Geri Dön

Farklı metal porselen alaşımların ve tekrarlanan fırınlamaların dentin porselenin rengine etkisi

The Effect of different metal porcelain alloys repeated firings on the color of dentin porcelain

  1. Tez No: 48973
  2. Yazar: ERCÜMENT BELLİ
  3. Danışmanlar: DOÇ.DR. BÜLENT KESİM
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1995
  8. Dil: Türkçe
  9. Üniversite: Selçuk Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 72

Özet

58 SUMMARY The Effect of Different Metal Porcelain Alloys and Repeated Firings on the Color of Dentin Porcelain In this study, the effect of different metal porcelain alloys and repeated firing on the color of dentin porcelain and hue, value, chroma changes were investigated. Seven different metal porcelain alloys were used in the study. Ten test specimens approximately 1 lxl lxl mm. diameters were made from each alloy. Each test specimen was oxidated and 0.3 mm. opaque porcelain and 0.8 mm. dentin porcelain were applied. Test specimens had natural glaze. Standard, five and ten repeated firing cycles applied test specimens colour measuring procedures were made with a chroma-meter which is used in CIE Colour System and transferred to the computer. All metal porcelain alloys, apart from Cu containing high palladium alloy, can be used for PFM restorations by following manufacturer's instructions and applying sufficient thickness of opaque and dentin porcelain, then firing these materials in standard firing cycles. The total colour change should be coNsidered seriously in PFM restorations when the Au-Pd alloy is59 subjected to firing cycles up to five times as to standard firing cycles. Repeated firings of the PFM restorations for ten times should definitely be omitted after standard firing cycles.

Özet (Çeviri)

58 SUMMARY The Effect of Different Metal Porcelain Alloys and Repeated Firings on the Color of Dentin Porcelain In this study, the effect of different metal porcelain alloys and repeated firing on the color of dentin porcelain and hue, value, chroma changes were investigated. Seven different metal porcelain alloys were used in the study. Ten test specimens approximately 1 lxl lxl mm. diameters were made from each alloy. Each test specimen was oxidated and 0.3 mm. opaque porcelain and 0.8 mm. dentin porcelain were applied. Test specimens had natural glaze. Standard, five and ten repeated firing cycles applied test specimens colour measuring procedures were made with a chroma-meter which is used in CIE Colour System and transferred to the computer. All metal porcelain alloys, apart from Cu containing high palladium alloy, can be used for PFM restorations by following manufacturer's instructions and applying sufficient thickness of opaque and dentin porcelain, then firing these materials in standard firing cycles. The total colour change should be coNsidered seriously in PFM restorations when the Au-Pd alloy is59 subjected to firing cycles up to five times as to standard firing cycles. Repeated firings of the PFM restorations for ten times should definitely be omitted after standard firing cycles.

Benzer Tezler

  1. Farklı fırınlamaların metal porselen bağlantısı üzerindeki rolü

    Başlık çevirisi yok

    MEHMET DALKIZ

    Doktora

    Türkçe

    Türkçe

    1992

    Diş HekimliğiGATA

    Protetik Diş Tedavisi Ana Bilim Dalı

  2. Tekrarlanan döküm işleminin temel metal alaşımında biyouyumluluk üzerindeki etkisinin in vitro değerlendirilmesi

    In vitro evaluation of the effect of recasting on biocompatibility of base metal alloy

    PINAR DURKAYA

    Doktora

    Türkçe

    Türkçe

    2013

    Diş HekimliğiAnkara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. GÜLAY KANSU

  3. Farklı üretim teknikleriyle hazırlanmış metal alt yapılar ile üzerlerine pişirilmiş porselenlerin bağ dayanımlarının değerlendirilmesi

    Evaluation of bond strength of metal substructures prepared by different production techniques and porcelaines

    EBRU NUR IŞIK

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2017

    Diş HekimliğiEge Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. AKIN ALADAĞ

  4. Porselen pişirme işleminin farklı alaşımların kole uyumuna etkisi üzerine araştırmalar

    Effect in marginal fit of different alloys in the porcelain firing procedure

    MEHMET CUDİ BALKAYA

    Doktora

    Türkçe

    Türkçe

    1996

    Diş Hekimliğiİstanbul Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. EMİNE HALİDE NAYIR PAMUK