Combustion yöntemi ile karışık metal oksit nano-parçacıkların sentezi, karakterizasyonu ve reaktif metilen mavisinin sulu çözeltiden uzaklaştırılmasında bu oksitlerin adsorbent özelliğinin incelenmesi
Synthesis of mixed metal oxide nano-particles with combustion method investigation of adsorbent properties of these oxides for the removal of methylene blue from aqueous solution
- Tez No: 456463
- Danışmanlar: PROF. DR. HÜSEYİN KÖKSAL
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Kahramanmaraş Sütçü İmam Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 196
Özet
Bu tez çalışmasında, yapısında üç metal bulunan nanoyapılar düşük sıcaklık combustion yöntemi ile sentezlendi. Deneysel çalışmalarda 4-amino-2,3-dimetil-1-fenil-3-pirazolin-5-on yakıt olarak kullanıldı. Nano oksitlerin morfolojisi (şekli), tanecik büyüklüğü ve nanoyapısı SEM, XRD, FTIR ve Uv-Vis spektrumları ile analiz edildi. Ön kompleksleşme oluşumunu takiben, düşük sıcaklık combustion (Yakma) yönteminden sonra, nano-parçacıklar 800 ºC'de kalsinasyonla elde edildi. Nano-parçacıkların ortalama büyüklükleri 100 nm'den küçüktür. XRD, FTIR ve SEM, EDX ve Uv-Vis spektrum sonuçları nano-pigmentlerin oluşumunu göstermektedir. Sentez sonuçlarından teorik olarak beklendiği gibi Ru, Fe, Co, Ni, Cu, Pd, Zn, Mn, In ve Al elementleri EDX spektrumlarında gözlenmektedir. Yüzey örtücülüğünde kullanılan ve yük etkilerini yok etmek amaçlı kullanılan altın EDX spektumlarında gözlendi. Öte yandan, nano-oksitlerde C, N, S, P, Cl, vb. elementlere rastlanmayışı, sentezlenen nanoparçacıkların saf yapıda olduğunu göstermektedir. Bu nano-parçacıkların bir tekstil boyası olan Metilen Mavisini adsorplama özelliği incelendi.
Özet (Çeviri)
In this thesis, three metal composed of nano-structures have been synthesized by low temperature combustion method. In this study, 4-amino-2,3-dimethyl-1-phenyl-3-pyrazolin-5-one used as thefuel. The morphology (shape), particle size and nano-structure were analyzed by using XRD, SEM, FTIR and Uv-Vis spectra. With low temperature combustion method following formation of precursor complexes has yielded nanoparticles at calcined temperature, 800 ºC. The mean grain size of the nanoparticles less than 100 nm. The XRD, SEM, EDX, FTIR and Uv-Vis spectra of the synthesized nanoparticles show that the formation of nano-pigments. The EDX analysis indicated that the elements of Ru, Fe, Co, Ni, Cu, Pd, Zn, Mn, In and Al existed in the products. The surface treatment of spray gold for elimination of charged effects were responsible for the signals of gold in the EDX analysis of the products. In other words, no impurities like C, N, S, P, Cl, etc. Were detected except for Ru, Co, Cu, Ni, Pd, Fe, In and Al elements, indicating the nanoparticles were pure. The adsorption feature of these nano-pigments was studied on a textile dye Methylene Blue.
Benzer Tezler
- Investigating the hydrothermal process parameters' effect on the mxoy (M: Ni, Mn, Co) powder properties and evaluating their performances when used as anodes for lithium ion batteries
Mxoy (M: Ni, Mn, Co) toz özellikleri üzerine hidrotermal proses parametrelerinin etkisinin incelenmesi ve lityum iyon bataryalarda anot olarak performanslarının değerlendirilmesi
REYHAN SOLMAZ ERGUN
Yüksek Lisans
İngilizce
2018
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ÖZGÜL KELEŞ
DR. ÖĞR. ÜYESİ BİLLUR DENİZ KARAHAN
- Çözelti yanma senteziyle üretilen vanadyum oksitlerin ince film kaplanması ve optik ve elektrokimyasal karakterizasyonu
Thin film coating of vanadium oxides produced by solution combustion synthesis its optical and electrochemical characterization
ESMA YILMAZ
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MEHMET ŞEREF SÖNMEZ
- Recovery and optimization of nano-materials used in catalytic converters
Katalitik konvertörlerde kullanılan nano-materyallerin geri kazanımı ve optimizasyonu
KADİR KIRAN
Yüksek Lisans
İngilizce
2019
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. FİGEN KADIRGAN
- Kendiliğinden ilerleyen yüksek sıcaklık sentezi yöntemi ile yeni ve özel alaşımların üretimi ve geliştirilmesi
Investigation of new and noble alloys productions by self-propagating high-temperature synthesis method
MURAT ALKAN
Doktora
Türkçe
2014
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ONURALP YÜCEL
DOÇ. DR. CEVAT BORA DERİN
- Gaz ayırma için polimid karışık matris membranların geliştirilmesi
Development of polymid mixed matrix membranes for gas separation
ELTAJ FARRUKHZADE
Yüksek Lisans
Türkçe
2020
Kimya Mühendisliğiİstanbul Üniversitesi-CerrahpaşaKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHTAP ŞAFAK BOROĞLU