Çimento sektöründe optimal dağılım: ulaştırma problemi ve hedef programlama ile çimento fabrikalarına uygulanması
Optimal distribution in the cement sector: transportation problem and goal programming with application to the cement factories
- Tez No: 505523
- Danışmanlar: PROF. DR. ŞENOL ALTAN
- Tez Türü: Yüksek Lisans
- Konular: Ekonometri, Econometrics
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sosyal Bilimler Enstitüsü
- Ana Bilim Dalı: Ekonometri Ana Bilim Dalı
- Bilim Dalı: Yöneylem Araştırması Bilim Dalı
- Sayfa Sayısı: 114
Özet
Özellikle birçok amacın olduğu işletmeler için karar verme süreci oldukça önemlidir. Bu aşamada en önemli etken modelin kurulmasıdır. Doğrusal programlamada amaç fonksiyonu tek hedefe odaklanırken hedef programlamada birbirleriyle çelişik birden fazla hedef bulunmaktadır. Çalışmada ulaştırma modeli temel alınarak hedef programlama kullanımı ile taşıma problemlerine alternatif bir çözüm bulma amaçlanmıştır. Bu amaç için ilk aşamada Ülkemizde Çimento sektöründe faaliyet gösteren fabrikalardan talep noktalarına olan dağıtım temel problem olarak ele alınmıştır. Ulaştırma modeli oluşturulurken her bir bölgenin coğrafi olarak bir şehri merkez alınarak arz ve talep noktaları coğrafi bölgeler olarak tespit edilmiştir. Marmara Bölgesi İstanbul, Ege Bölgesi İzmir, Akdeniz Bölgesi Antalya, İç Anadolu Bölgesi Ankara, Karadeniz Bölgesi Samsun, Doğu Anadolu Bölgesi Van ve Güneydoğu Anadolu Bölgesi Şanlıurfa şehirleri ile temsil edilmiştir. Çalışmada Coğrafi bölgeler için kurulan ulaştırma modelinden yararlanılarak optimum dağıtım elde edilmiştir. İkinci aşamada ise birinci aşamadaki sonuçlara dayalı olarak toplam maliyeti minimize etmek ve arz merkezlerinden talep merkezlerine gönderilecek toplam mal miktarı olan çimento miktarının da toplam talep ya da arz miktarlarına eşit olması biçiminde iki hedef belirlenerek bu hedeflerin gerçekleşip gerçekleşmeyecekleri hedef programlama kapsamında değerlendirilmiştir. Sonuçta WinQSB paket programıyla elde edilen bulgulara göre her iki hedefin de sağlandığı görülmüştür.
Özet (Çeviri)
The decision making process is particularly important for businesses with many purposes. The most important factor in this phase is the establishment of a model. In linear programming, while the objective function is focused on a single target, there are more than one goals contradictory to each other in the target program. It is aimed to find an alternative solution to transportation problems by using goal programming based on transportation model. For this purpose, the distribution to the demand points from the factories operating in the cement sector in the first stage in our country is considered as the basic problem. While the transportation model was established, each region was geographically located as a city center and the supply and demand points were determined as geographical regions. Marmara Region Istanbul, Aegean Region İzmir, Mediterranean Region Antalya, Central Anatolia Region Ankara, Black Sea Region Samsun, Eastern Anatolia Region Van and Southeastern Anatolia Region Şanlıurfa. In the study, optimal distribution was obtained by using the transportation model established for the geographical regions. In the second stage, based on the results of the first stage, the targets were determined to be achieved by determining two targets: minimizing the total cost and ensuring that the amount of cement, which is the total amount of goods sent from the supply centers to the demand centers, is equal to the total demand or supply. As a result, WinQSB showed that both targets were provided according to the findings obtained with the package program.
Benzer Tezler
- Türkiye çimento sektöründe optimal dağılım ulaştırma probleminin bulanık doğrusal programlama ile çimento fabrikalarına uygulanması
Optimal distribution in Turkey cement sector: Application to cement factory of transportation problem with fuzzy linear programming
LEVENT ÜNALAN
- Pazarlamada rekabet gücünü belirleyici bir faktör olarak fiyat-dağıtım yapısı ilişkisi ve Türkiye Çimento Sanayii uygulaması
Başlık çevirisi yok
A.CİHAT GÜNDÜZ
- İmalat sektöründe uygun bakım ve stratejisinin belirlenmesi için bir yöntem tasarımı ve uygulaması
Design and implementation of a method for determining the optimum maintenance policy in manufacturing sector
ÇAĞATAY TEKE
Doktora
Türkçe
2018
Endüstri ve Endüstri MühendisliğiSakarya ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MÜMTAZ İPEK
- Finansal kaldıraç kullanımının karlılığa etkisi: BİST çimento sektöründe bir uygulama
The effect of financial leverage usage on profitability: An application in the BIST cement sector
MUHAMMET TUĞRUL ÖZEN
Yüksek Lisans
Türkçe
2017
İşletmeÇağ Üniversitesiİşletme Yönetimi Ana Bilim Dalı
YRD. DOÇ. DR. AHMET GÖKHAN SÖKMEN
- Çimento hammaddelerinin özellikleri, optimizasyonu ve SURPAC 2000 ile bir saha çalışması
Başlık çevirisi yok
İSMET GÜÇLÜ KATIRCIOĞLU
Yüksek Lisans
Türkçe
1998
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HASAN ERGİN