Preparation of polymer carbon-nanotube based composide electrodes and application to determination of serotonin
Polimer karbon nanotüp temelli kompozit elektrotların hazırlanması ve serotonin tayinine uygulanması
- Tez No: 514730
- Danışmanlar: PROF. DR. ZEKERYA DURSUN
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: İngilizce
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 83
Özet
Bu tez kapsamında, camımsı karbon elektrot yüzeyinde çok duvarlı karbon nanotüp ve/veya polianilinden oluşmuş etkinliği yüksek kompozit modifiye yüzeyler hazırlanarak, morfolojik, kimyasal ve elektriksel yüzey özellikleri aydınlatıldıktan sonra, seratoninin elektrokimyasal davranışı farklı pH larda incelenmiştir. Yalın ve kompozit elektrotlarda serotoninin pik akım yüksekliği ve pik potansiyelleri karşılaştırıldığında en uygun çalışma pH'ının 7.4 fosfat tamponu olduğu saptanmıştır. Aynı zamanda pH=7.4 fosfat tamponu ortamında tüm elektrotların serotonin yükseltgenmesine davranışları incelendiğinde, polianilin-çok duvarlı karbon nanotüp kompozit elektrodun (MWCNT-PANI/GCE) en yüksek etkinliğe sahip olduğu saptanmıştır. Polianilinin elektrot yüzeyinde oluşturulmasına ilişkin, anilin derişimi ve döngüsel voltammetrik döngü sayısı optimize edilmiştir. Optimum deney koşulları saptandıktan sonra, differansiyel puls voltammetrik teknikle serotonin duyar tayinine yönelik deneysel çalışmalar yalın camımsı (GC), PANI/GC, MWCNT/GC, PANI/MWCNT/GC ve MWCNT/PANI/GC elektrotlarıyla yapılmıştır. En yüksek etkinliğe sahip olan elektrodun kompozit yapıdaki MWCNT/PANI/GC elektrodu olduğu saptanmıştır. MWCNT/PANI/GC kompozit elektrotta pik akım yüksekliğinin serotoninin derişimi ile değişimi 1x10-7 – 1.2x10-5 mol L-1 aralığında doğrusal bulunurken, belirtme alt sınırı ise 3.33x10-8 mol L-1 olarak saptanmıştır (S/N=3). Hazırlanan kompozit elektrotların yüzey morfolojisi, kimyasal yapısı ve elektriksel özellikleri taramalı elektron mikroskobu(SEM), X-ışını fotoelektron spektroskopisi (XPS) ve elektrokimyasal impedans tekniği ile aydınlatılmıştır.
Özet (Çeviri)
In this thesis study, highly active multi-walled carbon nanotube and/or polyaniline based composite structures were fabricated onto glassy carbon electrode surfaces and then the morphological, chemical and electrical properties of these electrodes surface were characterized. The prepared composite electrodes were used to examine the electrochemical behavior of serotonin at different pHs. When peak currents and peak potentials of serotonin on bare and composite electrodes were compared for different pH's of sopperting electrolyte, the optimum working pH was obtained as 7.4 by using phosphate buffer solution. On the other hand, the best electrocatalytic activity toward serotonin was obtained with multiwalled-polyaniline nanotube composite electrode (MWCNT-PANI/GCE) in pH 7.4 phosphate buffer solution. The formation of polyaniline on the GCE with cyclic voltammetry was optimized by varying aniline monomer concentration and the cycle number. After the optimization of experimental conditions, The differential pulse voltammetry studies were performed for sensitive and selective determination of serotonin with all electrodes. The fabricated MWCNT/PANI/GC composite electrode showed best electrochemical activity for serotonin oxidation at optimum conditions. A wide linear calibration curve was obtained within the concentration range between 1x10-7 to 1.2x10-5 mol L-1 pH 7.4 phosphate buffer solution with the limit of detection 3.33x10-8 mol L-1 (S/N=3) with MWCNT/PANI/GCE. The composite electrodes surface morfology, chemistry and electrcity were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy(XPS) and electrochemical impedance spectroscopy(EIS).
Benzer Tezler
- Nano boyutlu modifiye katalizörler üzerinde alkollerin elektrooksidasyonu
Electrooxidation of alcohols on nanosized modified catalysts
MÜGE CİVELEKOĞLU ODABAŞ
- Süper kapasitörler için bağlayıcısız nikel içeren grafen köpük elektrotunun tek adımda hazırlanması
One-step preparation of binder-free nickel containinggraphene foam electrode for supercapacitors
AZIZ AHMAD KARIMI
Yüksek Lisans
Türkçe
2023
Kimyaİzmir Katip Çelebi ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. ŞERAFETTİN DEMİÇ
DOÇ. DR. BURAK GÜLTEKİN
- Preparation and application of metal oxide and metal nano particles modified carbon based composite electrodes for simultaneous determination of adenine and guanine
Adenin ve guaninin eş anli tayini için metal oksit ve metal nanoparçacık ile modifiye karbon temelli kompozit elektrotların hazırlanması ve uygulanması
MERVE AKTÜRK
- Preparation and characterization of graphene based nanocomposite electrodes and their electrochemical applications
Grafen temelli̇ nanokompozi̇t elektrotlarin hazırlanması, karakteri̇zasyonu ve elektroki̇myasal uygulamalari
MÜGE ŞATIR
- Conductive polymer nanocomposites of polypropylene and organic field effect transistors with polyethylene gate dielectric
Polipropilen iletken nanokompozitleri ve polietilen kapı dilektrikli organik alan etkili transistörler
YASİN KANBUR
Doktora
İngilizce
2011
Polimer Bilim ve TeknolojisiOrta Doğu Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Bölümü
PROF. DR. ZUHAL KÜÇÜKYAVUZ