Le fort l osteotomisi ile maksiller advancement operasyonunda değişik sayıda ve şekildeki plaklarla fiksasyonun biyomekaniğinin sonlu elemanlar analizi metodu ile karşılaştırılması
Comparison of biomechanic of veried plate fixation following le fort l osteotomy with maxillar advancement by finite element analysis
- Tez No: 417251
- Danışmanlar: DOÇ. DR. AYŞEGÜL MİNE TÜZÜNER ÖNCÜL
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Ağız Diş ve Çene Cerrahisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 149
Özet
Maksiller deformiteler üç farklı düzlemde de oluşabilir. Cerrahi prosedür her hastaya özgün şekilde planlandığı gibi Le Fort I osteotomisi ile maksilla superior, inferior, anterior, posterior yada transvers doğrultuda tek veya birden çok segment halinde hareket ettirilebilir. Ortognatik cerrahi sonrası segmentlerin stabilizasyonunu sağlamak için titanyum miniplak-vida sistemleri kullanılan rijit internal fiksasyon tercih edilmektedir. Sonlu elemanlar analizi, karmaşık geometriye sahip yapılarda özellikle canlı doku ve organlarda meydana gelen gerilme stresi, sıkışma stresi ve yer değiştirmelerin hassas bir şekilde incelenmesine olanak sağlayan matematiksel bir yöntemdir. Bu çalışmada değişik fiksasyonlardaki stres dağılımları ve optimal miniplak kullanımını belirleyebilmek için L ve Le Fort plaklarından oluşan 2'li ve 4'lü plak sistemlerinin kullanıldığı bilgisayar modelleri oluşturularak üç boyutlu sonlu elemanlar analizi yöntemi ile karşılaştırılmıştır. Analizler neticesinde en yüksek relatif deplasman miktarlarının, Pmin ve Von Mises streslerinin 2 Le Fort plağı kullanılan modelde, en yüksek Pmax streslerinin ise 2 L plağı kullanılan modelde oluştuğu görülmüştür. Le Fort I osteotomisi ile maksiller advancement operasyonlarında yapılan fiksasyonlarda 4'lü plak sistemleri kullanmanın daha güvenilir bir yöntem olduğu ortaya çıkmıştır. 2'li plak sistemleri kullanılacaksa L plak yerine Le Fort plağı kullanmanın nispetten daha iyi olduğu, 4'lü plak sistemlerinde ise L ve Le Fort plağı kullanılması arasında anlamlı bir fark oluşmadığı görülmüştür.
Özet (Çeviri)
Maxillary deformities can occur in three different planes.The surgical procedure is planned in unique form for each patient and by Le Fort I osteotomy, maxilla can be moved in one or more segments on superior, inferior, anterior, posterior or transverse direction. After orthognathic surgery, to ensure the stability of the segments; rigid internal fixation with titanium miniplate-screw systems is preferred. Finite Element Analysis is a mathematical method which allows to reveal tensile stress, compressive stress, and displacements especially occurring in living tissues and organs of structures which have complex geometries. In this study, to determine the optimal stress distribution and miniplate utilization in different fixations, computer models were created consisting dual and quad plate systems made of L and Le Forte plates. And they were compared with the three-dimensional Finite Element Analysis method. In the analysis results the highest relative amount of displacement, Pmin and Von Mises stresses were observed in models with 2 Le Forte plates and the highest Pmax stresses were observed in models with 2 L plates. Usage of quad-plate systems proved to be a more reliable method for the fixation process of Le Fort I osteotomy with maxillary advancement procedure. It was seen that; if dual-plate systems are to be used, it is relatively better to use Le Forte plates instead of L plates, and in quad-plate systems no significant differences were seen between Le Forte and L plates.
Benzer Tezler
- Ortognatik cerrahi uygulanan hastaların retrospektif değerlendirilmesi, komplikasyonların ve iskeletsel relapsların analizi
Retrospective evaluation of patients who underwent orthognathic surgery,analysis of complications and skeletal relapses
LÜTFİ TUGAY SEKÜÇOĞLU
Tıpta Uzmanlık
Türkçe
2006
Plastik ve Rekonstrüktif CerrahiÇukurova ÜniversitesiPlastik ve Rekonstrüktif Cerrahi Ana Bilim Dalı
PROF.DR. SABRİ ACARTÜRK
- Le fort I ilerletme osteotomi fiksasyonunda titanyum ve karbon fiberle güçlendirilmiş polietereterketon mini plakların stres dağılımlarının sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of stress distributions of titanium and carbon fiber reinforced polyetheretherketone mini plates in Le fort I advancement osteotomy fixation using finite element analysis
KÜBRA YAKUT
Diş Hekimliği Uzmanlık
Türkçe
2024
Diş Hekimliğiİnönü ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SEZAİ ÇİFTÇİ
- Farklı le fort ı osteotomi yöntemleriyle yapılan maksiller ilerletme yöntemlerinin stabilitelerinin karşılaştırılması
Comparison of the stability of different le fort i osteotomy technics on maxillary advancement methods
GİZEM ALAGÖZ KABAY
Doktora
Türkçe
2019
Diş HekimliğiBezm-i Alem Vakıf ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. ERDEM KILIÇ
- Çok parçalı le fort I osteotomileri ile oluşturulan kemik segmentlerinde ve titanyum fiksasyon sistemlerinde çiğneme kuvvetleri altında meydana gelen stres dağılımının üç boyutlu sonlu eleman analizi ile incelenmesi
Three dimensional finite element analysis of the stress distribution under the force of mastication over the bone segments and the titanium fixation systems formed by the multiple piece le fort i osteotomy
DENİZ BAYRAMOĞLU SÜRMELİOĞLU
Diş Hekimliği Uzmanlık
Türkçe
2016
Diş HekimliğiKocaeli ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
YRD. DOÇ. DR. BAHADIR KAN
- Hayvansal kaynaklı greft materyalinin (Bioteck®S.R.L. Osteoplant®-Flex System) ortognatik cerrahinin stabilitesi üzerine etkisi
Influence of animal origin bone graft material (Bioteck®S.R.L. Osteoplant®-Flex System) on the stability of orthognatgic surgery
UFUK KÜÇÜK
Tıpta Uzmanlık
Türkçe
2008
Plastik ve Rekonstrüktif CerrahiÇukurova ÜniversitesiPlastik ve Rekonstrüktif Cerrahi Ana Bilim Dalı
PROF. CEMİL DALAY