Geri Dön

Behavior of piezoelectric wafer active sensor in various media

Başlık çevirisi mevcut değil.

  1. Tez No: 402023
  2. Yazar: TUNCAY KAMAŞ
  3. Danışmanlar: PROF. VICTOR GIURGIUTIU
  4. Tez Türü: Doktora
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2014
  8. Dil: İngilizce
  9. Üniversite: Clemson University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 368

Özet

Özet yok.

Özet (Çeviri)

The dissertation addresses structural health monitoring (SHM) techniques using ultrasonic waves generated by piezoelectric wafer active sensors (PWAS) with an emphasis on the development of theoretical models of standing harmonic waves and guided waves. The focal objective of the research is to extend the theoretical study of electro-mechanical coupled PWAS as a resonator/transducer that interacts with standing and traveling waves in various media through electro-mechanical impedance spectroscopy (EMIS) method and guided wave propagation. The analytical models are developed and the coupled field finite element analysis (CF-FEA) models are simulated and verified with experiments. The dissertation is divided into two parts with respect to the developments in EMIS methods and GWP methods. In the first part, analytical and finite element models have been developed for the simulation of PWAS-EMIS in in-plane (longitudinal) and out-of-plane (thickness) mode. Temperature effects on free PWAS-EMIS are also discussed with respect to the in-plane mode. Piezoelectric material degradation on certain electrical and mechanical properties as the temperature increases is simulated by our analytical model for in-plane circular PWAS-EMIS that agrees well with the sets of experiments. Then the thickness mode PWAS-EMIS model was further developed for a PWAS resonator bonded on a plate-like structure. The latter analytical model was to determine the resonance frequencies for the normal mode expansion method through the global matrix method by considering PWAS-substrate and proof mass-PWAS-substrate models. The proof mass concept was adapted to shift the systems resonance frequencies in thickness mode. PWAS in contact with liquid medium on one of its surface has been analytically modeled and simulated the electro-mechanical response of PWAS with various liquids with different material properties such as the density and the viscosity. The second part discusses the guided wave propagation in elastic structures. The feature guided waves in thick structures and in high frequency range are discussed considering weld guided quasi-Rayleigh waves. Furthermore, the weld guided quasi Rayleigh waves and their interaction with damages in thick plates and thick walled pipes are examined by the finite element models and experiments. The dissertation finishes with a summary of contributions followed by conclusions, and suggestions for future work.

Benzer Tezler

  1. Piezoelektik etki ile titreşim yapan delikli yüzey üzerine yerleştirilmiş sıvı damlanın dinamik davranışının incelenmesi

    Investigation of the dynamic behavior of a liquid droplet placed on a vibrating perforated surface via the piezoelectric effect

    ÜMÜ GÜLSÜM BİLEKLİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Makine MühendisliğiManisa Celal Bayar Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÖZDE SARI

  2. Yüksek frekansla titreşim yapan hidrofobik ve gözenekli yüzey üzerine yerleştirilmiş su damlasının analizi

    Analysis of water drop placed on hydrophobic and porous surface that vibrates high frequency

    MEHMET BARTU GÖL

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Makine MühendisliğiManisa Celal Bayar Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÖZDE SARI

  3. Lityum ve tantalyum katkılı sodyum potasyum niobat piezoseramiklerinin spark plazma sinterleme ile üretimi ve karakterizasyonu

    Production and characterization of lithium and tantalum added potassium sodium niobate piezoceramics via spark plasma sintering

    MEHMET KAHRAMAN ÖZMEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜLTEKİN GÖLLER

  4. Synthesis and applications of amphiphilic graft copolymers

    Amfifilik aşı kopolimerlerin sentezi ve uygulamaları

    GÖZDE AKTAŞ EKEN

    Doktora

    İngilizce

    İngilizce

    2019

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. METİN HAYRİ ACAR

  5. Piezoelektrik etki ile sentetik jet teknolojisi kullanılarak atomizör tasarımı ve analizi

    Piezoelektrik etki ile sentetik jet teknolojisi kullanilarak atomizör tasarimi ve analizi

    OKAN BİÇİM

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mühendislik BilimleriManisa Celal Bayar Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GOZDE DEGER SARI