3-D crustal structure of the Simav-Kutahya and surrounding regions
Simav-Kütahya ve çevresinin 3 boyutlu kabuk yapısının belirlenmesi
- Tez No: 461771
- Danışmanlar: YRD. DOÇ. DR. ALİ ÖZGÜN KONCA
- Tez Türü: Yüksek Lisans
- Konular: Jeofizik Mühendisliği, Geophysics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Kandilli Rasathanesi ve Deprem Araştırma Enstitüsü
- Ana Bilim Dalı: Jeofizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 117
Özet
Kütahya ve civarı tektonik ve jeolojik açıdan açıdan oldukça karmaşık bir yapıya sahiptir. Simav'da 19 Mayıs 2011'de M=5.9 büyüklüğünde bir deprem meydana gelmiştir. Bu tezin amacı, 2010 – 2015 yılları arasında Kütahya Simav bölgesi ve çevresinde meydana gelen depremleri kullanarak, yerel deprem tomografisi yöntemi ile bölgenin 3-B sismik hız yapısının belirlenmesidir. Bu çalışmanın önemi Simav, Kütahya ve çevresi için yapılmış olan ilk 3-B tomografi çalışmasıdır. Bu bağlamda bölgenin 1-B hız modeli, 3-B hız modeli ve kabuk yapısı elde edilmiştir. Bu çalışmada, çalışma bölgesinin 30 km derinliğe kadar olan üst kabuğuna ait 3-boyutlu sismik hız dağılımı, tomografik ters çözüm yöntemleri ile belirlenmiştir. Bu amaçla, önce veri setleri oluşturularak fazlara ait seyahat zamanlarının tomografik ters çözüm formatında hazırlanması, uygun model yapısının oluşturulması, uygun çözüm parametreleri ile tomografik ters çözüm işlemlerinin yapılmıştır. Aynı zamanda elde edilen Vp, Vs ve Vp/Vs modellerinin, bölgenin jeolojik ve tektonik özellikleri ile birlikte yorumlanması, tez kapsamında uygulanmıştır. Bu çalışma sonucunda, Kütahya Simav bölgesi ve civarının 30 km'ye kadar olan P ve S dalga hızı yapısı ve Vp/Vs oranları elde edilmiştir. Elde edilen hız kesitleri ile bölgenin graben sistemi desteklenmiştir. Grabenin yaklaşık derinliği 20 km olarak belirlenmiştir. Bölgede kaydedilen depremlerin odakları ile Vp, Vs ve Vp/Vs anomalileri arasındaki ilişki alınan derinlik kesitleri ile ortaya konmuştur. Bölgeye ait P- dalga hızı, S- dalga hızı bilgisi bölgenin yapısal farklılıkları hakkında, Vp/Vs oranı bilgisi ise kayaçların fiziksel özellikleri hakkında yorum yapılabilmesini sağlamıştır. Bölgeye ait fay sistemleri, olası fay zonları ve depremsellik çalışma sonuçları ile birleştirilerek tartışılmıştır.
Özet (Çeviri)
Kütahya and surroundings are quite complex structures from a tectonic and geological perspective. On May 19, 2011, an earthquake of magnitude M = 5.9 occurred in Simav. The purpose of this thesis is determination of the 3-D seismic velocity structure applying the local earthquake tomography method, using earthquakes that occurred between the years 2010 and 2015 in Kütahya Simav and surroundings. The signifigance of this study is that the first 1-D and 3-D tomographic inversion for Simav, Kütahya and surroundings is done by this study. The region's 1-D velocity model, 3-D velocity model and crustal structure are obtained. In this study, the 3-D velocity distribution up to 30 km depth of upper crust of the study area is determined with tomographic inversion methods. For this purpose, by creating data sets, travel time of phases were prepared by tomographic inversion format, appropriate model structure has been created, Vp, Vs and Vp/Vs models that obtained with appropriate resolution parameters and tomographic inversion, has been interpreted with geological and tectonic features of the area. At 30 km depth, P and S waves velocity structure of Kütahya, Simav and surroundings were obtained. The Graben system of the region is supported by the velocity cross-section obtained. The depth of the graben is determined as 20 km. The relationship between the hypocentre of the recorded earthquakes in the region and Vp, Vs, and Vp/Vs anomalies has been revealed with horizontal and vertical cross-sections. Comments are made about the structural differences of the region's P wave and S wave velocity information and the physical properties of the rock's Vp/Vs ratio information. Fault systems, potential fault zones and earthquake activity of the region are discussed with the combined results of the study.
Benzer Tezler
- Isparta büklümünü oluşturan tektonik yapıların sismolojik yöntemlerle araştırılması
Investigation of the tectonic structures forming the isparta angle through seismological methods
SELDA ALTUNCU POYRAZ
Doktora
Türkçe
2009
Jeofizik Mühendisliğiİstanbul ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ PINAR
PROF. DR. MUSTAFA KEMAL TUNÇER
- Source characteristics of 2017 Ayvacık, Lesvos and Bodrum-Kos earthquakes (Mw≥3.5) obtained from regional moment tensor inversion
2017 Ayvacık, Lesvos ve Bodrum-Kos depremlerinin (Mw≥3.5) kaynak mekanizması parametrelerinin moment tensör ters çözüm yöntemiyle belirlenmesi
ELİF BATIGÜN
Yüksek Lisans
İngilizce
2019
Jeofizik Mühendisliğiİstanbul Teknik ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
DOÇ. DR. SEDA YOLSAL ÇEVİKBİLEN
- 3-D crustal structure of the Isparta angle region from local earthquake tomography
Isparta büklümünün 3 boyutlu sismik hız yapısının yerel deprem tomografisi yöntemiyle araştırılması
ERSİN ÇAKIR
Yüksek Lisans
İngilizce
2011
Jeofizik MühendisliğiBoğaziçi ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. DR. NİYAZİ TÜRKELLİ
- Doğal gürültü tomografisinden İzmir İç Körfezi'nin 3-B üst kabuk hız yapısı
3-D upper crustal velocity structure of the Inner Gulf of Izmir from ambient noise tomography
EMRE MULUMULU
Yüksek Lisans
Türkçe
2018
Jeofizik MühendisliğiDokuz Eylül ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
DOÇ. DR. ORHAN DEDE POLAT
- 3-D velocity structure for the Sea of Marmara and surrounding region (NW Turkey) by using full waveform tomography
Marmara Denizi ve Kuzeybatı Anadolu Bölgesi üç boyutlu (3-B) hız yapısının tam dalgabiçimi tomografi yöntemi ile analizi
YEŞİM ÇUBUK SABUNCU
Doktora
İngilizce
2016
Jeofizik Mühendisliğiİstanbul Teknik ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. DR. TUNCAY TAYMAZ