Geri Dön

Aktif karbon@FexMnyOz kompoziti ile eser metal iyonlarının katı faz ekstraksiyonu

Solid-phase extraction of trace metal ions with activated carbon@FexMnyOz composite

  1. Tez No: 536429
  2. Yazar: VEYSEL BERKDEMİR
  3. Danışmanlar: PROF. DR. ŞERİFE TOKALIOĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Kompozit, sentez ve karakterizasyon, dispersif katı faz ekstraksiyonu, bakır(II), kurşun(II), alevli atomik absorpsiyon spektrometresi, Composite, synthesis and characterization, dispersive solid phase extraction, copper(II), lead(II), flame atomic absorption spectrometer
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Erciyes Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 106

Özet

Bu çalışmada, eser düzeydeki Cu(II) ve Pb(II)'nin sentezlenen aktif karbon kompoziti (AC@FexMnyOz) üzerinde zenginleştirilmesi ve ayrılması için yeni bir dispersif katı faz ekstraksiyon yöntemi geliştirildi. Örneklerde bulunan Cu ve Pb tayini alevli atomik absorpsiyon spektrometresi ile yapıldı. Sentezlenen kompozit, taramalı elektron mikroskobu, X-ışını kırınımı, Brunauer-Emmett-Teller yüzey alanı ve zeta potansiyel ölçümleri ile karakterize edildi. Cu(II) ve Pb(II) iyonlarının geri kazanma değeri üzerinde pH, adsorpsiyon ve elüsyon etkileşim süreleri, elüent cinsi, derişimi ve hacmi, örnek çözeltisi hacmi, adsorban miktarı ve matriks etkisi gibi analitik parametrelerin etkisi araştırıldı. Optimum şartlarda Cu(II) ve Pb(II)'nin geri kazanma değerleri ≥ % 95 olarak elde edildi. Metal iyonlarının tutunması için optimum pH değeri 6 olarak bulundu. Kantitatif elüsyon için elüent, 3 mL 2 M HNO3 olarak seçildi. Kompozitin adsorpsiyon kapasitesi Cu(II) ve Pb(II) için, sırasıyla, 15,0 mg g-1 ve 26,8 mg g-1 olarak bulundu. Yöntemin kesinliği % bağıl standart sapma olarak hesaplandı. Cu(II) ve Pb(II) için gün içi tekrarlanabilirlik, sırasıyla, % 1,3 ve % 2,8 olarak bulunurken, günler arası tekrarlanabilirlik, sırasıyla, % 3,3 ve % 3,5 olarak bulundu. Adsorbanın yeniden kullanılabilirliği 40 olarak belirlendi. Metodun zenginleştirme faktörü (ZF) 33,3 olarak elde edildi. Bu ZF değeri dikkate alındığında, yöntemin gözlenebilme sınırı değerleri, Cu(II) için 0,46 µg L-1 ve Pb(II) için 2,68 µg L-1 olarak hesaplandı. Geliştirilen yöntemin doğruluğu, üç sertifikalı referans maddenin (TMDA 53.3 Lake Water, SPS-WW1 Wastewater, BCR 482 Lichen CRM) analizi ve örneklerdeki geri kazanma çalışmaları ile test edildi. Elde edilen sonuçların, sertifikalı değerler ile iyi bir uyum içerisinde olduğu görüldü. Geliştirilen yöntem, su (çeşme suyu, atık su, kuyu suyu), çay ve liken örneklerinde eser düzeyde bulunan Cu(II) ve Pb(II) tayini için başarılı bir şekilde uygulandı.

Özet (Çeviri)

In this study, a new dispersive solid phase extraction method was developed for the enrichment and separation of trace amount of Cu(II) and Pb(II) on the activated carbon composite (AC@FexMnyOz) which is synthesized as an adsorbant. The determination of Cu(II) and Pb(II) in the samples was performed with the flame atomic absorption spectrometry. The synthesized composite was characterized by scanning electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller surface area and zeta potential measurements. The effect of analytical parameters such as pH, adsorption and elution interaction times, elution type, concentration and volume, sample solution volume, adsorbent amount and matrix effect on the recovery value of Cu (II) and Pb (II) ions were investigated. Recovering values of Cu (II) and Pb (II) at optimum conditions were obtained as ≥ 95 %. The optimum pH of the metal ions was found to be 6. The eluent for quantitative elution was selected as 3 mL 2 M HNO3. The adsorption capacity of the composite was found to be 15.0 mg g-1 and 26.8 mg g-1 for Cu (II) and Pb (II), respectively. The precision of the method was calculated with the relative standard deviation. While the intraday repeatability for Cu (II) and Pb (II) was found to be 1.3 % and 2.8 %, respectively, repeatability between days was found to be 3.3 % and 3.5 %, respectively. The re-usability of the adsorbent was determined to be 40. The enrichment factor (ZF) of the method was obtained to be 33.3. Considering this ZF value, the dedection limit values of the method were calculated to be 0.46 µg L-1 for Cu (II) and 2.68 µg L-1 for Pb (II). The accuracy of the developed method was tested by analysis of the three certified reference materials (TMDA 53.3 Lake Water, SPS-WW1 Wastewater, BCR 482 Lichen CRM) and recovery studies in the samples. The results were in good agreement with certified values. The developed method was successfully applied for the determination of trace amount of Cu (II) and Pb (II) in water (tap water, wastewater, well water), tea and lichen samples.

Benzer Tezler

  1. Production and characterization of activated carbon from pyrolysis of copolymers

    Kopolimerlerin pirolizinden aktif karbon ürertimi ve karakterizasyonu

    ARZU ÖZTÜRK

    Yüksek Lisans

    İngilizce

    İngilizce

    1999

    Kimya MühendisliğiOrta Doğu Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. HAYRETTİN YÜCEL

  2. Şeker pancarı küspesinden aktif karbon elde edilmesi ve karakterizasyonu ve Cu(II) iyonlarının adsorpsiyonunda kullanılması

    Production of activated carbon from sugar beet pulp, its characterisation and use in adsorption of Cu(II) ions

    MUHAMMET ŞABAN TANYILDIZI

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Kimya MühendisliğiFırat Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. AHMET ÖZER

  3. Çözelti ortamında bulunan bazı organik maddelerin ticari aktif karbon ve çeşitli yöntemlerle elde edilen aktif karbonlar üzerindeki adsorpsiyonlarının incelenmesi

    An Investigation of adsorptions of some organic compounds found in solutions on commercial activated carbon and other active carbons derivated by different methods

    ALİ RIZA KUL

    Doktora

    Türkçe

    Türkçe

    1999

    KimyaYüzüncü Yıl Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. HASAN CEYLAN

  4. Aktif karbon destekli Co-B katalizörü kullanılarak sodyum borhidrür hidrolizi ile hidrojen üretilmesi

    Production of hydrogen by sodium borohyride hydrolysis using activated carbon Co-B catalyst

    BAŞAK BUSE İŞÇİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Kimya MühendisliğiEskişehir Osmangazi Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. MİNE ÖZDEMİR

  5. Aktif karbon-nikel oksit nanokompozitin fuzzy mantık sistemi ile sentezlenmesi ve uranyum gideriminin yüzey yanıt yöntemi ile modellenmesi

    Synthesis of activated carbon–nickel oxide nanocomposite by fuzzy logic system and modelling with response surface methodology for uranium removal

    CANSU ENDES YILMAZ

    Doktora

    Türkçe

    Türkçe

    2022

    Nükleer MühendislikEge Üniversitesi

    Nükleer Bilimler Ana Bilim Dalı

    PROF. DR. YÜKSEL ALTAŞ

    DOÇ. DR. CEREN KÜTAHYALI ASLANİ