Geri Dön

Betonarme perde ve çerçeveli yapılarda perde boyutlandırması ve yerleşiminin deprem davranışına etkisi

The effect of reinforced concrete shear wall dimensions and configuration on seismic behavior of frame-shear wall structures

  1. Tez No: 486671
  2. Yazar: GÖKHAN KAYA
  3. Danışmanlar: YRD. DOÇ. DR. AYŞE ELİF ÖZSOY ÖZBAY
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: Türkçe
  9. Üniversite: Beykent Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Deprem Riskli Yapılar ve Kentsel Dönüşüm Bilim Dalı
  13. Sayfa Sayısı: 108

Özet

Levha hareketleri nedeniyle birikmiş gerilme enerjisinin aniden boşalmasıyla oluşan depremler, dünyada ve ülkemizde yarattığı etki bakımından doğal afetlerin başında gelmektedir. Coğrafi olarak dünyadaki en etkin deprem kuşaklarından biri üzerinde yer almakta olan Türkiye, deprem riskinin fazla olduğu ülkeler arasındadır. Yapılarda taşıyıcı sistemin doğru düzenlenmesi, taşıyıcı elemanların boyutlandırılması ve yerleşimi, yapının deprem davranışını önemli derecede etkilemektedir. Günümüz teknolojik koşullarında oluşabilecek depremlerin zamanını bilmemiz mümkün değildir. Fakat depreme dayanıklı yapılar inşa etmemiz mümkündür. Deprem etkisi altında çok katlı betonarme yapıların yer değiştirmelerinin sınırlandırılması, yeterli rijitlik ve dayanıma sahip olması için çerçeve sistemlerde perde kullanımı kaçınılmaz olmaktadır. Perdenin taşıyıcı sistemdeki boyutu ve plandaki konumu yatay yükler altındaki davranışı etkilemektedir. Bu tez çalışmasında, Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik-2007 (DBYBHY-2007) referans alınarak deprem yükü hesap yöntemlerinden“Eşdeğer Deprem Yükü Yöntemi”kullanılmıştır. Betonarme perde ve çerçeveli yapıların farklı doğrultularına, çeşitli boyutlarda perdeler yerleştirilmesinin yapının deprem davranışına olan etkisi analiz edilmiş ve incelenmiştir.

Özet (Çeviri)

Earthquakes are among the most frequent natural disasters causing economic and physical loss in the World. Turkey is one of the countries located on active seismic zones with potential seismic risk. The primary stage for aseismic design of structures is the decision of the structural engineer on the most effective structural system in the preliminary design of a building. The national earthquake design codes are the key references for detailed seismic evaluation and the design of structures as well as the preliminary design of the structural systems. The use of reinforced concrete structural walls is inevitable for multistory framed structures especially for the buildings located on the seismic regions. The reinforced concrete structural walls contribute to the overall lateral stiffness of the building, resisting the lateral loads and limiting the interstory drift ratio at the story levels. The location and dimensions of the shear walls in the plan are the essential parameters effecting the dynamic behavior of the building. Within the scope of this study, the effect of structural system layout in the plan for multistory reinforced concrete frame-shear wall structures is analyzed using“The Equivalent Lateral Force Analysis”stated in the Turkish Seismic Code (DBYBHY-2007). The analysis has been conducted on three dimensional numerical models with varying structural system configurations to determine the effects of shear wall dimensions and location on the structural behavior.

Benzer Tezler

  1. Betonarme yüksek yapılarda kullanılabilecek taşıyıcı sistemler ve perde-çerçeveli bir yapının statik ve dinamik hesabı

    Structural systems for tall reinforced concrete buildings and static and dynamic analysis of a shearwall-frame system

    GÖKHAN POLAT

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ.DR. TÜLAY AKSU ÖZKUL

  2. Çok katlı betonarme binalarda taşıyıcı sistem türlerinin davranışlarının incelenmesi

    Invastigation of structural system behaviours on reinforced concrete multi storey buildings

    BERK ÖZLÜ

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. TURGUT ÖZTÜRK

  3. DBYBHY 2007'ye göre tasarlanmış olan bir binanın doğrusal elastik olmayan yöntemlere göre performansının değerlendirilmesi

    Performance assessment of a new building designated according to Turkish earthquake code by nonlinear elastic methods

    MEŞA DEMİRBAĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. KONURALP GİRGİN

  4. Kütle ve döşeme düzensizliği bulunan çok katlı kaset döşemeli bir yapının tasarımı

    Design of multi storey grid slabbed building having a slab and mass irregularity

    ERDEM MUSTAFA ERDEM

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. KADİR GÜLER