Termoset/kil nanokompozitlerin tiyol-epoksi click kimyasıyla hazırlanması
Preparation of thermoset/clay nanocomposites by thiol-epoxy click chemistry
- Tez No: 425771
- Danışmanlar: DOÇ. DR. MEHMET ATİLLA TAŞDELEN
- Tez Türü: Yüksek Lisans
- Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: Türkçe
- Üniversite: Yalova Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Polimer Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 64
Özet
Nanokompozit malzemelerin kullanımı, üstün optik, termal, elektronik, fotonik, manyetik, reolojik, yapısal ve mekanik niteliklerinden dolayı her geçen gün artmaktadır. Plastik sektöründe büyük paya sahip olan, otomotiv, kaplama, biyomedikal ve paketleme sanayileri en önemli kullanım alanlarıdır. Genel bir tanımla; iki veya daha fazla malzemenin, iyi özelliklerini bir araya toplamak ya da ortaya yeni bir özellik çıkarmak için, mikro veya makro seviyede heterojen karışımıyla oluşan malzemeye kompozit malzeme denir. Nanokompozitler, sürekli bir polimer matris içerisine dağılmış en az bir boyutu 100 nanometreden küçük olan parçacıkları içeren heterofazlı kompozit yapılardır.“Click”kimyası tepkimeleri yüksek verimli, hızlı, yüksek seçicilikli, çeşitli tepkime koşullarında gerçekleştirilmesi, birçok fonksiyonel gruplara uyumlu ve etkisiz ya da hiç yan ürün vermemesi yönüyle büyük ilgi çekmektedir.“Click”kimyası tepkimeleri son yıllarda polimer kil/nanokompozitlerin hazırlanmasında sıklıkla kullanılmaktadır. Tiyol ile epoksitler arasında gerçekleşen tepkimede özellikle hızlı ve yüksek verimle gerçekleşmesinden dolayı“Click”kimyası tepkimesi olarak tanımlanmaktadır. Bu noktadan hareketle, Tiyol-epoksi“Click”kimyası tepkimesi kullanımı, istenilen özelliklere sahip termoset/kil nanokompozit malzemelerin hazırlanmasında son derece etkin bir yöntem olmuştur. Elde edilen tabakalı nanokompozit malzemelerin yapısı kil ihtiva eden ve etmeyenleri termal özellikleri termogravimetrik analiz yöntemiyle incelendiğinde saf polimerlere göre nanokompozitler daha üstün özellikler göstermiştir. Son olarakta killerin termoset matrisinde dağılımı XRD spektroskopisyle incelendiğinde tamamen dağılmış (eksfoliye) ve arası açılmış (interkale) kil yapıları gözlemlenmiştir.
Özet (Çeviri)
The use of nanocomposite materials is increasing every day due to their excellent optical, thermal and mechanical properties. Polymer/clay nanocomposites are one kind of composite materials containing of nanometer-sized inorganic nanoparticles, typically in the range of 1–100 nm, which are uniformly dispersed in and fixed to a polymer matrix. The inclusion of inorganic nanoparticles into a polymer matrix not only combines their properties but also brings advanced new functions that find applications in many industrial fields. Polymer/clay nanocomposites find a number of different industrial applications including automotive, coatings, biomedical and packaging industries. Polymer/clay nanocomposite materials, in which nano-sized silicate plates of clay are uniformly dispersed in the polymer matrix, exhibit superior physical properties such as high dimensional stability, gas barrier performance, flame retardancy, and mechanical strength that cannot be achieved by pure polymer or conventional composites (micro- and macro composites). However, the dispersion of clay as individual platelets throughout the polymer is difficult to achieve due to strong van der Waals forces holding platelets together in conjunction with the incompatibility of the hydrophilic clay with the organophilic (hydrophobic) polymer matrix, giving way to clay agglomeration. Thus, the surface of the clays is commonly modified with a cation exchange technique to expand basal spacing and make the layered silicate compatible with polymer matrixes. Currently polymer/clay nanocomposites can be prepared by three ways such as solution mixing, melt blending, and in-situ polymerization. In the solution mixing method, the polymer is dissolved in an organic solvent, then the clay is dispersed in the obtained solution and subsequently either the solvent is evaporated or the polymer precipitated. However, the large quantities of volatile solvent necessary for this approach make it less attractive as an industrial process. Melt blending is a solvent-free method to enable mixing of the layered silicate with the polymer matrix in the molten state. However, very careful attention has to be paid to finely tune the processing conditions to increase the compatibility of clay layer surfaces with the polymer matrix. In the in-situ polymerization technique, the monomer, together with the initiator and/or catalyst, is intercalated within the silicate layers and the polymerization is initiated by external stimulation such as thermal, photochemical or chemical activation. The chain growth in the clay galleries triggers the clay exfoliation and hence the nanocomposite formation. Recently, a highly efficient copper (I) catalyzed azide/alkyne cycloaddition“click”reaction, in which exfoliation is rooted in the functional groups of the intercalant that readily react with the antagonist groups of the preformed polymers has been developed. The quantitative efficiency of click reaction coupled with tolerance to a wide variety of functional groups and reaction conditions make this process highly attractive for the nanocomposite preparation. Another important example of click chemistry reaction is thiol-epoxy coupling reaction, which can be conducted from commercial available and cheap epoxide and thiol compounds under ambient conditions. This chemistry is an efficient and simple tool for the synthesis of various polymers and produces a reactive secondary hydroxyl functionality that can be further utilized in another reactions. Here, we report the synthesis of thermoset/clay nanocomposites by thiol-epoxy click reaction. This approach is conceived to greatly extend the synthetic capabilities of polymer/clay nanocomposites by careful choices of organic clays and polymers, and the optimization of the synthesizing process to deliver the biggest benefit.
Benzer Tezler
- Viscoelastic characteristics of epoxy- montmorillonite nanocomposites
Epoksi-montmorillonit nanokompozitlerinin viskoelastik özellikleri
EVREN SAPMAZ
Yüksek Lisans
İngilizce
2003
Kimya MühendisliğiOrta Doğu Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. ÜLKÜ YILMAZER
- Investigation of physical and mechanical properties of polyurethane nanocomposites prepared using different types of nano additives
Farklı nano katkılar ile hazırlanan poliüretan nanokompozitlerinin fiziksel ve mekanik özelliklerinin incelenmesi
BAHAR BÜYÜKKAHRAMAN
Yüksek Lisans
İngilizce
2014
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NURSELİ UYANIK
- New synthetic methodologies for benzoxazine based thermosets
Benzoksazin termosetleri için yeni sentez yöntemleri
KÜBRA DEMİR
- Production and characterization of resol type phenolic resin/layered silicate nanocomposites
Resol tipi fenolik reçine/katmanlı silikat nanokompozitlerin üretimi ve karakterizasyonu
CEMAL CEM TAŞAN
Yüksek Lisans
İngilizce
2005
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. CEVDET KAYNAK
- Stiren-etilen/butilen-stiren blok kopolimeri esaslı nanokompozitlerin hazırlanması ve modifikasyonu
Preparation and modification of nanocomposites based on styrene-ethylene/butylene-styrene block copolymer
TAHSİN ÇAĞLAYAN
Doktora
Türkçe
2019
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. OLGUN GÜVEN