Kompozit malzeme üretiminde ortaya çıkan stiren gazı emisyonunun azaltılması
Reducing of styrene gas emission during production of composite materials
- Tez No: 483744
- Danışmanlar: DOÇ. DR. MEHMET AZMİ AKTACİR
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Harran Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Bu çalışmada Cam elyaf takviyeli plastik boru üretimi yapan tesiste üretim prosesi sonucu meydana gelen insan sağlığına zararlı kanserojen ve mutajen bir bileşik olan Stiren emisyonunun azaltılarak ortamdan uzaklaştırılması amaçlanmıştır. Bu amaçla ortamdaki havalandırma ve egzoz sistemlerinin verimlilikleri ölçülerek karşılaştırılmıştır. Karşılaştırma sonrası mevcut durum ortaya konulmuştur. Ayrıca ortamdaki dikdörtgen kesitli kanalda hava akışı hesaplamalı akışkanlar dinamiği yazılımı ile incelenmiştir. Yapılan ölçüm, karşılaştırma ve analizlerin sonuçları detaylı olarak paylaşılmıştır. Sonuçta Stiren emisyonunun çalışma ortamında azaltılarak, acil bir şekilde ortamdan tahliyesi ile ilgili çözüm ve önerilerde bulunulmuştur.
Özet (Çeviri)
In this study, it was aimed to decrease the emission of styrene which is harmful carcinogen and mutagenic compound which is harmful to human health, which is the result of the production process of GRP pipe production. For this purpose, the efficiency of ventilation and exhaust systems in the environment was measured and compared. After the comparison, the current situation is revealed. In addition, the airflow computed fluids in the environment have also been examined with the CFD software. The results of the measurements, comparisons and analyzes made are shared in detail. As a result, Stiren's emissions have been reduced in the working environment and solutions and suggestions have been made for immediate release from the environment.
Benzer Tezler
- Numerical and experimental investigation on the crushing behaviour of auxetic lattice cells produced with additive manufacturing techniques
Eklemeli imalat teknikleri ile üretilmiş ökzetik kafes yapıların ezilme davranışlarının nümerik ve deneysel olarak incelenmesi
KADİR GÜNAYDIN
Doktora
İngilizce
2020
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİT SÜLEYMAN TÜRKMEN
DR. ÖĞR. ÜYESİ ANTONIO MATTIA GRANDE
- Atık külün geopolimer kompozit malzeme üretiminde kullanımı
Using waste ashes in the production of geopolymer composite material
TÜRKAN VURAL
Yüksek Lisans
Türkçe
2019
Çevre MühendisliğiNiğde Ömer Halisdemir ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. NESLİHAN DOĞAN SAĞLAMTİMUR
- Polyester esaslı taneli kompozitlerin (mermerit) bazı fiziksel ve mekanik özelliklerine bileşenlerinin etkisi
Effect of component specificity on some physical and mechanical properties of granulated composites with polyester matrix (artificial marble)
OKTAR SOYKAN
Yüksek Lisans
Türkçe
2012
Mühendislik BilimleriSüleyman Demirel ÜniversitesiYapı Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. CENGİZ ÖZEL
- Comparison of the automotive bumper produced with different composite materials using the finite elements method
Sonlu elemanlar yöntemi kullanılarak farklı kompozit malzemelerle üretilen otomotiv tamponunun karşılaştırılması
FETHİYE YALÇIN
Yüksek Lisans
İngilizce
2022
Otomotiv MühendisliğiÇukurova ÜniversitesiOtomotiv Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ÖZCANLI
- Manufacturing and characterization of polymer composites by using selective laser sintering 3D printing method
Seçici lazer sinterleme 3D baskı yöntemiyle polimer kompozitlerin üretim ve karakterizasyonu
BURÇİN ÖZBAY
Doktora
İngilizce
2021
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. İBRAHİM ERSİN SERHATLI