilim Dalı

    YRD. DOÇ. DR. HAKAN ÖZDEMİR

  5. AISI 304 ve 430 kalite paslanmaz çeliklerin mikroyapılarına, mekanik özelliklerine ve korozyon davranışlarına soğuk deformasyonun etkileri

    The effects of cold deformation on the microstructures, mechanical properties and corrosion behaviours of AISI 304 and 430 grade stainless steels

    TAHİR OSMANOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. M. KELAMİ ŞEŞEN