Geri Dön

Functionally graded scaffolds for the engineering of interface tissues using hybrid twin screw extrusion/electrospinning technology

Başlık çevirisi mevcut değil.

  1. Tez No: 400751
  2. Yazar: CEVAT ERİŞKEN
  3. Danışmanlar: PROF. DİLHAN M. KALYON, PROF. HONGJUN WANG
  4. Tez Türü: Doktora
  5. Konular: Mühendislik Bilimleri, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2008
  8. Dil: İngilizce
  9. Üniversite: Stevens Institute of Technology
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 219

Özet

Özet yok.

Özet (Çeviri)

Tissue engineering is the application of the principles of engineering and life sciences for the development of biological alternatives for improvement or regeneration of native tissues. Native tissues are complex structures with functions and properties changing spatially and temporally, and engineering of such structures requires functionally graded scaffolds with composition and properties changing systematically along various directions. Utilization of a new hybrid technology integrating the controlled feeding, compounding, dispersion, deaeration, and pressurization capabilities of extrusion process with electrospinning allows incorporation of liquids and solid particles/nanoparticles into polymeric fibers/nanofibers for fabrication of functionally graded non-woven meshes to be used as scaffolds in engineering of tissues. The capabilities of the hybrid technology were demonstrated with a series of scaffold fabrication and cell culturing studies along with characterization of biomechanical properties. In the first study, the hybrid technology was employed to generate concentration gradations of ß-tricalcium phosphate (ß-TCP) nanoparticles in a polycaprolactone (PCL) binder, between two surfaces of nanofibrous scaffolds. These scaffolds were seeded with pre-osteoblastic cell line (MC3T3-E1) to attempt to engineer cartilage-bone interface, and after four weeks, the tissue constructs revealed formation of continuous gradations in extracellular matrix akin to cartilage-bone interface in terms of distributions of mineral concentrations and biomechanical properties. In a second demonstration of the hybrid technology, graded differentiation of stem cells was attempted by using insulin, a known stimulator of chondrogenic differentiation, and ß-glycerol phosphate (ß-GP), for mineralization. Concentrations of insulin and ß-GP in PCL were controlled to monotonically increase and decrease, respectively, along the length of scaffolds, which were then seeded with adipose derived stromal cells (h-ADSCs). Analysis of resulting tissue constructs revealed chondrocytic differentiation of h-ADSCs, with both the chondrocytic cell concentration and mineralization varying as a function of distributions of concentrations of insulin and ß-GP, respectively. The investigation also covered characterization of biomechanical properties of native bovine osteochondral tissue samples, which were then compared with biomechanical properties of tissue constructs at different stages of development. The hybrid technology developed in this thesis should provide another enabling platform for the fabrication of functionally graded scaffolds that aim to mimic the elegant gradations found in myriad native tissues.

Benzer Tezler

  1. Gelatin nanoparticle loaded polycaprolactone-nanohydroxyapatite functionally graded scaffolds

    Jelatin nanoparçacık yüklü polikaprolakton-nanohidroksiapatit fonksiyonel olarak kademeli iskeleler

    ÖZLEM ARAÇ

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    BiyomühendislikSabancı Üniversitesi

    Malzeme Bilimi ve Nanomühendislik Ana Bilim Dalı

    DOÇ. DR. GÜLLÜ KIZILTAŞ ŞENDUR

  2. Farklı hammaddeler kullanılarak kalsiyum silikat doku iskelesi üretimi

    Production of calcium silicate tissue scaffold using different raw materials

    ÜMMÜGÜLSÜM ELMALI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    BiyoteknolojiSelçuk Üniversitesi

    Biyoteknoloji Ana Bilim Dalı

    DOÇ. DR. GÜLSÜM AYDIN

    DOÇ. DR. AYŞE KALEMTAŞ

  3. Fonksiyonel derecelendirilmiş hibrid kafes yapılarının femoral bileşene uygulanabilirliğinin araştırılması

    Investigation of applicability functionally graded hybrid scaffold structures on femoral component

    ENDER EMİR

    Doktora

    Türkçe

    Türkçe

    2022

    Makine Mühendisliğiİnönü Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ERKAN BAHÇE

  4. EGF ile biyosinyallenmiş jelatin doku iskelesi üzerinde RHBMP 7 kontrollü salınımı ile kıkırdak doku rejenerasyonu

    The cartilage tissue regeneration- biosignalized gelatin with EGF on tissue scaffold with controlled release of RHBMP7

    BİLGEHAN İLKER

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2015

    Plastik ve Rekonstrüktif CerrahiDokuz Eylül Üniversitesi

    Plastik ve Rekonstrüktif Cerrahi Ana Bilim Dalı

    PROF. DR. HALUK VAYVADA

  5. Analysis of PCL based functionally gradient bone scaffolds fabricated using NIPS based 3D printing

    NIPS tabanlı 3B baskı kullanılarak üretilen PCL tabanlı fonksiyonel gradyent kemik iskelelerinin analizi

    HATİCE KÜBRA BİLGİLİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    BiyomühendislikSabancı Üniversitesi

    Malzeme Bilimi ve Nanomühendislik Ana Bilim Dalı

    DOÇ. DR. GÜLLÜ KIZILTAŞ ŞENDUR