Geri Dön

The design of a novel home exercise device for the rehibilitation of stroke patients with upper limb hemiplegia

Başlık çevirisi mevcut değil.

  1. Tez No: 519149
  2. Yazar: BERK SAMİ GÖNÜL
  3. Danışmanlar: Dr. ROBERT RAYNER
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mekatronik Mühendisliği, Mechanical Engineering, Mechatronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: İngilizce
  9. Üniversite: Kingston University
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 94

Özet

Özet yok.

Özet (Çeviri)

This paper presents the process for the study of a novel exercise device for the hemiplegic stroke patients. Initially, the stroke concept has been studied through the reviewed literature. Industrial standards were followed in order to set the baseline and the requirements for the design and development stages. The general layout of the design process was presented within the quality management system documentation. The conceptual design was constructed within the CAD environment of NX and risk analysis activity was carried out to verify the current design by identifying potential hazards and taking necessary precautions. Further analysis has been performed by motion simulation in order to evaluate the functionality of the mechanisms within the device. Cost analysis was applied in order to evaluate the current state of the design in terms of material selection and cost of production. As last, the device was rapid prototyped for further analysis. Overall, the novel study of the medical device presented accurate results however further testing should be applied on the current design in order to validate design and development stages by using the performance output of the hemiplegic stroke patients that will be obtained by clinical trials.

Benzer Tezler

  1. Design, implementation and control of rehabilitation robots for upper and lower limbs

    Üst ve alt ekstrimite rehabilitasyon robotlarının tasarımı, uygulaması ve kontrolü

    MEHMET ALPER ERGİN

    Yüksek Lisans

    İngilizce

    İngilizce

    2011

    Mühendislik BilimleriSabancı Üniversitesi

    Mekatronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. VOLKAN PATOĞLU

  2. Takım çalışması esaslı demontaj hattı için optimizasyon yaklaşımı: Beyaz eşya endüstrisinde bir uygulama

    An optimization aprroach for balancing multi-manned disassembly lines: An application from white goods industry

    DİCLE ASLAN

    Doktora

    Türkçe

    Türkçe

    2019

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. EMRE ÇEVİKCAN

  3. Design of a novel controller for a residential home tied to smart grid

    Akıllı şebeke bağlı bir konutlar için yeni bir kontrol cihaz tasarımı

    ANAS RIZIK SALEM ABUZNAID

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Elektrik ve Elektronik Mühendisliğiİstanbul Aydın Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. NEDİM TUTKUN

    DR. ÖĞR. ÜYESİ NUR SARMA

  4. Bulaşık makinesinde inovatif hızlı kurutma yöntemi tasarımı ve yöntem parametrelerinin deneysel olarak incelenmesi

    Design of a novel quick drying method in dishwasher and experimental investigation of method's parameters

    RAHMİ MERT AKKÜLAH

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MURAT ÇAKAN