Kombine çevirim santrallerinin tekno-ekonomik etüdü ve optimum termodinamik şartların belirlenmesi
Başlık çevirisi mevcut değil.
- Tez No: 46978
- Danışmanlar: Y.DOÇ.DR. RECEP ÖZTÜRK
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: Türkçe
- Üniversite: Yıldız Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 83
Özet
ÖZET Günümüzde güç üretiminin ana amacı, optimum sistemlerin kullanılma arayışı sonucu yeni sistemler üretmektir. Bu amaçla kombine çevrimli tesislerin incelenmesi ve tekno-ekonomik analizinin yapılarak tesis boyutlarının küçültülmesi ile güç eldesinin arttırılması söz konusudur. Kombine çevrim kavramının ortaya konmasının temel amacı, sistemdeki kayıp enerji miktarının geri kazanılarak, bu kayıp enerjiden ek güç eldesini içermektedir. Bu tür enerji üretim tesislerinde ulaşılmış termik verim değerleri net %55 değerindedir ve bu değerin 2000'li yıllarda % 60'lar düzeyine ulaştırılması beklenmektedir. Bunun nedenide diğer enerji üretim sistemlerine göre avantajlarının çok fazla olmasının yanısıra en önemli avantajı çevre açısından en iyi enerji üretim sistemlerinden biri olmasıdır.Bu santallerden atmosfere atılan CO, ve NOx emisyonları çevre için istenen limitlerin çok altodadır. Kombine çevrim tesislerinde, gaz türbinlerinden çıkan egzos gazlarının sahip olduğu enerjinin geri kazanılması ile buhar çevriminin şartlan iyileştirilmelidir. Bu nedenle sisteme etkiyen tekno-ekonomik parametreler belirlenmelidir. Tekno-ekonomik parametreler öncelikle gaz türbini grubunda daha sonra atık ısı kazanındaki şartlar göz önüne alınarak buhar çevrimi şartlan optimize edilerek net güç ve termik verim değerleri yükseltilebilir. Bu çalışmanın ilk bölümünde, alternatif gaz türbinlerinin optimum parametreleri incelenerek termik verim değerleri irdelenmiştir. Daha sonra kombine çevrim tesisi kavramı irdelenerek, alternatif kombine çevrim tesisleri göz önüne alınarak gelişmelere değinilmiştir. Son bölümde ise ek yakmasız ve tek basınç kademeli atik ısı kazam bulunan bir kombine çevrimin tekno ekonomik analizi yapılarak optimum termo-ekonomik parametreler belirlenmiştir. xn
Özet (Çeviri)
ABSTARCT Nowadays, the main purpose of power generation is to produce new systems as a result of the usage search of the optimum systems. So, it is considerable to examine the combined power plants and to increase their power generation by doing techno-ekonomic analysis with minimizing of the plant's dimensions. The basic purpose of suggesting combined cycle concept includes recovering of the amount of waste energy in the system and generation of supplemantary power from this energy. In these types of power plants, accessed thermal efficiency value is about %55 and this value is expected to be around %60 in 2000's. Because, combined power plants have got more advantages than the other energy generation systems have. Besides, the most important advantage of them is being one of the best systems for environment. So, these power plants emit CO, and NOx emissions which under the legal limitations. In the combined power plants, the conditions of the steam cycle should be treated by recovering energy possesed by exhaust gases exhausting from gas turbines. So, the parameters which affect the system should be determined. Techno- economic parameters are determining gas turbine groups and then waste heat boiler condition. After that overall output and thermal efficiency will be increased by optimising steam cycle conditions. In the fist chapter of this study, the thermal efficiency values were inspected by analysing optimum parameters of the alternative gas turbines. Then, combined power plant concept was inspected and touched to new developments related to the subject considering alternative combined power plants. In the last chapter, techno-economic analysis of combined cycle that consist of without supplementary firing and single stage waste heat boliler was done and optimum thermodynamic parameters were determined. xni
Benzer Tezler
- Oksiyanma teknolojisi ve karbondioksit tutumunun teknoekonomik analizi
Oxy-fuel combustion technology and techno economic analysis of carbon dioxide capture
BARIŞ OKTAY
Yüksek Lisans
Türkçe
2020
Enerjiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HASAN CAN OKUTAN
- Gazlaştırıcılı kombine çevrim santralleri ve yerli termik santrallerde performans güçlendirilmesi
Integrated gasification combined cycles and repowering of local thermal power plants
MUSTAFA ZEKİ YILMAZOĞLU
- 850 Mw doğal gaz kombine çevirim santralinde ekserji ve enerji analizi
850 Mw doğal gaz kombine çevirim santralinde ekserji ve enerji analizi
MUSTAFA SENCAN
Yüksek Lisans
Türkçe
2014
EnerjiDüzce Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ETHEM TOKLU
- Doğalgaz kombine çevrim santrallerinin Karadeniz ölçeğinde derin deniz deşarjı uygulamaları ve model çalışması
Deep sea discharge applications and model study on natural gas combined cycle plants in Black Sea
TOLGA AYERİ
Yüksek Lisans
Türkçe
2016
Deniz BilimleriOndokuz Mayıs ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. YÜKSEL ARDALI
- Kombine çevrim santrallerinde performans izleme yöntemleri
Performance monitoring methods in combined cycle power plants
RUFİ ÖZGÜR
Yüksek Lisans
Türkçe
2011
Makine MühendisliğiYıldız Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SÜLEYMAN HAKAN SEVİLGEN