Powder pulse plating
Başlık çevirisi mevcut değil.
- Tez No: 523557
- Danışmanlar: Prof. ANDREW P. ABBOTT, Prof. KARL S. RYDER
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: İngilizce
- Üniversite: University of Leicester
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 216
Özet
Özet yok.
Özet (Çeviri)
Electroplating is a common method of obtaining metallic coatings on a surface. Generally, the metal salt is introduced into solution and a direct current is applied to the material that is to be coated. In this thesis, an alternative approach is investigated, namely the metal is introduced onto the metal surface as a powder and a pulsed current is applied to firstly dissolve some of the powder and the polarity is reversed so that the metal is then deposited. This fuses the powder to itself and to the substrate. In the current study, deep eutectic solvents were used as the electrolytes and two metals were chosen; zinc and copper. Initially the dissolution and deposition of the pure metals were investigated. It was found that far from being simple dissolution and deposition processes insoluble films were formed on the electrode surface during both deposition and dissolution for zinc and during dissolution for copper. Powder pulse plating was successfully demonstrated if the current pulse characteristics were kept within a window of size and duration which avoided these insoluble films. It was found that large metallic particles could be used when the substrate was held in a horizontal orientation and small particles were best when the electrode was held vertically. For both metals it was demonstrated that super-efficient deposition could be obtained (Faradaic current efficiency in the cathodic pulse > 100%). It was also shown that composite materials could be produced by mixing inert particles with the metallic powder.
Benzer Tezler
- Bakırın elektrospark mikroalaşımlandırma yöntemi ile gümüşle kaplanması
Silver plating of copper with the method of electro sparks micro-alloying
ATİLLA BAŞARGAN
Yüksek Lisans
Türkçe
2010
Metalurji MühendisliğiGebze Yüksek Teknoloji EnstitüsüMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. KEMAL KORKMAZ
- Effects of pulse parameters on surface properties of silver coatings on copper substrates
Bakır üzerine kaplanan gümüşün yüzey özelliklerine darbe parametrelerinin etkisi
CANER BAŞARAN
Yüksek Lisans
İngilizce
2019
KimyaOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. İSHAK KARAKAYA
- Elektrokaplama yöntemiyle Sn-Cu/ÇDKNT nanokompozit anotların üretimi ve li-iyon pillerde uygulaması
Sn-Cu / MWCNT nanocomposite anode production by electroplating method and application in li-ion batteries
HARUN GÜL
Doktora
Türkçe
2015
EnerjiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET ALP
- Bilgisayar kontrollü çok fonksiyonlu akım kaynağı tasarımı ve uygulamaları
Computer controlled multifunctional current source design and applications
GÜLÇİN MÜHÜRCÜ
Doktora
Türkçe
2021
Mühendislik BilimleriTarsus Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KEMAL KÜLEKCİ
- Sm2(CO3)3 ve Nd2(CO3)3 çözebilecek derin ötektik sıvıların geliştirilmesi ve bu karbonatların elektrokimyasal aktivasyona karşı tepkisinin araştırılması
Development of deep eutectic liquids that can solve Sm2(CO3)3 and Nd2(CO3)3 and investigation of the response of these carbonates to electrochemical activation
HACI MEHMET AYDOĞDU
Yüksek Lisans
Türkçe
2023
KimyaMunzur ÜniversitesiStratejik Hammaddeler ve İleri Teknoloji Uygulamaları Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SALİH CİHANGİR